Pedrollo 6HR-HYD 6-Inch Borehole Pump Ends
The Pedrollo 6HR-HYD is a 6″ submersible borehole pump end in micro-cast AISI 304 stainless steel, supplied without a motor. 46 models across 4 hydraulic sizes deliver up to 1500 l/min and up to 359 m head, for three-phase 6″ motors from 4 to 37 kW. It suits industrial, civil and agricultural use, including pressure tanks, irrigation, pressure boosting and fire-fighting systems.
Micro-cast stainless steel gives exceptional resilience against sand wear and corrosion, suiting coastal installations and brackish water with up to 100 g/m³ of sand. AISI 304 delivery port, check valve, NEMA motor bracket, impellers, diffusers, shaft, filter and cable sheath. 3″ delivery, for 6″ wells.
| Hydraulic size | Models | Motor range | Flow | Head | Delivery |
|---|---|---|---|---|---|
| 6HR 34 | 13 | 4–37 kW | 100–800 l/min | up to 359 m | 3″ |
| 6HR 44 | 12 | 5.5–37 kW | 200–1000 l/min | up to 318 m | 3″ |
| 6HR 54 | 11 | 5.5–37 kW | 300–1200 l/min | up to 251 m | 3″ |
| 6HR 64 | 10 | 7.5–37 kW | 400–1500 l/min | up to 186 m | 3″ |
Maximum head at the minimum flow of each range. Performance to Pedrollo 50 Hz data. Pump ends only, without motors.
Showing 1–30 of 46 products
The Pedrollo 6HR 34/3 HYD is a 6″ submersible borehole pump end for a three-phase 4 kW (5.5 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/4 HYD is a 6″ submersible borehole pump end for a three-phase 5.5 kW (7.5 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/5 HYD is a 6″ submersible borehole pump end for a three-phase 7.5 kW (10 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/6 HYD is a 6″ submersible borehole pump end for a three-phase 9.2 kW (12.5 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/7 HYD is a 6″ submersible borehole pump end for a three-phase 11 kW (15 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/8 HYD is a 6″ submersible borehole pump end for a three-phase 11 kW (15 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/9 HYD is a 6″ submersible borehole pump end for a three-phase 13 kW (17.5 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/11 HYD is a 6″ submersible borehole pump end for a three-phase 15 kW (20 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/13 HYD is a 6″ submersible borehole pump end for a three-phase 18.5 kW (25 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/16 HYD is a 6″ submersible borehole pump end for a three-phase 22 kW (30 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/19 HYD is a 6″ submersible borehole pump end for a three-phase 26 kW (35 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/22 HYD is a 6″ submersible borehole pump end for a three-phase 30 kW (40 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 34/27 HYD is a 6″ submersible borehole pump end for a three-phase 37 kW (50 HP) motor, delivering up to 800 l/min…
The Pedrollo 6HR 44/3 HYD is a 6″ submersible borehole pump end for a three-phase 5.5 kW (7.5 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/4 HYD is a 6″ submersible borehole pump end for a three-phase 7.5 kW (10 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/5 HYD is a 6″ submersible borehole pump end for a three-phase 7.5 kW (10 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/6 HYD is a 6″ submersible borehole pump end for a three-phase 9.2 kW (12.5 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/7 HYD is a 6″ submersible borehole pump end for a three-phase 11 kW (15 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/9 HYD is a 6″ submersible borehole pump end for a three-phase 13 kW (17.5 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/10 HYD is a 6″ submersible borehole pump end for a three-phase 15 kW (20 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/12 HYD is a 6″ submersible borehole pump end for a three-phase 18.5 kW (25 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/15 HYD is a 6″ submersible borehole pump end for a three-phase 22 kW (30 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/18 HYD is a 6″ submersible borehole pump end for a three-phase 26 kW (35 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/20 HYD is a 6″ submersible borehole pump end for a three-phase 30 kW (40 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 44/25 HYD is a 6″ submersible borehole pump end for a three-phase 37 kW (50 HP) motor, delivering up to 1000 l/min…
The Pedrollo 6HR 54/3 HYD is a 6″ submersible borehole pump end for a three-phase 5.5 kW (7.5 HP) motor, delivering up to 1200 l/min…
The Pedrollo 6HR 54/4 HYD is a 6″ submersible borehole pump end for a three-phase 7.5 kW (10 HP) motor, delivering up to 1200 l/min…
The Pedrollo 6HR 54/5 HYD is a 6″ submersible borehole pump end for a three-phase 9.2 kW (12.5 HP) motor, delivering up to 1200 l/min…
The Pedrollo 6HR 54/6 HYD is a 6″ submersible borehole pump end for a three-phase 11 kW (15 HP) motor, delivering up to 1200 l/min…
The Pedrollo 6HR 54/8 HYD is a 6″ submersible borehole pump end for a three-phase 13 kW (17.5 HP) motor, delivering up to 1200 l/min…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo 6HR-HYD 6-Inch Borehole Pump Ends. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.