Grundfos SQE Pumps
Grundfos SQE 7-15 96510169
- Established 1975
- Trusted by thousands of customers
The Grundfos SQE 7-15 (96510169) is a 3″ stainless steel variable-speed submersible pump for very high flow at low head. It suits shallow wells and boreholes, irrigation, tank filling and water transfer. It delivers 7 m³/h (117 litres/min) at 12 m head from a standard 230V single-phase supply. The 0.7 kW MSE3 permanent-magnet motor has built-in dry-running protection, soft start and voltage protection. It fits any borehole from 76 mm (3″) upwards.
| Flow (l/min) | 0 | 30 | 60 | 90 | 120 | 150 |
|---|---|---|---|---|---|---|
| Head (m) | 21 | 19 | 17 | 14 | 9 | 2 |
| Pressure (bar) | 2.0 | 1.9 | 1.7 | 1.3 | 0.9 | 0.2 |
Head is what the pump produces. Your pressure at the surface is that figure less the depth to the pumping water level and the pipe losses.
High flow, low head
Dry-run protection
Soft start
Rp 1½ outlet
2-year warranty
More about this product
Grundfos SQE 7-15 overview
The SQE 7-15 is the single-stage model in the Grundfos SQE 7 family, the highest-flow SQE range. It moves 7 m³/h at 12 m. It is the pump for jobs where the water is close to the surface and you need volume rather than pressure. Typical uses are shallow wells and boreholes, filling large storage tanks, garden, paddock and market-garden irrigation, pond and lake abstraction, and water transfer.
It uses the same pump end as the SQ 7-15, fitted with Grundfos’ MSE3 variable-speed motor. It runs at fixed speed like a standard SQ, switched by a float switch, pressure switch or timer. It closes off at 21 m (2.1 bar), barely above the CU 301‘s 2 bar minimum set point, so it isn’t suited to constant-pressure use.
Performance
These figures are at full speed. Head is the total lift the pump has to provide: the depth to the pumping water level, plus the height to the outlet, plus pipe losses, plus any pressure you need (about 10 m per bar).
| Flow (m³/h) | Flow (l/min) | Head (m) | Equivalent pressure |
|---|---|---|---|
| 0 | 0 | 21 | 2.1 bar (closed valve) |
| 3.5 | 58.3 | 17 | 1.7 bar |
| 4.0 | 66.7 | 16 | 1.6 bar |
| 5.0 | 83.3 | 14 | 1.4 bar |
| 7.0 | 116.7 | 12 | 1.2 bar (rated point) |
| 8.0 | 133.3 | 6 | 0.6 bar |
Key features
Technical specification
| Model / part number | Grundfos SQE 7-15 / 96510169 |
| Rated flow / head | 7 m³/h at 12 m |
| Max. head | 21 m |
| Stages | 1 |
| Motor | Grundfos MSE3 variable-speed permanent-magnet, 0.7 kW (P2) |
| Supply | 1 × 200–240V, 50 Hz |
| Power input (P1) / rated current | 1.02 kW / 5.2 A |
| Rated speed | 10,700 rpm |
| Controls | Float switch, pressure switch or timer (too low-head for CU 301 constant pressure) |
| Enclosure / insulation class | IP68 / F |
| Outlet | Rp 1½ female |
| Min. borehole diameter | 76 mm (3″) |
| Net weight | 4.7 kg |
| Max. liquid temperature | 35 °C |
| Max. sand content | 50 g/m³ |
| Materials | Stainless steel EN 1.4301 (AISI 304), polyamide impellers |
| Non-return valve | Built in |
| Motor lead | 1.5 m (3-core drop cable required) |
| Warranty | 2 years |
Installation notes
- Hang the pump below the lowest expected pumping water level. It must be fully submerged before you switch it on.
- Use 3-core submersible drop cable, because Grundfos SQ/SQE motors don’t take 4-core. Join it to the motor lead with a heat-shrink cable joint kit.
- Use at least 1½” pipework to match the Rp 1½ outlet. At 7 m³/h, smaller pipe adds friction losses that this low-head pump can’t afford.
- Don’t pair it with a CU 301 for constant pressure: it closes off at 21 m (2.1 bar), barely above the CU 301’s 2 bar minimum set point.
- At 7 m³/h it can draw a small or slow well down very quickly, so check the yield first. The dry-running protection will stop it if the well empties.
Grundfos SQE 7-15 FAQs
-
instructions PDFDownload
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
You may also need
Grundfos Constant pressure package, single-phaseCU 301 are designed for communication, monitoring and control of SQE submersible pumps in constant pressure applications.Single-phase
Grundfos Drop cable 3 x 2.5mm per metreGenuine Grundfos part: Drop cable 3 x 2.5mm per metre.3G 2,5Cable size
Grundfos CU 301 constant-pressure control box for SQE borehole pumpsControl box for SQE pumps that keeps a constant pressure at the taps. It communicates with…
Heat shrink cable joint, 3 x 1.5-2.5mmHeat shrink cable joint kit for Grundfos SQ and SQE borehole pumps, for 3-core cable from 1.5 to 2.5…
Frequently Asked Questions
Quick answers to common questions about the Grundfos SQE 7-15 96510169. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What types of Grundfos pumps are available?
Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.
How do I identify the correct Grundfos pump model?
Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.
Can a Grundfos pump improve household water pressure?
A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.



