Grundfos SQE Pumps
Grundfos SQE 1-125 96510146
- Established 1975
- Trusted by thousands of customers
The Grundfos SQE 1-125 (96510146) is a 3″ stainless steel variable-speed submersible borehole pump for very deep, low-yield private water supplies. It delivers 1 m³/h (about 17 litres/min) at 135 m head from a standard 230V single-phase supply. The 1.55 kW MSE3 permanent-magnet motor has built-in dry-running protection, soft start and voltage protection. Pair it with a Grundfos CU 301 and it holds a constant pressure at the taps. It fits any borehole from 76 mm (3″) upwards.
| Flow (l/min) | 0 | 5 | 10 | 15 | 20 | 25 |
|---|---|---|---|---|---|---|
| Head (m) | 189 | 185 | 172 | 152 | 126 | 93 |
| Pressure (bar) | 18.6 | 18.1 | 16.9 | 14.9 | 12.3 | 9.1 |
Head is what the pump produces. Your pressure at the surface is that figure less the depth to the pumping water level and the pipe losses.
CU 301 compatible
Dry-run protection
Soft start
Rp 1¼ outlet
2-year warranty
More about this product
Grundfos SQE 1-125 overview
The SQE 1-125 is the 8-stage model in the Grundfos SQE 1 family and the first to use the larger 1.55 kW motor, which takes maximum head up to 189 m. It’s built for low-yield boreholes where the pumping water level sits around 90–100 m down, or where water has to be lifted from depth and then pushed up steep ground to a property, farm or header tank. Typical jobs are very deep private water supplies in hard-rock and upland areas, remote homes, holiday lets and livestock supplies.
It uses the same pump end as the SQ 1-125 with Grundfos’ MSE3 variable-speed motor. Run on its own, it behaves like a standard SQ. Connect a CU 301 control unit and it becomes a constant-pressure system. The pump speeds up and slows down to hold the pressure you set. It talks to the CU 301 over the existing power cable, and faults show on the CU 301 display.
Performance
Figures are at full speed. Head is the total lift the pump has to provide: depth to the pumping water level, plus height to the outlet, plus pipe losses, plus the pressure you want (about 10 m per bar).
| Flow (m³/h) | Flow (l/min) | Head (m) | Equivalent pressure |
|---|---|---|---|
| 0 | 0 | 189 | 18.9 bar (closed valve) |
| 0.5 | 8.3 | 177 | 17.7 bar |
| 1.0 | 16.7 | 135 | 13.5 bar (rated point) |
| 1.5 | 25.0 | 93 | 9.3 bar |
Key features
Technical specification
| Model / part number | Grundfos SQE 1-125 / 96510146 |
| Rated flow / head | 1 m³/h at 135 m |
| Max. head | 189 m |
| Stages | 8 |
| Motor | Grundfos MSE3 variable-speed permanent-magnet, 1.55 kW (P2) |
| Supply | 1 × 200–240V, 50 Hz |
| Power input (P1) / rated current | 2.32 kW / 11.2 A |
| Rated speed | 10,700 rpm |
| Controls | Grundfos CU 300 / CU 301 (power-line communication) |
| Enclosure / insulation class | IP68 / F |
| Outlet | Rp 1¼ female |
| Min. borehole diameter | 76 mm (3″) |
| Overall length | 942 mm |
| Net weight | 6.4 kg |
| Max. liquid temperature | 35 °C |
| Max. sand content | 50 g/m³ |
| Materials | Stainless steel EN 1.4301 (AISI 304), polyamide impellers |
| Non-return valve | Built in |
| Motor lead | 1.5 m (3-core drop cable required) |
| Warranty | 2 years |
Installation notes
- Hang the pump below the lowest expected pumping water level. It must be fully submerged before it is switched on.
- Use 3-core submersible drop cable, as Grundfos SQ/SQE motors don’t take 4-core. Join it to the motor lead with a heat-shrink cable joint kit.
- At 11.2 A over a cable run of 100 m or more, cable size matters. Undersized cable causes voltage drop and nuisance cut-outs, so let us confirm the cross-section for your depth.
- For constant pressure, fit the CU 301 with its pressure sensor and a small diaphragm pressure vessel on the surface pipework.
- The column can reach 18.9 bar against a closed valve, so use rising main and fittings rated for that.
Grundfos SQE 1-125 FAQs
-
instructions PDFDownload
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
You may also need
Grundfos Constant pressure package, single-phaseCU 301 are designed for communication, monitoring and control of SQE submersible pumps in constant pressure applications.Single-phase
Grundfos Drop cable 3 x 2.5mm per metreGenuine Grundfos part: Drop cable 3 x 2.5mm per metre.3G 2,5Cable size
Grundfos CU 301 constant-pressure control box for SQE borehole pumpsControl box for SQE pumps that keeps a constant pressure at the taps. It communicates with…
Heat shrink cable joint, 3 x 1.5-2.5mmHeat shrink cable joint kit for Grundfos SQ and SQE borehole pumps, for 3-core cable from 1.5 to 2.5…
Frequently Asked Questions
Quick answers to common questions about the Grundfos SQE 1-125 96510146. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What types of Grundfos pumps are available?
Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.
How do I identify the correct Grundfos pump model?
Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.
Can a Grundfos pump improve household water pressure?
A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.



