Name: Pedrollo FG-80/200B Bare Shaft 2104230
Brand: Pedrollo
SKU: 2104230
Price: 3256.2 GBP
Availability: InStock

In stock

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

The Pedrollo FG-80/200B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 30 kW (40 HP) 2-pole motor it delivers up to 3650 l/min and 56 m head; it can also be driven by a 4-pole motor for a quieter, lower-head duty.

Pump end only, supplied without motor, coupling or baseplate. Cast iron body and impeller, flanged connections. Counter flanges available on request.

3650l/min

Max flow

56m

Max head

30kW

40 HP

2pole

2,900 rpm

Bare shaftEN 733 standardisedFlanged DN 32–1002-pole or 4-pole driveCast ironCode 2104230

Full Description

More about this product

Full Description

Product overview

The Pedrollo FG-80/200B is a bare shaft single-impeller centrifugal pump built to EN 733 dimensions, with flanged suction and delivery and its own bearing housing. Driven by a 30 kW (40 HP) 2-pole motor at 2,900 rpm it covers 500 to 3650 l/min with a working head of 56 m down to 34.5 m. Driven at 1,450 rpm by a 4-pole motor the duty drops to roughly half the flow and a quarter of the head; the 4-pole figures are in the specification table.

A bare shaft pump is the choice when the motor has to be something other than a standard close-coupled unit: a diesel engine on an irrigation or fire set, an ATEX motor, a specific make of motor the site standardises on, or where the pump and motor must be separately serviceable. The pump mounts on a baseplate with a flexible coupling and guard. Pedrollo supply the pump end; we can quote the motor, coupling and baseplate to suit.

3650l/min

Max flow

56m

Max head

30kW

40 HP

2pole

2,900 rpm

Key features

Bare shaft

Pump end with bearing housing, for coupling to any suitable motor or engine.

EN 733 standard

Interchangeable with other standardised pumps of the same size.

2-pole or 4-pole

Published duties for both speeds; choose the motor to suit the job.

Flanged connections

Flanged suction and delivery; counter flanges available on request.

Cast iron

Cast iron body and impeller for long service.

Engine drive

Suits diesel-driven irrigation and standby sets.

Typical applications

Diesel-driven sets

Irrigation, standby and remote sites without mains power.

Baseplate pump sets

Where pump and motor must be separately replaceable.

Special motors

ATEX, high-efficiency or customer-specified motors.

Industrial process

Cooling and transfer water in plant with its own drive standards.

Technical specifications

Brand / Series	Pedrollo — FG
Model	FG-80/200B
Pedrollo code	2104230
Supply	bare shaft (motor not included)
Motor required (2-pole)	30 kW / 40 HP
Motor	Not included — bare shaft pump for coupling to a 2-pole or 4-pole motor
Flow range (2-pole)	500–3650 l/min
Head range (2-pole)	56–34.5 m
Pump body	Cast iron
Impeller	Cast iron
Delivery flange	DN 80 (EN 733 dimensions)
Counter flanges	Not included — counter flanges available on request
Motor required (4-pole)	4 kW / 5.5 HP
Flow range (4-pole)	15–9.5 m³/h
Head range (4-pole)	14–8.5 m
Flow range (2-pole)	30–219 m³/h
Liquid	Clean water, not chemically aggressive to the pump materials

FG DN 80 sizes

Model	Code	Supply	Power	Flow	Head
FG-80/160D	2104190	Bare Shaft	11 kW / 15 HP	500–4000 l/min	25–10 m
FG-80/160C	2104200	Bare Shaft	15 kW / 20 HP	500–4000 l/min	30–15 m
FG-80/160B	2104210	Bare Shaft	18.5 kW / 25 HP	500–4000 l/min	35–20 m
FG-80/160A	2104220	Bare Shaft	22 kW / 30 HP	500–4000 l/min	40–25 m
FG-80/200B	2104230	Bare Shaft	30 kW / 40 HP	500–3650 l/min	56–34.5 m
FG-80/200A	2104240	Bare Shaft	37 kW / 50 HP	500–3900 l/min	62–40 m
FG-80/250B	2104250	Bare Shaft	45 kW / 60 HP	600–3600 l/min	77–54 m
FG-80/250A	2104260	Bare Shaft	55 kW / 75 HP	600–3900 l/min	88.5–60 m

Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.

Frequently asked questions

Is a motor included?

No. The FG is the pump end only. You need a motor of the size shown (2-pole or 4-pole), a flexible coupling, a coupling guard and a baseplate. Ask us to quote a complete set.

Which motor size do I need?

For 2-pole (2,900 rpm) drive: 30 kW. For 4-pole (1,450 rpm) drive: 4 kW. The figures are in the specification table.

Are the flanges included?

No. Counter flanges, nuts, bolts and gaskets are available separately — ask us when ordering.

How does it compare with the F and F4?

Same EN 733 hydraulics. The F and F4 are close-coupled monoblock pumps with the motor built in; the FG is the pump end alone for you to drive.

Downloads

Data Sheet PDF
Download

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.