Pedrollo 6HR-HYD 6-Inch Borehole Pump Ends
Pedrollo 6HR 34/8 HYD 6-Inch Borehole Pump End 2204480
- Established 1975
- Trusted by thousands of customers
The Pedrollo 6HR 34/8 HYD is a 6″ submersible borehole pump end for a three-phase 11 kW (15 HP) motor, delivering up to 800 l/min and 106 m head.
Pump end only, with no motor. Micro-cast AISI 304 stainless steel impellers, diffusers, delivery port and motor bracket resist sand wear and corrosion, even in coastal installations and brackish water. Fit it to a three-phase 400 V 6″ motor of 11 kW (15 HP).
More about this product
Product overview
The Pedrollo 6HR 34/8 HYD is a 6″ submersible borehole pump end for clean or brackish water with up to 100 g/m³ of sand. It covers 100 to 800 l/min with a working head of 106 m down to 51 m, and needs a three-phase 400 V 6″ motor of 11 kW (15 HP). Pedrollo’s own 6″ motors are the 6PD rewindable oil-filled and 6PSR rewindable water-filled types.
Pedrollo build the 6HR in micro-cast stainless steel for exceptional mechanical resilience against sand wear and corrosion, making it suited to coastal installations and brackish water. It suits industrial, civil and agricultural use, including water distribution with pressure tanks, irrigation, pressure boosting and fire-fighting systems.
The delivery port, check valve, motor bracket (sized to NEMA standards), impellers, diffusers, pump shaft, tow coupling, filter and cable sheath are AISI 304 stainless steel. The pump bearings and wear rings use a special elastomer. The delivery port has a 3″ ISO 228/1 thread, and Pedrollo supply a counterflange kit on request.
Key features
Typical applications
Technical specifications
| Brand / Series | Pedrollo — 6HR-HYD |
| Model | 6HR 34/8 HYD (pump end) |
| Pedrollo code | 2204480 |
| Supplied as | Pump end only, no motor |
| Motor needed | 6″ motor, 11 kW / 15 HP (P2), three-phase 400 V |
| Flow range | 100–800 l/min |
| Head range | 106–51 m |
| Peak efficiency | η = 75% (6HR 34) |
| Delivery port | 3″ ISO 228/1, micro-cast AISI 304 stainless steel |
| Check valve | AISI 304 stainless steel |
| Motor bracket | AISI 304 micro-cast stainless steel, sized to NEMA standards |
| Impellers and diffusers | AISI 304 micro-cast stainless steel |
| Pump shaft | AISI 304 stainless steel |
| Pump bearings and wear rings | Special elastomer |
| Tow coupling, filter and cable sheath | AISI 304 stainless steel |
| Pump end length | 1,086 mm |
| Pump diameter | 152 mm |
| Well size | 6″ |
| Maximum sand content | 100 g/m³ |
| Liquid temperature | Up to +40 °C |
| Installation | Vertical or horizontal |
| Maximum depth | 200 m below water level with 6PD motors, 150 m with 6PSR motors |
| Minimum cooling flow | 8 cm/s |
| Starts per hour | 20, at regular intervals |
| Duty | Continuous running S1 |
| Efficiency index | MEI ≥ 0.40 |
| Liquid | Clean or brackish water |
| Available on request | Counterflange kit; double cable cover for 400/690 V star/delta dual voltage motors; different voltages and 60 Hz |
Installation
6HR 34 range
| Model | Code | Motor needed | Flow | Head | Delivery |
|---|---|---|---|---|---|
| 6HR 34/3 | 2204430 | 4 kW / 5.5 HP | 100–800 l/min | 40–19 m | 3″ |
| 6HR 34/4 | 2204440 | 5.5 kW / 7.5 HP | 100–800 l/min | 53–25.5 m | 3″ |
| 6HR 34/5 | 2204450 | 7.5 kW / 10 HP | 100–800 l/min | 66.5–32 m | 3″ |
| 6HR 34/6 | 2204460 | 9.2 kW / 12.5 HP | 100–800 l/min | 80–38 m | 3″ |
| 6HR 34/7 | 2204470 | 11 kW / 15 HP | 100–800 l/min | 93–45 m | 3″ |
| 6HR 34/8 | 2204480 | 11 kW / 15 HP | 100–800 l/min | 106–51 m | 3″ |
| 6HR 34/9 | 2204490 | 13 kW / 17.5 HP | 100–800 l/min | 120–58 m | 3″ |
| 6HR 34/11 | 2204500 | 15 kW / 20 HP | 100–800 l/min | 146–70 m | 3″ |
| 6HR 34/13 | 2204510 | 18.5 kW / 25 HP | 100–800 l/min | 173–83 m | 3″ |
| 6HR 34/16 | 2204520 | 22 kW / 30 HP | 100–800 l/min | 213–102 m | 3″ |
| 6HR 34/19 | 2204530 | 26 kW / 35 HP | 100–800 l/min | 253–122 m | 3″ |
| 6HR 34/22 | 2204540 | 30 kW / 40 HP | 100–800 l/min | 293–141 m | 3″ |
| 6HR 34/27 | 2204550 | 37 kW / 50 HP | 100–800 l/min | 359–173 m | 3″ |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data. Pump ends only, without motors.
Frequently asked questions
Does it come with a motor?
No. This is the pump end only. Fit it to a three-phase 6″ motor of 11 kW (15 HP); the AISI 304 motor bracket follows NEMA standards.
What size borehole does it need?
Pedrollo design the 6HR for 6″ wells. The pump measures 152 mm across.
Can it pump brackish water?
Yes. The micro-cast AISI 304 construction resists sand wear and corrosion, even in coastal installations and brackish water.
How much sand can it handle?
Up to 100 g/m³.
Can I install it horizontally?
Yes. Pedrollo allow horizontal installation on the 6HR 34 up to 11 stages, and this model has 8.
How deep can it go?
Up to 200 m below water level with a Pedrollo 6PD motor, or 150 m with a 6PSR motor.
Can it work with a 400/690 V star/delta motor?
Yes, on request. Pedrollo offer 6HR-HYD pumps with a double cable cover for 400/690 V star/delta dual voltage motors.
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
Submersible electric pumps with Grinder used for the lifitng of waters containing filamentous materials, paper or textile materials. In particular for clearance of waste waters…
Submersible pumps specifically designed for uses in narrow pits with dimensions down to 20 cm x 20 cm. Suitable to pump clear water containing particles…
ABS Robusta 200TS 230v auto/manual The Robusta 200 and 300 series have been designed for internal or external applications such as emptying containers and drainage…
The Clarke HSE pumps suitable for pump both dirty and clean water.
The Hippo 2 offers high performance at a low price, ideal for home and garden use this great submersible water pump will pump with 3,2mm…
Submersible sewage pump with a 40mm solids handling capacity. Cast iron construction suitable for pumping light domestic waste effluent septic tanks and large basements/cellars.
Frequently Asked Questions
Quick answers to common questions about the Pedrollo 6HR 34/8 HYD 6-Inch Borehole Pump End 2204480. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.