Pedrollo D Submersible Drainage Pumps
Pedrollo D 10 Three Phase Submersible Drainage Pump 2301100
- Established 1975
- Trusted by thousands of customers
The Pedrollo D 10 is a three-phase 400 V submersible drainage pump for clear or slightly dirty water, delivering up to 300 l/min and a maximum head of 16 m from a 0.75 kW (1 HP) motor.
This manual three-phase version comes without a float switch, with a 5 m power cable, handles suspended solids up to Ø 10 mm and drains down to 17 mm from the bottom. Cast iron pump body with a 1½″ delivery, AISI 304 stainless steel motor sleeve and suction filter.
More about this product
Product overview
The Pedrollo D 10 is a three-phase 400 V submersible drainage pump for clear or slightly dirty water. It covers 25 to 300 l/min with a working head of 15.5 m down to 3 m, and a maximum head of 16 m. Its 0.75 kW (1 HP) motor draws 2.0 A.
Pedrollo design the D series for domestic and civil drainage, including basement and garage flood mitigation, swimming pool and tank drainage, and non-sewage wastewater disposal, and it suits automated fixed installations.
The pump body is cast iron with cataphoresis treatment and a 1½″ ISO 228/1 threaded port. The suction filter, suction cover and motor sleeve are AISI 304 stainless steel, the motor shaft AISI 431 stainless steel and the open impeller technopolymer. The motor cover is AISI 304 stainless steel. A double shaft seal with an interposed oil chamber protects the motor, which has Class F insulation and IP X8 protection.
Key features
Typical applications
Technical specifications
| Brand / Series | Pedrollo — D |
| Model | D 10 |
| Pedrollo code | 2301100 |
| Supply | Three-phase 400 V, 50 Hz |
| Power (P2) | 0.75 kW / 1 HP |
| Current | 2.0 A at 400 V |
| Flow range | 25–300 l/min |
| Head range | 15.5–3 m |
| Maximum head | 16 m |
| Level control | None (manual version) |
| Delivery port | 1½″ ISO 228/1 |
| Solids passage | Up to Ø 10 mm |
| Bottom drainage level | 17 mm |
| Minimum immersion (continuous) | 210 mm |
| Maximum depth | 5 m below water level (with an appropriately sized power cable) |
| Liquid temperature | Up to +40 °C |
| Pump body | Cast iron with cataphoresis treatment |
| Suction filter and cover | AISI 304 stainless steel |
| Impeller | Open, technopolymer |
| Motor sleeve | AISI 304 stainless steel |
| Motor cover | AISI 304 stainless steel |
| Motor shaft | AISI 431 stainless steel |
| Shaft seal | Double shaft seal with interposed oil chamber: MG1-14D SIC, SiC/graphite/NBR motor side and SiC/SiC/NBR pump side, Ø 14 mm shaft |
| Motor | Three-phase; Class F insulation; IP X8 |
| Power cable | 5 m, type H07 RN-F |
| Height | 353 mm |
| Minimum sump | 500 × 500 mm, 500 mm deep |
| Weight | 12.9 kg |
| Available on request | 10 m power cable; different voltages and 60 Hz |
Installation
D range
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| Dm 8 | 2301050 | 230 V, float switch | 0.55 kW | 25–250 l/min | 12.5–3 m |
| Dm 10 | 2301060 | 230 V, float switch | 0.75 kW | 25–300 l/min | 15.5–3 m |
| Dm 20 | 2301070 | 230 V, float switch | 0.75 kW | 25–250 l/min | 19–8 m |
| Dm 30 | 2301080 | 230 V, float switch | 1.1 kW | 25–275 l/min | 25–9 m |
| D 8 | 2301090 | 400 V, manual | 0.55 kW | 25–250 l/min | 12.5–3 m |
| D 10 | 2301100 | 400 V, manual | 0.75 kW | 25–300 l/min | 15.5–3 m |
| D 20 | 2301110 | 400 V, manual | 0.75 kW | 25–250 l/min | 19–8 m |
| D 30 | 2301120 | 400 V, manual | 1.1 kW | 25–275 l/min | 25–9 m |
Head shown as the working range from 25 l/min to maximum flow. Performance to Pedrollo 50 Hz data.
Frequently asked questions
Does it have a float switch?
No. The three-phase D versions are manual, without a float switch.
What size solids can it pass?
Suspended solids up to Ø 10 mm.
How low does it drain?
Down to 17 mm from the bottom.
What flow and head does it give?
25 to 300 l/min, with 15.5 m head at 25 l/min and a maximum head of 16 m.
How long is the cable?
5 m as standard. A 10 m cable is available on request; EN 60335-2-41 requires 10 m for outdoor use.
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
Lowara DOC Pumps Submersible pumps for drainage, infiltration water and emptying of pools, ponds, tanks and reservoirs. The DOC pump is mainly made of stainless…
The Ebara Best One MA is a submersible electric pump for clean water with maximum solid sizes of 10mm in 304 stainless steel. Applications -…
The Clarke CSD3 multi-stage 4 impeller pump is for use with cold, clean water i.e. wells or rain water tanks and can pump up to…
The Hippo 2 offers high performance at a low price, ideal for home and garden use this great submersible water pump will pump with 3,2mm…
The Clarke PSD1A stainless steel pump designed to clear water from ponds and pools. Suitable for operating waterfalls, fountains, irrigating gardens and draining cellars. Includes a…
The DAB Feka submersible pump has been designed for lifting dirty water. Explore the Feka and Fekafos range here at APS for quality pumps at…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo D 10 Three Phase Submersible Drainage Pump 2301100. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.