LOGIN / REGISTER
Trade
Secure Payments
Free delivery on a wide range of products

Grundfos SQE Pumps

The Grundfos SQE is the variable-speed version of the Grundfos SQ 3" submersible borehole pump. It uses the same stainless steel pump ends as the SQ, driven by Grundfos' MSE3 permanent-magnet motor with electronics built in. On a 230V single-phase supply it gives you dry-running protection, soft start and voltage protection with no separate control box. It fits any borehole from 76 mm (3") upwards.

Pair an SQE with a Grundfos CU 301 control unit and it becomes a constant-pressure system. The pump speeds up and slows down to hold the pressure you set at the taps, however many are open, instead of cycling on and off against a pressure switch. The CU 301 talks to the pump over the existing power cable, so no extra wiring goes down the borehole.

76 mm
Min. borehole (3")
1–7 m³/h
Rated flow range
Constant
Pressure with CU 301
2 years
Warranty
230V single-phase Variable speed Dry-running protection Soft start Built-in non-return valve AISI 304 stainless steel

Choosing your SQE family

Family Rated flow Models at APS Outlet Typical use
SQE 1 ≈1 m³/h 1-35 to 1-155 Rp 1¼ Deep, low-yield boreholes
SQE 2 ≈2 m³/h 2-35 to 2-130 Rp 1¼ Single homes, deeper water levels
SQE 3 ≈3 m³/h 3-30 to 3-120 Rp 1¼ Most domestic private supplies
SQE 5 ≈5 m³/h 5-15 to 5-70 Rp 1½ Larger homes, irrigation
SQE 7 ≈7 m³/h 7-15 to 7-40 Rp 1½ High flow from shallow water levels
Constant pressure needs a CU 301. Without one, an SQE runs at fixed speed like a standard SQ. Add the CU 301 constant pressure package for variable-speed control, set from 2 to 5 bar. The low-head SQE 5-15 and SQE 7-15 close off at about 2 bar, so they aren't suited to constant pressure. SQ and SQE pumps use 3-core drop cable. If you don't need constant pressure, see the Grundfos SQ range.
Logo for Grundfos

Showing 31–34 of 34 products

    Logo for Grundfos
    Grundfos SQE Pumps
    Grundfos SQE 7-15 96510169

    The Grundfos SQE 7-15 (96510169) is a 3″ stainless steel variable-speed submersible pump for very high flow at low head. It suits shallow wells and…

    View Product
    Logo for Grundfos
    Grundfos SQE Pumps
    Grundfos SQE 7-30 96510170

    The Grundfos SQE 7-30 (96510170) is a 3″ stainless steel variable-speed submersible pump for high-flow irrigation, smallholdings, tank filling and large properties with shallow water…

    View Product
    Logo for Grundfos
    Grundfos SQE Pumps
    Grundfos SQE 7-40 96510171

    The Grundfos SQE 7-40 (96510171) is the highest-flow pump in the Grundfos SQE range at full house pressure. It is a 3″ stainless steel variable-speed…

    View Product
    96524504
    Logo for Grundfos
    Grundfos SQE Pumps
    Grundfos CU 301 Constant Pressure Package 96524504

    The Grundfos CU 301 Constant Pressure Package (96524504) turns any Grundfos SQE borehole pump into a constant-pressure water system. The CU 301 reads a pressure…

    View Product

Frequently Asked Questions

Quick answers to common questions about the Grundfos SQE Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What types of Grundfos pumps are available?

Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.

How do I identify the correct Grundfos pump model?

Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.

Can a Grundfos pump improve household water pressure?

A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.