Pedrollo D Submersible Drainage Pumps
The Pedrollo D series are submersible drainage pumps for clear or slightly dirty water: 8 models delivering up to 300 l/min and up to 26 m head, in single-phase 230 V versions with a float switch and three-phase 400 V manual versions.
Pedrollo design them for basement and garage flood mitigation, swimming pool and tank drainage and non-sewage wastewater disposal. They pass suspended solids up to Ø 10 mm, drain down to 17 mm, and have a cast iron body, AISI 304 stainless steel motor sleeve and a double shaft seal with oil chamber.
| Model | Code | Supply | Power | Flow | Max head |
|---|---|---|---|---|---|
| Dm 8 | 2301050 | 230 V, float switch | 0.55 kW | 25–250 l/min | 13 m |
| Dm 10 | 2301060 | 230 V, float switch | 0.75 kW | 25–300 l/min | 16 m |
| Dm 20 | 2301070 | 230 V, float switch | 0.75 kW | 25–250 l/min | 20 m |
| Dm 30 | 2301080 | 230 V, float switch | 1.1 kW | 25–275 l/min | 26 m |
| D 8 | 2301090 | 400 V, manual | 0.55 kW | 25–250 l/min | 13 m |
| D 10 | 2301100 | 400 V, manual | 0.75 kW | 25–300 l/min | 16 m |
| D 20 | 2301110 | 400 V, manual | 0.75 kW | 25–250 l/min | 20 m |
| D 30 | 2301120 | 400 V, manual | 1.1 kW | 25–275 l/min | 26 m |
Max head at zero flow. Performance to Pedrollo 50 Hz data.
8 products
The Pedrollo Dm 8 is a single-phase 230 V submersible drainage pump for clear or slightly dirty water, delivering up to 250 l/min and a…
The Pedrollo Dm 10 is a single-phase 230 V submersible drainage pump for clear or slightly dirty water, delivering up to 300 l/min and a…
The Pedrollo Dm 20 is a single-phase 230 V submersible drainage pump for clear or slightly dirty water, delivering up to 250 l/min and a…
The Pedrollo Dm 30 is a single-phase 230 V submersible drainage pump for clear or slightly dirty water, delivering up to 275 l/min and a…
The Pedrollo D 8 is a three-phase 400 V submersible drainage pump for clear or slightly dirty water, delivering up to 250 l/min and a…
The Pedrollo D 10 is a three-phase 400 V submersible drainage pump for clear or slightly dirty water, delivering up to 300 l/min and a…
The Pedrollo D 20 is a three-phase 400 V submersible drainage pump for clear or slightly dirty water, delivering up to 250 l/min and a…
The Pedrollo D 30 is a three-phase 400 V submersible drainage pump for clear or slightly dirty water, delivering up to 275 l/min and a…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo D Submersible Drainage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.