Accumulator Vessels Horizontal
GWS PressureWave horizontal pressure vessels (PWB-LH series) are 8 to 100 litre pre-charged diaphragm tanks from Global Water Solutions with thermoplastic feet and a pump stand on top — the base for a surface or jet pump pressure set on wells, boreholes, tanks and booster duties.
FDA-compliant butyl diaphragm, virgin polypropylene liner and patented stainless steel 1" BSPT connection; 10 bar max working pressure and 1.9 bar factory pre-charge.
| Model | Volume | Length × height | Weight | Approx. drawdown* |
|---|---|---|---|---|
| PWB-8LH | 8 L | 312 × 231 mm | 2.9 kg | 2.5 L |
| PWB-12LH | 12 L | 376 × 260 mm | 3.6 kg | 3.7 L |
| PWB-20LH | 20 L | 447 × 292 mm | 5.1 kg | 6.2 L |
| PWB-24LH | 24 L | 447 × 321 mm | 6.1 kg | 7.4 L |
| PWB-35LH | 35 L | 481 × 353 mm | 8.0 kg | 10.9 L |
| PWB-60LH | 60 L | 530 × 423 mm | 11.7 kg | 18.6 L |
| PWB-80LH | 80 L | 726 × 424 mm | 16.5 kg | 25 L |
| PWB-100LH | 100 L | 720 × 475 mm | 20.2 kg | 31 L |
*Drawdown is the water the vessel releases between pump cut-out and cut-in. Figures are calculated for a typical booster setting of 2.0 bar cut-in / 3.5 bar cut-out with the air pre-charge set at 1.8 bar. Higher pressure bands give less drawdown per litre of vessel.
12 products
The GWS PressureWave PWB-8LH is a 8 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
The GWS PressureWave PWB-12LH is a 12 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
The GWS PressureWave PWB-20LH is a 20 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
The GWS PressureWave PWB-24LH is a 24 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
The GWS PressureWave PWB-35LH is a 35 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
The GWS PressureWave PWB-60LH is a 60 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
The GWS PressureWave PWB-80LH is a 80 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
The GWS PressureWave PWB-100LH is a 100 litre horizontal pre-charged diaphragm pressure vessel from Global Water Solutions, standing on thermoplastic feet with a pump stand…
Rebranding to WaterBoost Horizontal Accumulators – Solutions for Low Water Flow Applications Water pressure and flow can fluctuate, especially during peak usage times such as…
Rebranding to WaterBoost Horizontal Accumulators – Solutions for Low Water Flow Applications Water pressure and flow can fluctuate, especially during peak usage times such as…
Rebranding to WaterBoost Horizontal Accumulators – Solutions for Low Water Flow Applications Water pressure and flow can fluctuate, especially during peak usage times such as…
Rebranding to WaterBoost Horizontal Accumulators – Solutions for Low Water Flow Applications Water pressure and flow can fluctuate, especially during peak usage times such as…
Frequently Asked Questions
Quick answers to common questions about the Accumulator Vessels Horizontal. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is an accumulator tank?
An accumulator tank is a pressurised vessel that connects directly to the mains supply and stores water under pressure. When a tap or shower opens, water discharges immediately from the vessel at full mains pressure rather than drawing only from the street main. This delivers stronger, more consistent flow at peak times. Accumulators have no pump and no moving parts so they are maintenance free and silent.
When should I use an accumulator instead of a pump?
An accumulator is the right solution when static mains pressure is adequate – above 2 bar – but flow is poor or drops during peak demand. It boosts available flow without adding a pump, energy use or noise. If static pressure is below 2 bar, a booster pump is needed instead, or an accumulator combined with a charge pump such as the WaterBoost ACF1.
What size accumulator do I need?
Accumulators are typically sized on a 60 per cent usable rule – a 300 litre vessel delivers around 180 litres of boosted water per cycle. As a guide, a 2 to 3 bedroom home suits a 300 litre vessel such as the GWS GCB-300LV. Larger 4 to 5 bedroom homes or properties with multiple bathrooms typically need 450 to 600 litres. Vertical models save floor space, horizontal models suit lofts and roof spaces.
What is a pressure vessel used for in a pumping system?
A pressure vessel stores water under pressure, helping maintain supply and reduce unnecessary pump starts.
What is the difference between an accumulator and an expansion vessel?
Accumulators provide pressurised water storage, while expansion vessels accommodate volume changes caused by temperature; product suitability depends on system design.
How do I choose a pressure vessel?
Consider intended use, capacity, maximum working pressure, pre-charge requirements, installation orientation and potable-water suitability.