Pedrollo TRITUS-TX and TRITUS-INOX Grinder Pumps
The Pedrollo TRITUS-TX and TRITUS-INOX are single-phase submersible grinder pumps for domestic sewage. A hardened AISI 440C stainless steel blade cuts the solids and fibres in waste water so it can be pumped under pressure through small-diameter pipework. Five models deliver up to 250 l/min and up to 22.5 m head, with motors from 0.55 to 1.3 kW.
The compact TRITUS-TX has a technopolymer body, integrated vertical magnetic float switch and 5 m cable, and needs as little as 220 mm from the pit wall. The TRITUS-INOX TIGm has a cast iron body with 1½″ delivery, float switch and 10 m cable. All have built-in thermal protection, a Schuko plug and installation to 5 m depth.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| TRITUS-TX | 2305460 | Single Phase | 0.55 kW / 0.75 HP | 10–90 l/min | 11.5–1 m |
| TIGm 0.55 | 2302250 | Single Phase | 0.55 kW / 0.75 HP | 20–130 l/min | 14.5–2 m |
| TIGm 0.75 | 2302260 | Single Phase | 0.75 kW / 1 HP | 20–140 l/min | 17.5–2 m |
| TIGm 1.1 | 2305470 | Single Phase | 1.1 kW / 1.5 HP | 20–150 l/min | 22.5–2 m |
| TIGm 1.3 | 2305480 | Single Phase | 1.3 kW / 1.75 HP | 20–250 l/min | 20.5–2 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
5 products
The Pedrollo TRITUS-TX is a 0.55 kW (0.75 HP) submersible grinder pump for sewage on a 230 V single-phase supply, delivering up to 90 l/min…
The Pedrollo TIGm 0.55 is a 0.55 kW (0.75 HP) submersible grinder pump for sewage on a 230 V single-phase supply, delivering up to 130…
The Pedrollo TIGm 0.75 is a 0.75 kW (1 HP) submersible grinder pump for sewage on a 230 V single-phase supply, delivering up to 140…
The Pedrollo TIGm 1.1 is a 1.1 kW (1.5 HP) submersible grinder pump for sewage on a 230 V single-phase supply, delivering up to 150…
The Pedrollo TIGm 1.3 is a 1.3 kW (1.75 HP) submersible grinder pump for sewage on a 230 V single-phase supply, delivering up to 250…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo TRITUS-TX and TRITUS-INOX Grinder Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.