Pedrollo FG Bare Shaft Standardised Centrifugal Pumps
The Pedrollo FG range are bare shaft centrifugal pumps to EN 733 (DIN 24255): the pump end only, with its own bearing housing, for coupling to your choice of motor or engine on a baseplate. The same hydraulics as the F and F4 monoblock ranges, but with the freedom to fit a 2-pole or 4-pole motor, a diesel engine, or a motor to your site’s specification.
Cast iron body and impeller with flanged connections from DN 32 to DN 100. Pedrollo publish duties for both 2-pole (2,900 rpm) and 4-pole (1,450 rpm) drive: up to 345 m³/h and 97 m head at 2-pole. Motor, coupling and baseplate are not included. Counter flanges available on request.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| FG-32/160C | 2103700 | Bare Shaft | 1.5 kW / 2 HP | 100–350 l/min | 24–14 m |
| FG-32/160B | 2103710 | Bare Shaft | 2.2 kW / 3 HP | 100–400 l/min | 30–17 m |
| FG-32/160A | 2103720 | Bare Shaft | 3 kW / 4 HP | 100–450 l/min | 37–24 m |
| FG-32/200C | 2103730 | Bare Shaft | 4 kW / 5.5 HP | 100–450 l/min | 44–31.5 m |
| FG-32/200B | 2103740 | Bare Shaft | 5.5 kW / 7.5 HP | 100–500 l/min | 51–36 m |
| FG-32/200A | 2103750 | Bare Shaft | 7.5 kW / 10 HP | 100–500 l/min | 57–44 m |
| FG-32/200BH | 2103760 | Bare Shaft | 3 kW / 4 HP | 100–300 l/min | 45–37 m |
| FG-32/200AH | 2103770 | Bare Shaft | 4 kW / 5.5 HP | 100–320 l/min | 55–44 m |
| FG-32/250C | 2103780 | Bare Shaft | 9.2 kW / 12.5 HP | 100–400 l/min | 75–55 m |
| FG-32/250B | 2103790 | Bare Shaft | 11 kW / 15 HP | 100–450 l/min | 87–62 m |
| FG-32/250A | 2103800 | Bare Shaft | 15 kW / 20 HP | 100–480 l/min | 97–70 m |
| FG-40/160C | 2103840 | Bare Shaft | 2.2 kW / 3 HP | 100–600 l/min | 27–14 m |
| FG-40/160B | 2103850 | Bare Shaft | 3 kW / 4 HP | 100–600 l/min | 32–20 m |
| FG-40/160A | 2103860 | Bare Shaft | 4 kW / 5.5 HP | 100–700 l/min | 38–20 m |
| FG-40/200B | 2103870 | Bare Shaft | 5.5 kW / 7.5 HP | 100–700 l/min | 47–28 m |
| FG-40/200A | 2103880 | Bare Shaft | 7.5 kW / 10 HP | 100–700 l/min | 55–41 m |
| FG-40/250C | 2103890 | Bare Shaft | 9.2 kW / 12.5 HP | 100–700 l/min | 64–47 m |
| FG-40/250B | 2103900 | Bare Shaft | 11 kW / 15 HP | 100–700 l/min | 71–55 m |
| FG-40/250A | 2103910 | Bare Shaft | 15 kW / 20 HP | 100–700 l/min | 88–72 m |
| FG-50/125C | 2103920 | Bare Shaft | 2.2 kW / 3 HP | 300–1200 l/min | 17.5–6 m |
| FG-50/125B | 2103930 | Bare Shaft | 3 kW / 4 HP | 300–1200 l/min | 20.7–9 m |
| FG-50/125A | 2103940 | Bare Shaft | 4 kW / 5.5 HP | 300–1200 l/min | 23.5–13 m |
| FG-50/160C | 2103950 | Bare Shaft | 4 kW / 5.5 HP | 300–1000 l/min | 27–16 m |
| FG-50/160B | 2103960 | Bare Shaft | 5.5 kW / 7.5 HP | 300–1100 l/min | 32–21 m |
| FG-50/160A | 2103970 | Bare Shaft | 7.5 kW / 10 HP | 300–1100 l/min | 37–27 m |
| FG-50/200C | 2103980 | Bare Shaft | 11 kW / 15 HP | 400–1700 l/min | 44–30 m |
| FG-50/200B | 2103990 | Bare Shaft | 15 kW / 20 HP | 400–1700 l/min | 52–38 m |
| FG-50/200A | 2104000 | Bare Shaft | 18.5 kW / 25 HP | 400–1800 l/min | 61–45 m |
| FG-50/200AR | 2104010 | Bare Shaft | 22 kW / 30 HP | 400–1800 l/min | 69–53 m |
| FG-50/250D | 2104020 | Bare Shaft | 9.2 kW / 12.5 HP | 300–900 l/min | 50.5–37 m |
| FG-50/250C | 2104030 | Bare Shaft | 11 kW / 15 HP | 300–1000 l/min | 59–43 m |
