Accumulator Vessels
150 litre accumulator vertical GWS PWB-150LV
In stock
- Established 1975
- Trusted by thousands of customers
Accumulators – Low Water Flow Applications
Water pressure and flow is not constant and demand during busy morning and evening periods may reduce water pressure in the mains network. Accumulators help solve this issue by holding water volumes under static/resting pressure.
No matter what the pressure is in the mains network, the plumbing of the water pipes from the road to inside your home may substantially reduce that pressure and flow by the time it gets to your taps.
Imagine a tennis ball leaving the racket, The further the ball travels, the slower and less power it has. The air resistance is slowing the ball. The ball is the water and the air your water pipes so you can see the longer the run, the less power. With an accumulator we store all the power at point of use i.e. the ball power just after if leaves the racket head. The significant increase is easy to understand.
Properties that have a shared supply are more likely to experience low water pressure and flows especially in peak times.
If your mains pressure isn’t above 2 bar static/resting we also recommend a pressure boosting pump to bring this up to 3 to 4 bar.
DAB ACF1 booster Pump –Â
Order today and experience a powerful taps again.
Upstream Kits – Â
More about this product
Maintenance free and WRAS approved.
- Diaphragm design
- Patened stainless steel water connection
- Virgin polypropylene liner
- Condensation reducing design
- Two-part polyurethane, epoxy primed paint finish
- Max working pressure 10 bar
- Factory pre-charge 1.4 bar
- Max temp 90 degree C
Uses –
- 1 to 2 bedroom house – 60 litre,100 litre or 200 litre
- 2 to 3 bedroom thouse – 200 litre, 250 litre or 300 litre
- 3 bedrooms and above – 300 litre or 450 litre
Remember GWS accumulators operate on a 60% volume to use ratio meaning a 300 litre vessel gives 180 litres of powerful water before returning to mains flow.
To find your vessel usage times vessel size by 0.6.
An average shower/bath runs at 10-12 litres/min. So 300 litre GWS x 0.6 = 180 litres. This will operate 2 showers at 12 litres/min for 180 / (12 litres/min x 2 ) = 7.5 minutes.
-
data sheet PDFDownload
-
manual PDFDownload
-
Dimensions PDFDownload
Standard delivery:
Standard delivery is free for all orders except for some low cost/low margin items where standard delivery is £6.50. Some difficult to transport goods also have a varying carriage charge applied.
Please contact us for the estimated standard delivery times of the products that we have in stock, either by calling 01473 719950, or by dropping us an email at info@anglianpumping.com.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
You may also need
Digital 4.5bar Accumulator Booster Pump (floor mounted) The Digital charger pump can be used with any accumulator or pressure vessel inc GWS, Lowara, Grundfos and…
APS 22mm upstream kit Comprising – 2 – pressure gauges 1 – Lever isolating ball valve 1 – pressure vessel fitting 1 – 6 bar…