Grundfos SQE 3-30 96510156 - Anglian Pumping Services

Name: Grundfos SQE 3-30 96510156
Brand: Grundfos
SKU: 96510156
Price: 979.31 GBP
Availability: InStock

In stock

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

The Grundfos SQE 3-30 (96510156) is a 3″ stainless steel variable-speed submersible pump for shallow boreholes and wells, garden irrigation and well-to-tank transfer. It delivers 3 m³/h (50 litres/min) at 26 m head from a standard 230V single-phase supply. The 0.7 kW MSE3 permanent-magnet motor has dry-running protection, soft start and voltage protection built in. Pair it with a Grundfos CU 301 and it holds a constant pressure. It fits any borehole from 76 mm (3″) upwards.

3 m³/h

Rated flow at 26 m

36 m

Max. head

0.7 kW

230V single-phase

76 mm

Min. borehole

Performance at 50 Hz, full speed

Flow (l/min)	0	15	30	45	60	70
Head (m)	36	35	33	28	22	15
Pressure (bar)	3.5	3.4	3.2	2.8	2.1	1.5

Head is what the pump produces. Your pressure at the surface is that figure less the depth to the pumping water level and the pipe losses.

Variable speed
CU 301 compatible
Dry-run protection
Soft start
Rp 1¼ outlet
2-year warranty

Constant pressure needs a CU 301. The pump is supplied with a 1.5 m motor lead. 3-core drop cable and a cable joint kit are needed to reach the surface. We can size and supply the cable and the CU 301 package for your borehole.

Full Description

More about this product

Full Description

Grundfos SQE 3-30 overview

The SQE 3-30 is the entry model in the Grundfos SQE 3 family, a 2-stage pump rated at 3 m³/h. The SQ(E) 3 is the most popular family for UK domestic private water supplies because it has enough flow to run several taps and a shower at once. This shallow-lift model suits boreholes and wells where the water sits within about 10 m of the surface. It also works well for garden irrigation, filling a storage tank from a well, and feeding a surface booster set.

It uses the same pump end as the SQ 3-30 with Grundfos’ MSE3 variable-speed motor. Run on its own, it behaves like a standard SQ. Connect a CU 301 control unit and it becomes a constant-pressure system. The pump speeds up and slows down to hold the pressure you set, communicates with the CU 301 over the existing power cable, and reports faults on the CU 301 display.

50 l/min

At 26 m head

36 m

Max. head (closed valve)

5.2 A

Rated current

4.8 kg

Net weight

Performance

These figures are at full speed. Head is the total lift the pump must provide: depth to the pumping water level, plus height to the outlet, plus pipe losses, plus the pressure you want, at about 10 m per bar.

Flow (m³/h)	Flow (l/min)	Head (m)	Equivalent pressure
0	0	36	3.6 bar (closed valve)
1.5	25.0	34	3.4 bar
2.0	33.3	32	3.2 bar
2.5	41.7	30	3.0 bar
3.0	50.0	26	2.6 bar (rated point)
3.5	58.3	22	2.2 bar

Worked example: pumping water level 4 m, plus a 1 m rise to the plant room, plus about 1 m of pipe losses, plus the CU 301’s minimum 2.0 bar (20 m) set point, gives 26 m. The SQE 3-30 holds that pressure at up to about 3 m³/h. With the water at 10 m, the same set point drops it to about 2 m³/h. For a house supply at a higher set pressure, or a deeper water level, step up to the SQE 3-40.

Key features

Constant pressure with CU 301

Set the pressure you want on the CU 301 and the SQE varies its speed to hold it as taps open and close. You get steady showers, fewer starts and stops, and a smaller pressure vessel.

No extra cables

The SQE and CU 301 communicate over the pump’s own power cable, so no signal wire goes down the borehole. Faults and alarms show on the CU 301 display.

Dry-running protection

The motor monitors its own power draw. It cuts out if the borehole runs dry and restarts automatically once water has recovered, which protects both pump and borehole.

Soft start and voltage protection

A smooth ramp-up keeps start current low and reduces water hammer. Over- and under-voltage protection stops the motor below 150V or above 315V instead of burning out.

Built for real boreholes

Floating impellers with tungsten carbide/ceramic bearings tolerate sand up to 50 g/m³. A spring-loaded non-return valve is built into the pump top.

Stainless steel construction

Pump sleeve and motor are EN 1.4301 (AISI 304) stainless steel with glass-reinforced polyamide hydraulics, for a long life in clean groundwater (pH 5–9).

