Grundfos SQE Pumps
Grundfos SQE 5-25 96510164
- Established 1975
- Trusted by thousands of customers
The Grundfos SQE 5-25 (96510164) is a 3″ stainless steel variable-speed submersible pump for high flow at moderate head. Use it for shallow boreholes and wells, irrigation, tank filling and water transfer. It delivers 5 m³/h (83 litres/min) at 23 m head from a standard 230V single-phase supply. The 0.7 kW MSE3 permanent-magnet motor has built-in dry-running protection, soft start and voltage protection. It fits any borehole from 76 mm (3″) upwards.
| Flow (l/min) | 0 | 25 | 50 | 75 | 100 | 120 |
|---|---|---|---|---|---|---|
| Head (m) | 36 | 34 | 31 | 26 | 18 | 8 |
| Pressure (bar) | 3.5 | 3.3 | 3.0 | 2.5 | 1.7 | 0.7 |
Head is what the pump produces. Your pressure at the surface is that figure less the depth to the pumping water level and the pipe losses.
CU 301 compatible
Dry-run protection
Soft start
Rp 1½ outlet
2-year warranty
More about this product
Grundfos SQE 5-25 overview
The SQE 5-25 is the 2-stage model in the Grundfos SQE 5 family. It moves a large volume of water over a moderate lift: 5 m³/h at 23 m, and up to 6 m³/h at lower heads. Use it when the water is fairly close to the surface and flow matters more than pressure. Typical jobs are shallow boreholes and wells, garden, paddock and market-garden irrigation, filling storage or header tanks, livestock troughs and water transfer.
It uses the same pump end as the SQ 5-25, fitted with Grundfos’ MSE3 variable-speed motor. On its own it runs at fixed speed like a standard SQ. With a CU 301 it can hold a set pressure, communicating over the existing power cable. The CU 301’s lowest set point is 2 bar (20 m) and this pump closes off at 36 m, so constant pressure only works where the water is very shallow.
Performance
These figures are at full speed. Head is the total lift the pump has to provide: the depth to the pumping water level, plus the height to the outlet, plus pipe losses, plus any pressure you need (about 10 m for each bar).
| Flow (m³/h) | Flow (l/min) | Head (m) | Equivalent pressure |
|---|---|---|---|
| 0 | 0 | 36 | 3.6 bar (closed valve) |
| 3.0 | 50.0 | 31 | 3.1 bar |
| 3.5 | 58.3 | 29 | 2.9 bar |
| 4.0 | 66.7 | 28 | 2.8 bar |
| 5.0 | 83.3 | 23 | 2.3 bar (rated point) |
| 6.0 | 100.0 | 18 | 1.8 bar |
Key features
Technical specification
| Model / part number | Grundfos SQE 5-25 / 96510164 |
| Rated flow / head | 5 m³/h at 23 m |
| Max. head | 36 m |
| Stages | 2 |
| Motor | Grundfos MSE3 variable-speed permanent-magnet, 0.7 kW (P2) |
| Supply | 1 × 200–240V, 50 Hz |
| Power input (P1) / rated current | 1.02 kW / 5.2 A |
| Rated speed | 10,700 rpm |
| Controls | Grundfos CU 300 / CU 301 (power-line communication) |
| Enclosure / insulation class | IP68 / F |
| Outlet | Rp 1½ female |
| Min. borehole diameter | 76 mm (3″) |
| Overall length | 743 mm |
| Net weight | 4.8 kg |
| Max. liquid temperature | 35 °C |
| Max. sand content | 50 g/m³ |
| Materials | Stainless steel EN 1.4301 (AISI 304), polyamide impellers |
| Non-return valve | Built in |
| Motor lead | 1.5 m (3-core drop cable required) |
| Warranty | 2 years |
Installation notes
- Hang the pump below the lowest expected pumping water level. It must be fully submerged before you switch it on.
- Use 3-core submersible drop cable, because Grundfos SQ/SQE motors don’t take 4-core. Join it to the motor lead with a heat-shrink cable joint kit.
- Use 1½” pipework to match the Rp 1½ outlet. Smaller pipe adds friction losses that eat into the available head at this flow.
- If you fit a CU 301, its lowest set point is 2 bar (20 m). With this pump closing off at 36 m, that leaves about 11 m for lift and pipe losses at 3 m³/h, and only 3 m at 5 m³/h.
- At 5 m³/h it can draw a small or slow well down quickly, so check the yield first. The dry-running protection will stop it if the well empties.
Grundfos SQE 5-25 FAQs
-
instructions PDFDownload
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
You may also need
Grundfos Constant pressure package, single-phaseCU 301 are designed for communication, monitoring and control of SQE submersible pumps in constant pressure applications.Single-phase
Heat shrink cable joint, 3 x 1.5-2.5mmHeat shrink cable joint kit for Grundfos SQ and SQE borehole pumps, for 3-core cable from 1.5 to 2.5…
Grundfos CU 301 constant-pressure control box for SQE borehole pumpsControl box for SQE pumps that keeps a constant pressure at the taps. It communicates with…
Grundfos Drop cable 3 x 2.5mm per metreGenuine Grundfos part: Drop cable 3 x 2.5mm per metre.3G 2,5Cable size
Frequently Asked Questions
Quick answers to common questions about the Grundfos SQE 5-25 96510164. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What types of Grundfos pumps are available?
Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.
How do I identify the correct Grundfos pump model?
Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.
Can a Grundfos pump improve household water pressure?
A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.