| FG-50/250B | 2104040 | Bare Shaft | 15 kW / 20 HP | 300–1000 l/min | 72–59 m |
| FG-50/250A | 2104050 | Bare Shaft | 18.5 kW / 25 HP | 300–1000 l/min | 85–73 m |
| FG-50/250AR | 2104060 | Bare Shaft | 22 kW / 30 HP | 300–1000 l/min | 95–83 m |
| FG-65/125C | 2104070 | Bare Shaft | 4 kW / 5.5 HP | 600–1800 l/min | 16–11 m |
| FG-65/125B | 2104080 | Bare Shaft | 5.5 kW / 7.5 HP | 600–1800 l/min | 18–13 m |
| FG-65/125A | 2104090 | Bare Shaft | 7.5 kW / 10 HP | 600–2200 l/min | 23–18 m |
| FG-65/160C | 2104100 | Bare Shaft | 9.2 kW / 12.5 HP | 600–2200 l/min | 32–22 m |
| FG-65/160B | 2104110 | Bare Shaft | 11 kW / 15 HP | 600–2400 l/min | 36.5–23 m |
| FG-65/160A | 2104120 | Bare Shaft | 15 kW / 20 HP | 600–2400 l/min | 40.5–28 m |
| FG-65/200B | 2104130 | Bare Shaft | 15 kW / 20 HP | 200–2400 l/min | 44–30.5 m |
| FG-65/200A | 2104140 | Bare Shaft | 18.5 kW / 25 HP | 200–2500 l/min | 50–36.5 m |
| FG-65/200AR | 2104150 | Bare Shaft | 22 kW / 30 HP | 200–2600 l/min | 57–42 m |
| FG-65/250C | 2104160 | Bare Shaft | 30 kW / 40 HP | 400–2350 l/min | 76–53 m |
| FG-65/250B | 2104170 | Bare Shaft | 37 kW / 50 HP | 400–2500 l/min | 87–62 m |
| FG-65/250A | 2104180 | Bare Shaft | 45 kW / 60 HP | 400–2600 l/min | 95–68 m |
| FG-80/160D | 2104190 | Bare Shaft | 11 kW / 15 HP | 500–4000 l/min | 25–10 m |
| FG-80/160C | 2104200 | Bare Shaft | 15 kW / 20 HP | 500–4000 l/min | 30–15 m |
| FG-80/160B | 2104210 | Bare Shaft | 18.5 kW / 25 HP | 500–4000 l/min | 35–20 m |
| FG-80/160A | 2104220 | Bare Shaft | 22 kW / 30 HP | 500–4000 l/min | 40–25 m |
| FG-80/200B | 2104230 | Bare Shaft | 30 kW / 40 HP | 500–3650 l/min | 56–34.5 m |
| FG-80/200A | 2104240 | Bare Shaft | 37 kW / 50 HP | 500–3900 l/min | 62–40 m |
| FG-80/250B | 2104250 | Bare Shaft | 45 kW / 60 HP | 600–3600 l/min | 77–54 m |
| FG-80/250A | 2104260 | Bare Shaft | 55 kW / 75 HP | 600–3900 l/min | 88.5–60 m |
| FG-100/160C | 2104270 | Bare Shaft | 15 kW / 20 HP | 1000–5000 l/min | 28.5–11 m |
| FG-100/160B | 2104280 | Bare Shaft | 18.5 kW / 25 HP | 1000–5500 l/min | 32.5–11 m |
| FG-100/160A | 2104290 | Bare Shaft | 22 kW / 30 HP | 1000–6000 l/min | 37–13 m |
| FG-100/200C | 2104300 | Bare Shaft | 30 kW / 40 HP | 800–4650 l/min | 51–28 m |
| FG-100/200B | 2104310 | Bare Shaft | 37 kW / 50 HP | 800–4900 l/min | 57–33 m |
| FG-100/200A | 2104320 | Bare Shaft | 45 kW / 60 HP | 800–5250 l/min | 63–38 m |
| FG-100/250B | 2104330 | Bare Shaft | 55 kW / 75 HP | 800–5150 l/min | 75–48 m |
| FG-100/250A | 2104340 | Bare Shaft | 75 kW / 100 HP | 800–5750 l/min | 89–58 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
Showing 1–30 of 62 products
The Pedrollo FG-32/160C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 1.5 kW (2 HP) 2-pole motor…
The Pedrollo FG-32/160B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 2.2 kW (3 HP) 2-pole motor…
The Pedrollo FG-32/160A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 3 kW (4 HP) 2-pole motor…
The Pedrollo FG-32/200C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 4 kW (5.5 HP) 2-pole motor…
The Pedrollo FG-32/200B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 5.5 kW (7.5 HP) 2-pole motor…
The Pedrollo FG-32/200A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 7.5 kW (10 HP) 2-pole motor…
