Ebara 1 GPE Variable Speed Booster Set
Ebara 1 GPE Matrix 10-5T/2.2 ESPM – 230v – 2002470108
- Established 1975
- Trusted by thousands of customers
The Ebara 1GPE MATRIX 10-5T/2.2 ESPM is a compact single-pump variable speed booster set. A five-stage Matrix 10 horizontal multistage pump in AISI 304 stainless steel, with a 2.2 kW IE3 motor, carries a motor-mounted E-SPD+ inverter, pressure transmitter, five-way check valve, membrane vessel and pressure gauge, so it arrives ready to connect.
The drive holds a constant set pressure as demand changes, from 3.6 m³/h up to 15 m³/h. It runs from a 230 V single-phase supply and connects through a G1½ suction and a G1¼ discharge.
E-SPD+ inverter
AISI 304 stainless
G1½ / G1¼ connections
IP55
23.3 kg
More about this product
Ebara 1GPE MATRIX 10-5T/2.2 ESPM Overview
The 1GPE MATRIX 10-5T/2.2 ESPM is the five-stage, 2.2 kW model in Ebara’s one-pump Matrix 10 GPE booster range. It is a single five-stage Matrix 10 horizontal multistage pump with its 2.2 kW IE3 motor, a motor-mounted E-SPD+ inverter and pressure transmitter, and a five-way check valve on the discharge that carries the membrane vessel and pressure gauge. Everything is built onto the pump, so it installs much like a single pump.
The E-SPD+ changes pump speed to hold a constant set pressure, speeding up as taps open and slowing as demand falls. That gives steadier pressure, lower energy use and less wear than a fixed-speed pump with a pressure switch. The set delivers from 3.6 m³/h up to 15 m³/h, with around 60.1 m of head at shut-off. It suits houses, flats, small commercial buildings and irrigation where demand varies through the day and only a single-phase supply is available.
Key Features
What’s in the Set
| Part | Qty |
|---|---|
| Matrix 10-5T electropump (pump and 2.2 kW motor) | 1 |
| E-SPD+ inverter | 1 |
| E-SPD+ adaptor | 1 |
| Pressure transmitter | 1 |
| Five-way check valve (AISI 304) | 1 |
| Membrane vessel | 1 |
| Pressure gauge | 1 |
Technical Specifications
| Specification | Value |
|---|---|
| Ebara part number | 2002470108 |
| Booster set | 1GPE MATRIX 10-5T/2.2 ESPM |
| Pump | 1 × Matrix 10-5T horizontal multistage, 5 stages, 2-pole |
| Flow range | 3.6–15 m³/h |
| Head at minimum / maximum flow | 55.5 m / 14.3 m |
| Shut-off head | 588.77 kPa (approx. 60.1 m, 5.9 bar) |
| Maximum working pressure | 1000 kPa (10 bar) |
| Impeller diameter | 101 mm |
| Suction / discharge | G1½ F / G1¼ F, threaded, PN10 |
| Motor | 2.2 kW, IE3, TEFC, 2-pole, 2850 rpm |
| Motor current | 8.2 A at 230 V (three-phase output from the E-SPD+) |
| Protection / insulation | IP55 / Class F |
| Supply | 230 V single phase, 50 Hz (E-SPD+ ESPM) |
| Inverter | E-SPD+ MT: 230 V single phase in, 230 V three phase out, up to 20 A input, IP55 |
| Liquid temperature | 0 to 80 °C, clean water free of solids |
| Ambient temperature | 0 to 40 °C, up to 1000 m above sea level |
| Overall size (L × W × H) | 487 × 249 × 469 mm |
| Weight | 23.3 kg |
| Packed size / weight | 320 × 550 × 370 mm, 25.3 kg |
Performance
Duty points at 50 Hz (full speed), from the Ebara 1GPE MATRIX 10-5T/2.2 ESPM curve (ISO 9906:2012 Grade 3B). The 0, 3.6 and 15 m³/h figures are Ebara’s stated values; the others are read from the curve. The drive reduces speed to hold the set pressure at lower demand.
| Flow (m³/h) | 0 | 3.6 | 5 | 7.5 | 10 | 12.5 | 15 |
|---|---|---|---|---|---|---|---|
| Head (m) | 60.1 | 55.5 | 53.5 | 48.5 | 40.8 | 29.5 | 14.3 |
Materials
| Component | Material |
|---|---|
| Impellers, pump casing, external pump casing | AISI 304 |
| Shaft | AISI 304 |
| Mechanical seal | Carbon rotary / ceramic stationary faces, EPDM gasket and bellows, EN 1.4402 (AISI 316) spring, frame and retainer |
| O-rings | EPDM |
| Five-way check valve | AISI 304 / silicone |
| Pressure gauge | Copper alloy / plastic |
| Motor casing and pump bracket | Aluminium |
Installation Notes
Frequently Asked Questions
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
DAB Self-priming centrifugal water pump with excellent suction capacity even when there are air bubbles. Particularly suitable for water supply in domestic installations smallscale agriculture…
A new range of compact electronic devices pressure/flow switches for control and protection of electric pumps.
The Clarke CBM pump. This high efficency multi-stage tankless booster pump has an electronic control unit and combines high output with a massive 48m head.…
DAB 2 Euroinox AD Twin Pump Booster Set is equipped with Active Driver are designed and manufactured to meet the constant pressure requirements imposed by modern water…
Lowara Resiboost Series of Variable Speed Electric Pumps and Pressure Booster Units. The single-phase Resiboost Watercooled variable speed electric pumps are designed for residential applications as they…
The Clarke SPE pumps. This robust pump is ideal for many applications around the home and garden.
Frequently Asked Questions
Quick answers to common questions about the Ebara 1 GPE Matrix 10-5T/2.2 ESPM – 230v – 2002470108. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a water booster pump?
A water booster pump increases the pressure of an existing water supply to give stronger flow at taps, showers and appliances. It can be a small inline pump fitted to the incoming mains, or a larger pump and tank set that draws from a break tank to feed the whole house. Boosters do not create water – they raise the pressure of the water already coming in.
What is the difference between an inline booster and a tank-and-pump booster?
An inline booster connects straight onto the incoming mains and is limited to 12 litres per minute under UK water regulations – examples include the Salamander HomeBoost and WaterBoost WB-Compact. A tank-and-pump booster, such as the Grundfos Home Booster or DAB Esybox with Esytank, draws from a break tank and can deliver much higher flow rates for larger homes with multiple bathrooms.
What is a variable speed booster pump?
A variable speed booster uses an inverter to adjust pump speed in real time to match demand. It maintains constant pressure as outlets open and close, runs more quietly than a fixed-speed pump and typically saves up to 50 per cent of the energy a fixed-speed equivalent would use. The DAB Esybox, DAB Esybox Mini 3 and Grundfos Scala2 are common variable speed examples.