Grundfos SQ Pumps
Grundfos SQ 1-155 96510196
- Established 1975
- Trusted by thousands of customers
The Grundfos SQ 1-155 (96510196) is the highest-head pump in the Grundfos SQ range. It is a 3″ stainless steel submersible borehole pump for the deepest low-yield private water supplies. It delivers 1 m³/h (about 17 litres/min) at 151 m head from a standard 230V single-phase supply. The 1.85 kW MS3 permanent-magnet motor has built-in dry-running protection, soft start and voltage protection, and the pump fits any borehole from 76 mm (3″) upwards.
| Flow (l/min) | 0 | 5 | 10 | 15 | 20 | 25 |
|---|---|---|---|---|---|---|
| Head (m) | 237 | 231 | 216 | 191 | 158 | 117 |
| Pressure (bar) | 23.2 | 22.7 | 21.1 | 18.7 | 15.5 | 11.5 |
Head is what the pump produces. Your pressure at the surface is that figure less the depth to the pumping water level and the pipe losses.
Soft start
Built-in non-return valve
Rp 1¼ outlet
AISI 304 stainless
2-year warranty
More about this product
Grundfos SQ 1-155 overview
The SQ 1-155 is the 10-stage top model of the Grundfos SQ 1 family and the highest-head pump in the whole SQ range. It uses the largest 1.85 kW MS3 motor and gives up to 237 m of head. It is built for low-yield boreholes where the pumping water level sits more than 100 m down, or where deep water then has to climb a long way to reach a property, farm or header tank. Typical jobs are the deepest private water supplies in hard-rock and upland areas, remote homes, holiday lets and livestock supplies.
Like every SQ, it has the electronics inside the motor. There is no capacitor box or starter, and dry-running, overload, overtemperature and voltage protection are all built in. Wire it to a 230V supply through a pressure switch and pressure vessel, or use an automatic flow controller, and it’s ready to run.
Performance
Head is the total lift the pump must provide: depth to the pumping water level, plus height to the outlet, plus pipe losses, plus the pressure you want, at about 10 m per bar.
| Flow (m³/h) | Flow (l/min) | Head (m) | Equivalent pressure |
|---|---|---|---|
| 0 | 0 | 237 | 23.7 bar (closed valve) |
| 0.5 | 8.3 | 222 | 22.2 bar |
| 1.0 | 16.7 | 151 | 15.1 bar (rated point) |
| 1.5 | 25.0 | 117 | 11.7 bar |
Key features
Technical specification
| Model / part number | Grundfos SQ 1-155 / 96510196 |
| Rated flow / head | 1 m³/h at 151 m |
| Max. head | 237 m |
| Stages | 10 |
| Motor | Grundfos MS3 permanent-magnet, 1.85 kW (P2) |
| Supply | 1 × 200–240V, 50 Hz |
| Power input (P1) / rated current | 2.54 kW / 12.3 A |
| Speed | 10,700 rpm |
| Enclosure / insulation class | IP68 / F |
| Outlet | Rp 1¼ female |
| Min. borehole diameter | 76 mm (3″) |
| Overall length | 969 mm |
| Net weight | 6.7 kg |
| Max. liquid temperature | 35 °C |
| Max. sand content | 50 g/m³ |
| Materials | Stainless steel EN 1.4301 (AISI 304), polyamide impellers |
| Non-return valve | Built in |
| Motor lead | 1.5 m (3-core drop cable required) |
| Warranty | 2 years |
Installation notes
- Hang the pump below the lowest expected pumping water level. It must be fully submerged before it is switched on.
- Use 3-core submersible drop cable. Grundfos SQ/SQE motors do not take a 4-core cable. Join it to the motor lead with a heat-shrink cable joint kit.
- At 12.3 A over a cable run of 100 m or more, cable size matters. Undersized cable means voltage drop and nuisance cut-outs. Ask us and we’ll confirm the cross-section for your depth.
- Water must flow past the motor to cool it. In wide wells or tanks, fit a cooling sleeve.
- The column can hold up to 23.7 bar against a closed valve, so use rising main and fittings rated for it, plus a pressure relief valve or pressure-reducing valve ahead of the house system.
Grundfos SQ 1-155 FAQs
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
You may also need
Grundfos Drop cable 3 x 2.5mm per metreGenuine Grundfos part: Drop cable 3 x 2.5mm per metre.3G 2,5Cable size
Heat shrink cable joint, 3 x 1.5-2.5mmHeat shrink cable joint kit for Grundfos SQ and SQE borehole pumps, for 3-core cable from 1.5 to 2.5…
Frequently Asked Questions
Quick answers to common questions about the Grundfos SQ 1-155 96510196. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What types of Grundfos pumps are available?
Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.
How do I identify the correct Grundfos pump model?
Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.
Can a Grundfos pump improve household water pressure?
A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.
