LOGIN / REGISTER
Trade
Secure Payments
Free delivery on a wide range of products

GWS Pressure Wave

GWS PressureWave inline pressure vessels (PWB-LX series) are compact pre-charged diaphragm tanks from Global Water Solutions, 2 to 35 litres, that screw straight onto pipework by a 1" BSPT male connection. They stop pumps short-cycling, take up thermal expansion and damp water hammer on systems up to 90 °C.

Every size has an FDA-compliant butyl diaphragm, virgin polypropylene liner and patented stainless steel water connection, 10 bar max working pressure and a 1.9 bar factory pre-charge.

2–35 L
Range
10 bar
Max working pressure
1.9 bar
Factory pre-charge
1" BSPT
Connection
Inline / pipe-mounted Booster pumps Expansion Water hammer Potable water Maintenance free
ModelVolumeHeight × diameterApprox. drawdown*
PWB-2LX2 L208 × 126 mm0.6 L
PWB-3LX3 L243 × 143 mm0.9 L
PWB-4LX4 L261 × 162 mm1.2 L
PWB-8LX8 L314 × 202 mm2.5 L
PWB-12LX12 L367 × 230 mm3.7 L
PWB-18LX18 L367 × 279 mm5.6 L
PWB-24LX24 L447 × 290 mm7.4 L
PWB-35LX35 L483 × 318 mm10.9 L

*Drawdown is the water the vessel releases between pump cut-out and cut-in. Figures are calculated for a typical booster setting of 2.0 bar cut-in / 3.5 bar cut-out with the air pre-charge set at 1.8 bar. Higher pressure bands give less drawdown per litre of vessel.

Set the air pre-charge about 0.2 bar below pump cut-in, with the vessel empty, before commissioning.
Logo for GWS

8 products

    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 2 litre accumulator PWB-2LX

    The GWS PressureWave PWB-2LX is a 2 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product
    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 3 litre accumulator PWB-3LX

    The GWS PressureWave PWB-3LX is a 3 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product
    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 4 litre accumulator PWB-4LX

    The GWS PressureWave PWB-4LX is a 4 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product
    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 8 litre accumulator PWB-8LX

    The GWS PressureWave PWB-8LX is a 8 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product
    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 12 litre accumulator PWB-12LX

    The GWS PressureWave PWB-12LX is a 12 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product
    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 18 litre accumulator PWB-18LX

    The GWS PressureWave PWB-18LX is a 18 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product
    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 24 litre accumulator PWB-24LX

    The GWS PressureWave PWB-24LX is a 24 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product
    PWB-24LX
    Logo for GWS
    GWS Pressure Wave
    GWS 35 litre accumulator PWB-35LX

    The GWS PressureWave PWB-35LX is a 35 litre inline pre-charged diaphragm pressure vessel from Global Water Solutions. It screws straight onto pipework by its 1″…

    View Product

Frequently Asked Questions

Quick answers to common questions about the GWS Pressure Wave. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What is an accumulator tank?

An accumulator tank is a pressurised vessel that connects directly to the mains supply and stores water under pressure. When a tap or shower opens, water discharges immediately from the vessel at full mains pressure rather than drawing only from the street main. This delivers stronger, more consistent flow at peak times. Accumulators have no pump and no moving parts so they are maintenance free and silent.

When should I use an accumulator instead of a pump?

An accumulator is the right solution when static mains pressure is adequate – above 2 bar – but flow is poor or drops during peak demand. It boosts available flow without adding a pump, energy use or noise. If static pressure is below 2 bar, a booster pump is needed instead, or an accumulator combined with a charge pump such as the WaterBoost ACF1.

What size accumulator do I need?

Accumulators are typically sized on a 60 per cent usable rule – a 300 litre vessel delivers around 180 litres of boosted water per cycle. As a guide, a 2 to 3 bedroom home suits a 300 litre vessel such as the GWS GCB-300LV. Larger 4 to 5 bedroom homes or properties with multiple bathrooms typically need 450 to 600 litres. Vertical models save floor space, horizontal models suit lofts and roof spaces.

What is a pressure vessel used for in a pumping system?

A pressure vessel stores water under pressure, helping maintain supply and reduce unnecessary pump starts.

What is the difference between an accumulator and an expansion vessel?

Accumulators provide pressurised water storage, while expansion vessels accommodate volume changes caused by temperature; product suitability depends on system design.

How do I choose a pressure vessel?

Consider intended use, capacity, maximum working pressure, pre-charge requirements, installation orientation and potable-water suitability.