LOGIN / REGISTER
Trade
Secure Payments
Free delivery on a wide range of products

WaterBoost – Coffin

WaterBoost WB-Coffin 110 POP Variable Speed 2204210P

In stock

Our Price £751.20 Inc VAT £626.00 Ex VAT
Any questions? Message us on WhatsApp (opens in new tab)
  • Established 1975
  • Trusted by thousands of customers

The WaterBoost WB-Coffin 110 POP is the lowest-profile system in the WB-Coffin range — a 110-litre WRAS-approved loft coffin tank only 310mm tall, paired with the compact DAB Esybox Pop variable speed pump. It is built for spaces too low for the WB-Coffin 200, where a modest, reliable boost is all that’s needed.

Suitable for heat pump systems. Gives an unvented hot water cylinder the pressure and flow it needs where the mains supply falls short.

Delivering 24 litres per minute at 2.5 bar, with a maximum flow of 65 l/min and up to 3.2 bar, the WB-Coffin 110 POP suits a single shower, one bathroom or a small flat where flow demand is light. The tank connects directly to the mains via the supplied ½” float valve, and the Byelaw 30 kit, insulation and all interconnecting pipework are included as standard.

With a footprint of 1390mm (L) × 500mm (W) × 310mm (H), it fits lofts, eaves, under floors, under stairs and low cupboards — places where even a standard coffin tank won’t go.

24l/min
@ 2.5 bar
110L
Tank storage
310mm
Tank height
3yr
DAB warranty
WRAS tank & pumpH2D app310mm heightDirect mainsPipework included

Check it’s the right one before you buy

Five questions and the sizer picks the tank and pump for your house.

Size my system →

More about this product

You may also need

    Logo for WaterBoost
    WaterBoost Slimline – Fixed Speed
    WaterBoost WB-Fixed 300 Litre Slimline 2302510

    The WaterBoost WB-Fixed 300 Slimline is a complete, pre-assembled fixed-speed water boosting system designed as a cost-effective solution to low water pressure or restricted flow…

    View Product
    Logo for WaterBoost
    WaterBoost- Slimline EXT
    WaterBoost WB-EXT Slimline 300 Mini3 Variable Speed 2502210

    The WaterBoost WB-EXT Slimline 300 Mini3 is a variable-speed water boosting system combining a 300-litre WRAS-approved slimline tank (600mm dia × 1200mm high) with the…

    View Product
    Logo for WaterBoost
    WaterBoost- Slimline EXT
    WaterBoost WB-EXT Slimline 300 Esybox Variable Speed 2502110

    The WaterBoost WB-EXT Slimline 300 Esybox is a high-performance variable-speed boosting system for 3–4 bedroom homes combining a 300-litre WRAS-approved slimline tank (600mm dia ×…

    View Product

Frequently Asked Questions

Quick answers to common questions about the WaterBoost WB-Coffin 110 POP Variable Speed 2204210P. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What is a mains pressure boosting system?

A mains pressure boosting system increases the pressure and flow of water from the incoming mains supply into a property. It typically combines a pump and a storage or expansion tank, drawing water from the mains and delivering it to taps, showers and appliances at a stronger, more consistent pressure. They are used where the incoming mains is too weak to serve modern outlets reliably.

When do I need a mains booster pump?

You normally need a mains booster if static mains pressure is below 1.5 to 2 bar, if showers run weakly when other taps are open, or if combi boilers struggle to deliver hot water. Anglian Pumping recommends checking static pressure at the stop tap before specifying a system, then choosing a model rated for the number of bathrooms and outlets in the property.

What size mains booster do I need for my home?

Sizing depends on the number of bathrooms, the type of fittings and the static mains pressure. As a guide, a 1 to 2 bathroom property with combi boiler or single shower often needs 1.6 to 3 bar boost. A 2 to 3 bathroom property typically needs 3 to 4.5 bar with an integral break tank. Larger homes need a tank-and-pump system such as the DAB Esybox with Esytank or a Powertank set.

What is a water booster pump?

A water booster pump increases the pressure of an existing water supply to give stronger flow at taps, showers and appliances. It can be a small inline pump fitted to the incoming mains, or a larger pump and tank set that draws from a break tank to feed the whole house. Boosters do not create water – they raise the pressure of the water already coming in.

What is the difference between an inline booster and a tank-and-pump booster?

An inline booster connects straight onto the incoming mains and is limited to 12 litres per minute under UK water regulations – examples include the Salamander HomeBoost and WaterBoost WB-Compact. A tank-and-pump booster, such as the Grundfos Home Booster or DAB Esybox with Esytank, draws from a break tank and can deliver much higher flow rates for larger homes with multiple bathrooms.

What is a variable speed booster pump?

A variable speed booster uses an inverter to adjust pump speed in real time to match demand. It maintains constant pressure as outlets open and close, runs more quietly than a fixed-speed pump and typically saves up to 50 per cent of the energy a fixed-speed equivalent would use. The DAB Esybox, DAB Esybox Mini 3 and Grundfos Scala2 are common variable speed examples.

What does a water booster pump do?

A water booster pump raises water pressure to help supply taps, showers and other outlets when the existing system cannot meet demand.

Can a booster pump connect directly to the water mains?

Not every booster can. Direct connection depends on the product design and applicable water regulations; some systems require a break tank.

How do I size a water booster pump?

Assess simultaneous flow demand, required outlet pressure, available inlet conditions and the pressure losses in the pipework.