Grundfos SQE Pumps
Grundfos SQE 7-30 96510170
- Established 1975
- Trusted by thousands of customers
The Grundfos SQE 7-30 (96510170) is a 3″ stainless steel variable-speed submersible pump for high-flow irrigation, smallholdings, tank filling and large properties with shallow water levels. It delivers 7 m³/h (117 litres/min) at 25 m head from a standard 230V single-phase supply. The 1.15 kW MSE3 permanent-magnet motor has built-in dry-running protection, soft start and voltage protection. Pair it with a Grundfos CU 301 and it holds a constant pressure where the water is shallow. It fits any borehole from 76 mm (3″) upwards.
| Flow (l/min) | 0 | 30 | 60 | 90 | 120 | 150 |
|---|---|---|---|---|---|---|
| Head (m) | 42 | 40 | 36 | 31 | 23 | 10 |
| Pressure (bar) | 4.1 | 3.9 | 3.6 | 3.0 | 2.2 | 1.0 |
Head is what the pump produces. Your pressure at the surface is that figure less the depth to the pumping water level and the pipe losses.
CU 301 compatible
Dry-run protection
Soft start
Rp 1½ outlet
2-year warranty
More about this product
Grundfos SQE 7-30 overview
The SQE 7-30 is the 2-stage model in the Grundfos SQE 7 family, the highest-flow SQE range. It delivers 7 m³/h at 25 m and up to 9 m³/h at lower heads. Use it where the water is fairly close to the surface and you need a lot of it. Typical jobs are high-flow irrigation, paddocks and market gardens, smallholdings, livestock, filling large storage tanks, and big properties with shallow boreholes.
It uses the same pump end as the SQ 7-30, fitted with Grundfos’ MSE3 variable-speed motor. On its own it runs at fixed speed like a standard SQ. With a CU 301 it holds a set pressure, communicating over the existing power cable. The CU 301’s lowest set point is 2 bar (20 m) and this pump closes off at 42 m, so constant pressure suits shallow water only.
Performance
These figures are at full speed. Head is the total lift the pump has to provide: the depth to the pumping water level, plus the height to the outlet, plus pipe losses, plus any pressure you need (about 10 m for each bar).
| Flow (m³/h) | Flow (l/min) | Head (m) | Equivalent pressure |
|---|---|---|---|
| 0 | 0 | 42 | 4.2 bar (closed valve) |
| 4.0 | 66.7 | 35 | 3.5 bar |
| 5.0 | 83.3 | 32 | 3.2 bar |
| 6.0 | 100.0 | 29 | 2.9 bar |
| 7.0 | 116.7 | 25 | 2.5 bar (rated point) |
| 8.0 | 133.3 | 18 | 1.8 bar |
| 9.0 | 150.0 | 10 | 1.0 bar |
Key features
Technical specification
| Model / part number | Grundfos SQE 7-30 / 96510170 |
| Rated flow / head | 7 m³/h at 25 m |
| Max. head | 42 m |
| Stages | 2 |
| Motor | Grundfos MSE3 variable-speed permanent-magnet, 1.15 kW (P2) |
| Supply | 1 × 200–240V, 50 Hz |
| Power input (P1) / rated current | 1.65 kW / 8.4 A |
| Rated speed | 10,700 rpm |
| Controls | Grundfos CU 300 / CU 301 (power-line communication) |
| Enclosure / insulation class | IP68 / F |
| Outlet | Rp 1½ female |
| Min. borehole diameter | 76 mm (3″) |
| Net weight | 5.2 kg |
| Max. liquid temperature | 35 °C |
| Max. sand content | 50 g/m³ |
| Materials | Stainless steel EN 1.4301 (AISI 304), polyamide impellers |
| Non-return valve | Built in |
| Motor lead | 1.5 m (3-core drop cable required) |
| Warranty | 2 years |
Installation notes
- Hang the pump below the lowest expected pumping water level. It must be fully submerged before you switch it on.
- Use 3-core submersible drop cable, because Grundfos SQ/SQE motors don’t take 4-core. Join it to the motor lead with a heat-shrink cable joint kit.
- At 8.4 A, cable size matters on longer runs. We can confirm the right cross-section for your setting depth and run.
- Use at least 1½” pipework to match the Rp 1½ outlet. At 7 m³/h, smaller pipe adds friction losses that eat into the available head.
- 7 m³/h is a very high draw for most boreholes, so check the yield from your drilling or test-pump records first. Dry-running protection will stop the pump if the water level falls to it.
Grundfos SQE 7-30 FAQs
-
instructions PDFDownload
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
You may also need
Grundfos Constant pressure package, single-phaseCU 301 are designed for communication, monitoring and control of SQE submersible pumps in constant pressure applications.Single-phase
Grundfos CU 301 constant-pressure control box for SQE borehole pumpsControl box for SQE pumps that keeps a constant pressure at the taps. It communicates with…
Grundfos Drop cable 3 x 2.5mm per metreGenuine Grundfos part: Drop cable 3 x 2.5mm per metre.3G 2,5Cable size
Heat shrink cable joint, 3 x 1.5-2.5mmHeat shrink cable joint kit for Grundfos SQ and SQE borehole pumps, for 3-core cable from 1.5 to 2.5…
Frequently Asked Questions
Quick answers to common questions about the Grundfos SQE 7-30 96510170. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What types of Grundfos pumps are available?
Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.
How do I identify the correct Grundfos pump model?
Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.
Can a Grundfos pump improve household water pressure?
A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.



