Grundfos CRE 400V with sensor
Grundfos CRE 64-1-1 N F A E HQQE DN100 7.5kW 400V – 99072061
In stock
- Established 1975
- Trusted by thousands of customers
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges.
More about this product
The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor.
The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2.
The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously
variable control of the motor speed, which again enables adaptation of the performance to a given requirement.
An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
- "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights)
- "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights)
- "Alarm": Motor has stopped (flashing red indicator lights).
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control
enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".
The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required:
• two dedicated digital inputs
• three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V
• 5 V voltage supply to potentiometer and sensor
• one analog output, 0-10 V, 0(4)-20 mA
• two configurable digital inputs or open-collector outputs
• two Pt100/Pt1000 inputs
• LiqTec, dry-running protection sensor input
• Grundfos Digital Sensor input and output
• 24 V voltage supply for sensors
• two signal-relay outputs (potential-free contacts)
• GENIbus connection
• interface for Grundfos CIM fieldbus module.
DOWNLOAD THE DATA SHEET FOR MORE INFORMATION.
Suitable for
- Drip micro spray
- Frost protection
- Pivot pressure boosting
- Commercial air conditioning
- Commercial fire protection
- Commercial heating
- Commercial water pressure boosting
- District cooling
- District heating
- Drinking water treatment
- Irrigation
- Industrial cooling
- Desalination
- Industrial heating
- Machining
- Process liquids transfer
- Industrial process water treatment
- Industrial cleaning process
- Industrial water supply & transfer
- Industrial wastewater treatment & reuse
- Solar water solutions
- Surface water intake
- Municipal solar solutions
- Water distribution
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free for all orders except for some low cost or difficult to transport pumps where standard delivery is £6.20.
Please contact us for the estimated standard delivery times of the products that we have in stock, either by calling 01473 719950, or by dropping us an email at info@anglianpumping.com.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Related products
CRNE 1-4 N-FGJ-A-E-HQQE Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are…
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other…
Grundfos CRIE 1-4 N-CA-A-E-HQQE 98389381 with sensor The E-pump MGE motor is designed to EN standards. The built-in frequency converter enables continuously variable control of…
Grundfos CRI vertical mulistage pump with suction and discharge ports in-line. Pump material in contact with the liquid are stainless steel. A cartridge shaft seal…
CRNE 1-4 A-FGJ-A-E-HQQE Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are…
Grundfos DDA-S FC Digital Dosing Pumps Grundfos SMART Digital range of dosing pumps delivers unrivalled precision in water treatment, and chemical and process engineering; thanks…