Calpeda E-MPS M Submersible Multi-Stage Pump 240V
- Close-coupled multi-stage submersible pumps
- Easy to install
- Compact
- Plug and play with integrated pressure transducer for automatic control of starting and stopping of the pump when utilisation points are opened/closed with an integrated non-return valve
- External jacket in stainless steel AISI 304 and stages Noryl
- Built-in capacitor, which is accessible through the delivery casing
- Hydraulics located below the motor with the motor cooled by the pumped fluid
- Safe operation possible with the motor only partially submerged
- Double shaft seal with oil chamber
- Suction strainer prevents the entrance of solids with diameter bigger than 2mm
- Water temperature: 35°C
- Minimum internal diameter of well: 140mm
- Minimum immersion depth: 100mm
- Maximum immersion depth: 20m (with suitable cable length)
- Continuous duty possible
- High efficiency asynchronous single-phase motor
- Capacitor less stressed in voltage
- Uniform and lower motor temperature
- Motor power control
- Programmable re-start pressure
- Programmable stop pressure
- No hydraulic losses due to the measuring devices
- Voltage and current control
- Monitoring of maximum starting current
- Dry-run protection
- Overload control and overheating motor control
- Pump blockage
- Power supply control
- Starts per hour control
- E-IDOS series
5 products
The Calpeda E-MPSM range features a series of close-coupled multi-stage submersible pumps. They are an easy-to-install option with a built-in capacitor, accessible through the delivery…
The Calpeda E-MPSM range features a series of close-coupled multi-stage submersible pumps. They are an easy-to-install option with a built-in capacitor, accessible through the delivery…
The Calpeda E-MPSM range features a series of close-coupled multi-stage submersible pumps. They are an easy-to-install option with a built-in capacitor, accessible through the delivery…
The Calpeda E-MPSM range features a series of close-coupled multi-stage submersible pumps. They are an easy-to-install option with a built-in capacitor, accessible through the delivery…
The Calpeda E-MPSM range features a series of close-coupled multi-stage submersible pumps. They are an easy-to-install option with a built-in capacitor, accessible through the delivery…
Frequently Asked Questions
Quick answers to common questions about the Calpeda E-MPS M Submersible Multi-Stage Pump 240V. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.