The Pedrollo FG-32/200BH is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 3 kW (4 HP) 2-pole motor…
The Pedrollo FG-32/200AH is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 4 kW (5.5 HP) 2-pole motor…
The Pedrollo FG-32/250C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 9.2 kW (12.5 HP) 2-pole motor…
The Pedrollo FG-32/250B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 11 kW (15 HP) 2-pole motor…
The Pedrollo FG-32/250A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 15 kW (20 HP) 2-pole motor…
The Pedrollo FG-40/160C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 2.2 kW (3 HP) 2-pole motor…
The Pedrollo FG-40/160B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 3 kW (4 HP) 2-pole motor…
The Pedrollo FG-40/160A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 4 kW (5.5 HP) 2-pole motor…
The Pedrollo FG-40/200B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 5.5 kW (7.5 HP) 2-pole motor…
The Pedrollo FG-40/200A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 7.5 kW (10 HP) 2-pole motor…
The Pedrollo FG-40/250C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 9.2 kW (12.5 HP) 2-pole motor…
The Pedrollo FG-40/250B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 11 kW (15 HP) 2-pole motor…
The Pedrollo FG-40/250A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 15 kW (20 HP) 2-pole motor…
The Pedrollo FG-50/125C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 2.2 kW (3 HP) 2-pole motor…
The Pedrollo FG-50/125B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 3 kW (4 HP) 2-pole motor…
The Pedrollo FG-50/125A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 4 kW (5.5 HP) 2-pole motor…
The Pedrollo FG-50/160C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 4 kW (5.5 HP) 2-pole motor…
The Pedrollo FG-50/160B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 5.5 kW (7.5 HP) 2-pole motor…
The Pedrollo FG-50/160A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 7.5 kW (10 HP) 2-pole motor…
The Pedrollo FG-50/200C is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 11 kW (15 HP) 2-pole motor…
The Pedrollo FG-50/200B is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 15 kW (20 HP) 2-pole motor…
The Pedrollo FG-50/200A is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 18.5 kW (25 HP) 2-pole motor…
The Pedrollo FG-50/200AR is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 22 kW (30 HP) 2-pole motor…
The Pedrollo FG-50/250D is a bare shaft EN 733 centrifugal pump for coupling to your own motor. With a 9.2 kW (12.5 HP) 2-pole motor…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo FG Bare Shaft Standardised Centrifugal Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What are centrifugal pumps used for?
Centrifugal pumps use a rotating impeller to move liquids and are commonly used for water transfer, circulation and industrial processes.
How do I choose a centrifugal pump?
Compare the required flow rate, total head, liquid characteristics and electrical supply with each pump’s performance curve.
Are centrifugal pumps suitable for dirty water?
Some are designed for clean water only, while others handle solids or wastewater. Check the particular pump’s permitted liquid and solids specification.