LOGIN / REGISTER
Trade
Secure Payments
Free delivery on a wide range of products

Accumulator Vessels Horizontal

GWS 24 litre accumulator Horizontal PressureWave

In stock

Our Price £63.60 Inc VAT £53.00 Ex VAT
Any questions? Message us on WhatsApp (opens in new tab)
  • Established 1975
  • Trusted by thousands of customers

The GWS PressureWave PWB-24LH is a 24 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand on top — the classic base for a surface or jet pump pressure set. It stores pressurised water so the pump starts less often and delivers steadier pressure.

FDA-compliant butyl diaphragm, virgin polypropylene liner and patented stainless steel 1″ BSPT water connection keep water off the steel shell. 10 bar max working pressure, factory pre-charged to 1.9 bar, rated -10 to 90 °C, maintenance free.

24 L
Nominal volume
10 bar
Max working pressure
1.9 bar
Factory pre-charge
1″ BSPT
Connection
Horizontal with pump stand
Butyl diaphragm
Stainless steel connection
Up to 90 °C
Potable water
Maintenance free
Check the air pre-charge with the vessel empty before commissioning and set it about 0.2 bar below pump cut-in.
More about this product

Frequently Asked Questions

Quick answers to common questions about the GWS 24 litre accumulator Horizontal PressureWave. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What is an accumulator tank?

An accumulator tank is a pressurised vessel that connects directly to the mains supply and stores water under pressure. When a tap or shower opens, water discharges immediately from the vessel at full mains pressure rather than drawing only from the street main. This delivers stronger, more consistent flow at peak times. Accumulators have no pump and no moving parts so they are maintenance free and silent.

When should I use an accumulator instead of a pump?

An accumulator is the right solution when static mains pressure is adequate – above 2 bar – but flow is poor or drops during peak demand. It boosts available flow without adding a pump, energy use or noise. If static pressure is below 2 bar, a booster pump is needed instead, or an accumulator combined with a charge pump such as the WaterBoost ACF1.

What size accumulator do I need?

Accumulators are typically sized on a 60 per cent usable rule – a 300 litre vessel delivers around 180 litres of boosted water per cycle. As a guide, a 2 to 3 bedroom home suits a 300 litre vessel such as the GWS GCB-300LV. Larger 4 to 5 bedroom homes or properties with multiple bathrooms typically need 450 to 600 litres. Vertical models save floor space, horizontal models suit lofts and roof spaces.

What is a pressure vessel used for in a pumping system?

A pressure vessel stores water under pressure, helping maintain supply and reduce unnecessary pump starts.

What is the difference between an accumulator and an expansion vessel?

Accumulators provide pressurised water storage, while expansion vessels accommodate volume changes caused by temperature; product suitability depends on system design.

How do I choose a pressure vessel?

Consider intended use, capacity, maximum working pressure, pre-charge requirements, installation orientation and potable-water suitability.