TT range
TT range
7 models in the TT range.
7 products
T-T305 sewage transfer pump, 230 V single-phaseCast iron submersible pump for transferring sewage and dirty water drainage. A shredding action from the impeller rotating against…
T-T305 sewage transfer pump, 400 V three-phaseCast iron submersible pump for transferring sewage and dirty water drainage. A shredding action from the impeller rotating against…
T-T505 sewage transfer pump, 230 V single-phaseCast iron submersible pump for transferring sewage and dirty water drainage. A shredding action from the impeller rotating against…
T-T505 sewage transfer pump, 400 V three-phaseCast iron submersible pump for transferring sewage and dirty water drainage. A shredding action from the impeller rotating against…
T-T510 sewage transfer pump, 400 V three-phaseCast iron submersible pump for transferring sewage and dirty water drainage. A shredding action from the impeller rotating against…
T-T DN80 auto-coupling (duckfoot) kitPump pedestal (duckfoot), pump hook and upper guide rail bracket. The pump slides down the guide rails and self-locates on the…
T-T stand for Zenit DGO 150/200 80 mm modelsPump stand so the pump sits and runs correctly in a chamber where an auto-coupling cannot be…
Frequently Asked Questions
Quick answers to common questions about the TT range. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.