Name: Grundfos SQE 1-65 96510142
Brand: Grundfos
SKU: 96510142
Price: 1146.59 GBP
Availability: InStock

In stock

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

The Grundfos SQE 1-65 (96510142) is a 3″ stainless steel variable-speed submersible borehole pump for low-yield private water supplies with deep water levels. It delivers 1 m³/h (about 17 litres/min) at 72 m head from a standard 230V single-phase supply. The 0.7 kW MSE3 permanent-magnet motor has built-in dry-running protection, soft start and voltage protection. Pair it with a Grundfos CU 301 and it holds a constant pressure at the taps. It fits any borehole from 76 mm (3″) upwards.

1 m³/h

Rated flow at 72 m

94 m

Max. head

0.7 kW

230V single-phase

76 mm

Min. borehole

Variable speed
CU 301 compatible
Dry-run protection
Soft start
Rp 1¼ outlet
2-year warranty

Constant pressure needs a CU 301. The pump comes with a 1.5 m motor lead. You’ll need 3-core drop cable and a cable joint kit to reach the surface. We can size and supply the cable and the CU 301 package for your borehole.

Full Description

More about this product

Full Description

Grundfos SQE 1-65 overview

The SQE 1-65 is the 4-stage model in the Grundfos SQE 1 family. It is the most powerful SQE 1 that still runs on the compact 0.7 kW motor. It suits low-yield boreholes where the pumping water level sits around 35–50 m down, or where the supply has to lift water a long way uphill to a house, farm building or header tank. Typical jobs are single properties on a private water supply, holiday lets, livestock troughs and remote sites with weak power supplies.

It uses the same pump end as the SQ 1-65 with Grundfos’ MSE3 variable-speed motor. Run on its own, it behaves like a standard SQ. Connect a CU 301 control unit and it becomes a constant-pressure system. The pump speeds up and slows down to hold the pressure you set. It talks to the CU 301 over the existing power cable, and faults show on the CU 301 display.

16.7 l/min

At 72 m head

94 m

Max. head (closed valve)

5.2 A

Rated current

4.9 kg

Net weight

Performance

Figures are at full speed. Head is the total lift the pump has to provide: depth to the pumping water level, plus height to the outlet, plus pipe losses, plus the pressure you want (about 10 m per bar).

Flow (m³/h)	Flow (l/min)	Head (m)	Equivalent pressure
0	0	94	9.4 bar (closed valve)
0.5	8.3	88	8.8 bar
1.0	16.7	72	7.2 bar (rated point)
1.5	25.0	44	4.4 bar

Worked example: a 40 m pumping water level, a 6 m rise to the plant room, about 4 m of pipe losses and a 2 bar (20 m) CU 301 set point add up to 70 m. The SQE 1-65 holds that pressure at up to about 1 m³/h. With a shallower water level, the SQE 1-50 may be enough. If it’s deeper, step up to the SQE 1-80.

Key features

Constant pressure with CU 301

Set the pressure on the CU 301 and the SQE varies its speed to hold it as taps open and close. You get steady showers, fewer starts and stops, and can use a smaller pressure vessel.

No extra cables

The SQE and CU 301 communicate over the pump’s own power cable, so no signal wire goes down the borehole. Faults and alarms show on the CU 301 display.

Dry-running protection

The motor monitors its own power draw. If the borehole runs dry it cuts out, then restarts automatically once the water has recovered, protecting both pump and borehole.

Soft start and voltage protection

A smooth ramp-up keeps start current low and reduces water hammer. Over- and under-voltage protection stops the motor below 150V or above 315V instead of letting it burn out.

Built for real boreholes

Floating impellers with tungsten carbide/ceramic bearings tolerate sand up to 50 g/m³. A spring-loaded non-return valve is built into the pump top.

Stainless steel construction

The pump sleeve and motor are EN 1.4301 (AISI 304) stainless steel with glass-reinforced polyamide hydraulics, built for a long life in clean groundwater (pH 5–9).

Technical specification

Model / part number	Grundfos SQE 1-65 / 96510142
Rated flow / head	1 m³/h at 72 m
Max. head	94 m
Stages	4
Motor	Grundfos MSE3 variable-speed permanent-magnet, 0.7 kW (P2)
Supply	1 × 200–240V, 50 Hz
Power input (P1) / rated current	1.02 kW / 5.2 A
Rated speed	10,700 rpm
Controls	Grundfos CU 300 / CU 301 (power-line communication)
Enclosure / insulation class	IP68 / F
Outlet	Rp 1¼ female
Min. borehole diameter	76 mm (3″)
Overall length	768 mm
Net weight	4.9 kg
Max. liquid temperature	35 °C
Max. sand content	50 g/m³
Materials	Stainless steel EN 1.4301 (AISI 304), polyamide impellers
Non-return valve	Built in
Motor lead	1.5 m (3-core drop cable required)
Warranty	2 years

Installation notes

Hang the pump below the lowest expected pumping water level. It must be fully submerged before it is switched on.
Use 3-core submersible drop cable, as Grundfos SQ/SQE motors don’t take 4-core. Join it to the motor lead with a heat-shrink cable joint kit.
Size the cable to the run length so voltage drop stays low. We can confirm the cross-section for your depth.
For constant pressure, fit the CU 301 with its pressure sensor and a small diaphragm pressure vessel on the surface pipework.
The column can reach 9.4 bar against a closed valve, so use rising main and fittings rated for that.

Don’t need constant pressure? The Grundfos SQ 1-65 (96510190) uses the same pump end with a fixed-speed MS3 motor and runs from a standard pressure switch and vessel.

Grundfos SQE 1-65 FAQs

How much water does the Grundfos SQE 1-65 pump?

At full speed, about 1 m³/h (16.7 litres/min) at 72 m of total head, rising to around 25 litres/min at 44 m. It stops delivering at 94 m.

What’s the difference between the SQE 1-65 and SQ 1-65?

They have the same pump end, performance and borehole fit. The SQE has the MSE3 variable-speed motor, so with a CU 301 it gives constant pressure. The SQ is fixed-speed and runs from a pressure switch.

Do I need a CU 301?

Only for constant pressure. Without one, the SQE runs at fixed speed like a standard SQ. With a CU 301, you set the pressure on the control unit and the pump adjusts its speed to hold it.

Will the SQE 1-65 fit my borehole?

Yes, if the borehole or liner is at least 76 mm (3″) internal diameter. It fits comfortably in standard 4″, 5″ and 6″ domestic boreholes.

What happens if my borehole runs dry?

The SQE senses the drop in power when there’s no water, stops itself, and restarts automatically once the water recovers. With a CU 301 fitted, the dry-running alarm also shows on its display.

What cable does it need?

3-core submersible drop cable (live, neutral, earth) from the 1.5 m motor lead to the surface, joined with a heat-shrink joint kit. The CU 301 talks to the pump over the same cable, so no extra wiring is needed.

Downloads

instructions PDF
Download
Data Sheet PDF
Download

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.

You may also need

Grundfos SQ / SQE Accessories

Constant pressure package 96524504

Accessories for Grundfos SQ and SQE pumps Constant pressure package including – CU301 control box, GT-H-8 8 litre vessel, 4-20mA pressure transducer, 0-10 pressure gauge,…

View Product