Evak Hippo range
The Evak Hippo range is a family of cast iron submersible sewage pumps with a recessed vortex impeller — built for raw sewage, soiled wastewater and heavy rainwater in domestic, commercial and pump-station duty. Three series, sized by outlet and free passage: Hippo 50 (2″ threaded, 50 mm solids), Hippo 65 (DN65 flanged, 65 mm) and Hippo 80 (DN80 flanged, 76 mm). Motors from 0.37 kW to 4.1 kW, flows to 1,350 L/min and heads to 22.5 m.
Every Hippo shares the same build: FC200 cast iron volute, stainless steel motor housing, EKK Eagle Burgmann double mechanical seal in an oil bath, Class F motor with auto-reset thermal protection, IP68 to 10 m submersion, and 10 m of H07RN-F cable. The 50 series is a free-standing pump for sumps, chambers and portable use; the 65 and 80 are pump-station pumps with a flanged discharge.
| Series | Outlet | Solids | Power | Max flow / head | Best for |
|---|---|---|---|---|---|
| Hippo 50 | 2″ threaded | 50 mm | 0.37–1.5 kW | 720 L/min / 16.8 m | Domestic sumps, small chambers, portable and hire use. 110V, 230V and 400V. |
| Hippo 65 | DN65 flanged | 65 mm | 1.1–4.1 kW | 1,200 L/min / 22.5 m | Pump stations with longer rising mains. 230V to 65-200, 400V above. |
| Hippo 80 | DN80 flanged | 76 mm | 1.1–4.1 kW | 1,350 L/min / 18.5 m | Blockage-prone and high-volume stations. Biggest solids, most flow, less lift. |
27 products
The Evak Hippo 50-50 (110V) is the entry-point sewage pump in the Hippo range, in the UK construction-market 110V CTE variant for use with standard…
The Evak Hippo 50-50 (230V) is the entry-point sewage pump in the Hippo range, in 230V single-phase for standard domestic mains supply. 0.37 kW / 0.5 HP…
The Evak Hippo 50-50 (400V) is the entry-point sewage pump in the Hippo range, in 400V three-phase for commercial and light-industrial installations with 3-phase distribution.…
The Evak Hippo 50-75 (110V) is the 0.75 HP mid-range sewage pump in the Hippo family, in the UK construction-market 110V CTE variant for use with…
The Evak Hippo 50-75 (230V) is the 0.75 HP mid-range sewage pump in the Hippo family, in 230V single-phase for standard domestic mains supply. 0.55 kW /…
The Evak Hippo 50-75 (400V) is the 0.75 HP mid-range sewage pump in the Hippo family, in 400V three-phase for commercial and light-industrial installations with 3-phase…
The Evak Hippo 50-100 (110V) is the top-of-range Hippo available in the UK construction-market 110V CTE variant for use with heavy-duty building-site transformers. 0.75 kW /…
The Evak Hippo 50-100 (230V) is the 1 HP top-of-single-phase-range sewage pump in the Hippo family, in 230V single-phase for standard domestic and commercial mains supply.…
The Evak Hippo 50-100 (400V) is the 1 HP top of the single-phase Hippo tier in 400V three-phase configuration, built for permanent commercial and light-industrial installations…
The Evak Hippo 50-150 (230V) is the first genuinely industrial pump in the Hippo range, in 230V single-phase for standard mains supply. 1.1 kW / 1.5 HP…
The Evak Hippo 50-150 (400V) is the first genuinely industrial pump in the Hippo range, in 400V three-phase for permanent commercial and industrial installations. 1.1 kW…
The Evak Hippo 50-200 (230V) is the flagship of the Hippo range, in 230V single-phase for standard mains supply. 1.5 kW / 2 HP single-phase motor, 2″…
The Evak Hippo 50-200 (400V) is the flagship of the Hippo range, in 400V three-phase for permanent industrial installations with 3-phase distribution. 1.5 kW / 2 HP…
The Evak Hippo 65-150 (230V) is the entry point to the Hippo DN65 range — the step up from the 2″ Hippo 50 series to…
The Evak Hippo 65-150 (400V) is the three-phase version of the entry-level Hippo DN65 — same hydraulics as the 230V pump, built for pump stations…
The Evak Hippo 65-200 (230V) is the largest single-phase pump in the Hippo DN65 range — 1.5 kW / 2 HP, recessed vortex impeller, 65 mm free passage…
The Evak Hippo 65-200 (400V) is the three-phase version of the 2 HP Hippo DN65 — same hydraulics as the 230V pump, built for pump stations…
The Evak Hippo 65-300 (400V) is where the Hippo DN65 range goes three-phase only. 2.2 kW / 3 HP motor, recessed vortex impeller, 65 mm free passage and…
The Evak Hippo 65-400 (400V) is the second-largest Hippo DN65 — 3 kW / 4 HP three-phase, recessed vortex impeller, 65 mm free passage and a DN65 flanged…
The Evak Hippo 65-550 (400V) is the flagship of the Hippo DN65 range — 4.1 kW / 5.5 HP three-phase, recessed vortex impeller, 65 mm free passage and…
The Evak Hippo 80-150 (230V) is the entry point to the Hippo DN80 range — a 3″ sewage pump with 76 mm free passage and a…
The Evak Hippo 80-150 (400V) is the three-phase version of the entry-level Hippo DN80 — same hydraulics as the 230V pump, built for pump stations…
The Evak Hippo 80-200 (230V) is the largest single-phase pump in the Hippo DN80 range — 1.5 kW / 2 HP, recessed vortex impeller, 76 mm free passage…
The Evak Hippo 80-200 (400V) is the three-phase version of the 2 HP Hippo DN80 — same hydraulics as the 230V pump, built for pump stations…
The Evak Hippo 80-300T is where the Hippo DN80 range goes three-phase only. 2.2 kW / 3 HP motor, recessed vortex impeller, 76 mm free passage and a…
The Evak Hippo 80-400T is the second-largest Hippo DN80 — 3 kW / 4 HP three-phase, recessed vortex impeller, 76 mm free passage and a DN80 flanged discharge…
The Evak Hippo 80-550T is the flagship of the Hippo DN80 range and the biggest pump in the Hippo family — 4.1 kW / 5.5 HP three-phase,…
Frequently Asked Questions
Quick answers to common questions about the Evak Hippo range. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.