GWS Pressure Wave
GWS 2 litre accumulator PWB-2LX
- Established 1975
- Trusted by thousands of customers
The GWS PressureWave PWB-2LX is a 2 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″ BSPT male connection — no feet or bracket needed — to stop pumps short-cycling, absorb thermal expansion and damp water hammer on cold and hot water systems up to 90 °C.
Built with an FDA-compliant butyl diaphragm, virgin polypropylene liner and patented stainless steel water connection, so water never contacts the steel shell. 10 bar max working pressure, factory pre-charged to 1.9 bar, maintenance free.
Butyl diaphragm
Stainless steel connection
Up to 90 °C
Potable water
Maintenance free
More about this product
What is the GWS PressureWave PWB-2LX?
The GWS PressureWave PWB-2LX is a 2 litre (0.5 US gal) inline diaphragm pressure tank, also called an expansion vessel or accumulator. It is made by Global Water Solutions (GWS) and is the UK BSP version of the PWN-2LX (NPT). The vessel hangs directly off the pipework on its 1″ BSPT connection, with a reinforced connection plate on 8 litre models and above.
Inside, a pre-charged air cushion sits behind a butyl diaphragm. As the system pressurises, water fills the diaphragm and compresses the air; when a tap opens, the air pushes that water back out. The result: fewer pump starts, absorbed expansion and smoother pressure.
Key specifications
| Specification | Value |
|---|---|
| Brand / series | Global Water Solutions (GWS) PressureWave™ |
| Model (BSP) | PWB-2LX — NPT equivalent PWN-2LX |
| Type | Inline (pipe-mounted) pre-charged diaphragm pressure vessel |
| Nominal volume | 2 litres (0.5 US gal) |
| Connection | 1″ BSPT male, patented stainless steel |
| Max working pressure | 10 bar (150 psi) |
| Factory pre-charge | 1.9 bar (28 psi) |
| Operating temperature | -10 °C to 90 °C (avoid freezing) |
| Dimensions | 208 mm high × 126 mm diameter |
| Gross weight | 13.8 kg per box of 12 (approx. 1.2 kg each) |
| Diaphragm / liner | FDA-compliant high-grade butyl diaphragm, virgin polypropylene liner |
| Shell / finish | Carbon steel, dual-layer polyurethane paint |
| Approx. drawdown* | 0.6 litres at 2.0/3.5 bar (1.8 bar pre-charge) |
| Approvals | CE marked, made under ISO 9001:2015. The GWS data sheet for the PressureWave range carries WRAS, ACS, KIWA and WaterMark approval marks; GWS note certification can vary by model, so ask us for the WRAS listing if your project needs it. |
Where it’s used
How it’s built
PressureWave inline range
| Model | Volume | Height × diameter | Approx. drawdown* |
|---|---|---|---|
| PWB-2LX | 2 L | 208 × 126 mm | 0.6 L |
| PWB-3LX | 3 L | 243 × 143 mm | 0.9 L |
| PWB-4LX | 4 L | 261 × 162 mm | 1.2 L |
| PWB-8LX | 8 L | 314 × 202 mm | 2.5 L |
| PWB-12LX | 12 L | 367 × 230 mm | 3.7 L |
| PWB-18LX | 18 L | 367 × 279 mm | 5.6 L |
| PWB-24LX | 24 L | 447 × 290 mm | 7.4 L |
| PWB-35LX | 35 L | 483 × 318 mm | 10.9 L |
*Drawdown is the water the vessel releases between pump cut-out and cut-in. Figures are calculated for a typical booster setting of 2.0 bar cut-in / 3.5 bar cut-out with the air pre-charge set at 1.8 bar. Higher pressure bands give less drawdown per litre of vessel.
Need a wall fixing? The universal vertical mounting bracket for GWS tanks 2–80 litre supports the vessel independently of the pipework.
Installation and pre-charge
- Check the pre-charge at the air valve with the vessel isolated and empty of water.
- On a pump system, set the pre-charge about 0.2 bar below the pump cut-in pressure (for example 1.8 bar for a 2.0 bar cut-in).
- Fit an isolating valve and drain point at the vessel so it can be checked without draining the system.
- Do not exceed 10 bar maximum working pressure, and protect from frost (minimum -10 °C, avoid freezing).
- Re-check the pre-charge at routine service visits — a wrong pre-charge is the most common cause of short-cycling pumps.
FAQs
-
manual PDFDownload
-
data sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Frequently Asked Questions
Quick answers to common questions about the GWS 2 litre accumulator PWB-2LX. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is an accumulator tank?
An accumulator tank is a pressurised vessel that connects directly to the mains supply and stores water under pressure. When a tap or shower opens, water discharges immediately from the vessel at full mains pressure rather than drawing only from the street main. This delivers stronger, more consistent flow at peak times. Accumulators have no pump and no moving parts so they are maintenance free and silent.
When should I use an accumulator instead of a pump?
An accumulator is the right solution when static mains pressure is adequate – above 2 bar – but flow is poor or drops during peak demand. It boosts available flow without adding a pump, energy use or noise. If static pressure is below 2 bar, a booster pump is needed instead, or an accumulator combined with a charge pump such as the WaterBoost ACF1.
What size accumulator do I need?
Accumulators are typically sized on a 60 per cent usable rule – a 300 litre vessel delivers around 180 litres of boosted water per cycle. As a guide, a 2 to 3 bedroom home suits a 300 litre vessel such as the GWS GCB-300LV. Larger 4 to 5 bedroom homes or properties with multiple bathrooms typically need 450 to 600 litres. Vertical models save floor space, horizontal models suit lofts and roof spaces.
What is a pressure vessel used for in a pumping system?
A pressure vessel stores water under pressure, helping maintain supply and reduce unnecessary pump starts.
What is the difference between an accumulator and an expansion vessel?
Accumulators provide pressurised water storage, while expansion vessels accommodate volume changes caused by temperature; product suitability depends on system design.
How do I choose a pressure vessel?
Consider intended use, capacity, maximum working pressure, pre-charge requirements, installation orientation and potable-water suitability.



