Accumulator Vessels Horizontal
GWS 100 litre accumulator Horizontal PressureWave PWB-100LH
- Established 1975
- Trusted by thousands of customers
The GWS PressureWave PWB-100LH is a 100 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand on top — the classic base for a surface or jet pump pressure set. It stores pressurised water so the pump starts less often and delivers steadier pressure.
FDA-compliant butyl diaphragm, virgin polypropylene liner and patented stainless steel 1″ BSPT water connection keep water off the steel shell. 10 bar max working pressure, factory pre-charged to 1.9 bar, rated -10 to 90 °C, maintenance free.
Butyl diaphragm
Stainless steel connection
Up to 90 °C
Potable water
Maintenance free
More about this product
What is the GWS PressureWave PWB-100LH?
The GWS PressureWave PWB-100LH is a 100 litre (26.4 US gal) horizontal diaphragm pressure tank — also known as a pressure vessel, accumulator or expansion vessel — made by Global Water Solutions (GWS). It is the UK BSP version of the PWN-100LH (NPT).
It lies on replaceable engineered thermoplastic feet with a reinforced pump stand on top, so a pump can be bolted directly to the vessel. A pre-charged air cushion behind the butyl diaphragm pushes stored water back into the system when a tap opens, cutting pump starts and smoothing pressure.
Key specifications
| Specification | Value |
|---|---|
| Brand / series | Global Water Solutions (GWS) PressureWave™ |
| Model (BSP) | PWB-100LH — NPT equivalent PWN-100LH |
| Type | Horizontal pre-charged diaphragm pressure vessel with feet and pump stand |
| Nominal volume | 100 litres (26.4 US gal) |
| Connection | 1″ BSPT, patented stainless steel |
| Max working pressure | 10 bar (150 psi) |
| Factory pre-charge | 1.9 bar (28 psi) |
| Operating temperature | -10 °C to 90 °C (avoid freezing) |
| Dimensions | 720 mm long × 475 mm high (data sheet dimension C: 245 mm) |
| Gross weight | 20.2 kg |
| Diaphragm / liner | FDA-compliant high-grade butyl diaphragm, virgin polypropylene liner |
| Shell / finish | Carbon steel, dual-layer polyurethane paint; thermoplastic feet and pump stand |
| Approx. drawdown* | 31 litres at 2.0/3.5 bar (1.8 bar pre-charge) |
| Approvals | CE marked, made under ISO 9001:2015. The GWS data sheet for the PressureWave range carries WRAS, ACS, KIWA and WaterMark approval marks; GWS note certification can vary by model, so ask us for the WRAS listing if your project needs it. |
Where it’s used
How it’s built
PressureWave horizontal range
| Model | Volume | Length × height | Weight | Approx. drawdown* |
|---|---|---|---|---|
| PWB-8LH | 8 L | 312 × 231 mm | 2.9 kg | 2.5 L |
| PWB-12LH | 12 L | 376 × 260 mm | 3.6 kg | 3.7 L |
| PWB-20LH | 20 L | 447 × 292 mm | 5.1 kg | 6.2 L |
| PWB-24LH | 24 L | 447 × 321 mm | 6.1 kg | 7.4 L |
| PWB-35LH | 35 L | 481 × 353 mm | 8.0 kg | 10.9 L |
| PWB-60LH | 60 L | 530 × 423 mm | 11.7 kg | 18.6 L |
| PWB-80LH | 80 L | 726 × 424 mm | 16.5 kg | 25 L |
| PWB-100LH | 100 L | 720 × 475 mm | 20.2 kg | 31 L |
*Drawdown is the water the vessel releases between pump cut-out and cut-in. Figures are calculated for a typical booster setting of 2.0 bar cut-in / 3.5 bar cut-out with the air pre-charge set at 1.8 bar. Higher pressure bands give less drawdown per litre of vessel.
Installation and pre-charge
- Check the pre-charge at the air valve with the vessel isolated and empty of water.
- On a pump system, set the pre-charge about 0.2 bar below the pump cut-in pressure (for example 1.8 bar for a 2.0 bar cut-in).
- Fit an isolating valve and drain point at the vessel so it can be checked without draining the system.
- Do not exceed 10 bar maximum working pressure, and protect from frost (minimum -10 °C, avoid freezing).
- Re-check the pre-charge at routine service visits — a wrong pre-charge is the most common cause of short-cycling pumps.
FAQs
-
data sheet PDFDownload
-
manual PDFDownload
-
Dimensions PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
You may also need
The WaterBoost WB-Compact 4.5 ACF1 is a compact floor-mounted variable speed pump designed to charge external accumulator vessels to up to 4.5 bar. If your…
Supplied as the Mainsboost Upstream Monobloc 22/28mm. This kit now ships as a single pre-assembled unit rather than a box of loose fittings — the…
The WaterBoost WB-Compact 4.5 ACW1 is a wall-mounted, variable-speed accumulator booster pump. Paired with an external accumulator or pressure vessel it delivers up to 4.5 bar…
Frequently Asked Questions
Quick answers to common questions about the GWS 100 litre accumulator Horizontal PressureWave PWB-100LH. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is an accumulator tank?
An accumulator tank is a pressurised vessel that connects directly to the mains supply and stores water under pressure. When a tap or shower opens, water discharges immediately from the vessel at full mains pressure rather than drawing only from the street main. This delivers stronger, more consistent flow at peak times. Accumulators have no pump and no moving parts so they are maintenance free and silent.
When should I use an accumulator instead of a pump?
An accumulator is the right solution when static mains pressure is adequate – above 2 bar – but flow is poor or drops during peak demand. It boosts available flow without adding a pump, energy use or noise. If static pressure is below 2 bar, a booster pump is needed instead, or an accumulator combined with a charge pump such as the WaterBoost ACF1.
What size accumulator do I need?
Accumulators are typically sized on a 60 per cent usable rule – a 300 litre vessel delivers around 180 litres of boosted water per cycle. As a guide, a 2 to 3 bedroom home suits a 300 litre vessel such as the GWS GCB-300LV. Larger 4 to 5 bedroom homes or properties with multiple bathrooms typically need 450 to 600 litres. Vertical models save floor space, horizontal models suit lofts and roof spaces.
What is a pressure vessel used for in a pumping system?
A pressure vessel stores water under pressure, helping maintain supply and reduce unnecessary pump starts.
What is the difference between an accumulator and an expansion vessel?
Accumulators provide pressurised water storage, while expansion vessels accommodate volume changes caused by temperature; product suitability depends on system design.
How do I choose a pressure vessel?
Consider intended use, capacity, maximum working pressure, pre-charge requirements, installation orientation and potable-water suitability.