Technical specification

Model / part number	Grundfos SQE 3-30 / 96510156
Rated flow / head	3 m³/h at 26 m
Max. head	36 m
Stages	2
Motor	Grundfos MSE3 variable-speed permanent-magnet, 0.7 kW (P2)
Supply	1 × 200–240V, 50 Hz
Power input (P1) / rated current	1.02 kW / 5.2 A
Rated speed	10,700 rpm
Controls	Grundfos CU 300 / CU 301 (power-line communication)
Enclosure / insulation class	IP68 / F
Outlet	Rp 1¼ female
Min. borehole diameter	76 mm (3″)
Overall length	741 mm
Net weight	4.8 kg
Max. liquid temperature	35 °C
Max. sand content	50 g/m³
Materials	Stainless steel EN 1.4301 (AISI 304), polyamide impellers
Non-return valve	Built in
Motor lead	1.5 m (3-core drop cable required)
Warranty	2 years

Installation notes

Hang the pump below the lowest expected pumping water level. It must be fully submerged before it is switched on.
Use 3-core submersible drop cable. Grundfos SQ/SQE motors do not take a 4-core cable. Join it to the motor lead with a heat-shrink cable joint kit.
Size the cable to the run length and keep voltage drop low. Ask us and we’ll confirm the cross-section for your depth.
For constant pressure, fit the CU 301 with its pressure sensor and a small diaphragm pressure vessel on the surface pipework.
Check the borehole yield can sustain 3 m³/h. If the yield test is lower, an SQE 2 or SQE 1 is a safer match.

Don’t need constant pressure? The Grundfos SQ 3-30 (96510204) uses the same pump end with a fixed-speed MS3 motor and runs from a standard pressure switch and vessel.

Grundfos SQE 3-30 FAQs

How much water does the Grundfos SQE 3-30 pump?

At full speed it delivers about 3 m³/h (50 litres/min) at 26 m of total head, and up to 58 litres/min at 22 m. It stops delivering at 36 m.

What’s the difference between the SQE 3-30 and SQ 3-30?

They have the same pump end, performance and borehole fit. The SQE has the MSE3 variable-speed motor, so with a CU 301 it gives constant pressure. The SQ is fixed-speed and runs from a pressure switch.

Is the SQE 3-30 suitable for a house supply?

Yes, if the water level is shallow. 3 m³/h covers most family homes, but with 36 m maximum head it suits boreholes and wells where the water sits within about 10 m of the surface. For deeper water or a higher set pressure, choose the SQE 3-40 or above.

Do I need a CU 301?

Only for constant pressure. Without one, the SQE runs at fixed speed like a standard SQ. With a CU 301, you set the pressure on the control unit (2–5 bar, in 0.5 bar steps) and the pump adjusts its speed to hold it.

What happens if my borehole runs dry?

The SQE senses the drop in power when there is no water, stops itself, and restarts automatically once the water recovers. With a CU 301 fitted, the dry-running alarm also shows on its display.

What cable does it need?

A 3-core submersible drop cable (live, neutral, earth) from the 1.5 m motor lead to the surface, joined with a heat-shrink joint kit. The CU 301 uses the same cable to talk to the pump, so no extra wiring is needed.

Downloads

instructions PDF
Download
Data Sheet PDF
Download

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.

You may also need

Grundfos SQ / SQE Accessories

Constant pressure package 96524504

Grundfos Constant pressure package, single-phaseCU 301 are designed for communication, monitoring and control of SQE submersible pumps in constant pressure applications.Single-phase

View Product

Grundfos SQ / SQE Accessories

CU301 control box commercial 96436753

Grundfos CU 301 constant-pressure control box for SQE borehole pumpsControl box for SQE pumps that keeps a constant pressure at the taps. It communicates with…

View Product

Grundfos SQ / SQE Accessories

Drop cable 3 x 2.5mm per metre 00ID7947

Grundfos Drop cable 3 x 2.5mm per metreGenuine Grundfos part: Drop cable 3 x 2.5mm per metre.3G 2,5Cable size

View Product

Grundfos SQ / SQE Accessories

Heat shrink cable joint, 3 x 1.5-2.5mm 96023762

Heat shrink cable joint, 3 x 1.5-2.5mmHeat shrink cable joint kit for Grundfos SQ and SQE borehole pumps, for 3-core cable from 1.5 to 2.5…

View Product

Frequently Asked Questions

Quick answers to common questions about the Grundfos SQE 3-30 96510156. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What types of Grundfos pumps are available?

Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.

How do I identify the correct Grundfos pump model?

Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.

Can a Grundfos pump improve household water pressure?

A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.

More about this product

Grundfos SQE 3-30 overview

Performance

Key features

Technical specification

Installation notes

Grundfos SQE 3-30 FAQs

You may also need

Related products

Frequently Asked Questions