Pedrollo BC Double-Channel Sewage Pumps /50
The Pedrollo BC /50 is a submersible double-channel sewage pump for dirty water and sewage in domestic, civil and industrial settings. Six models, three single-phase and three three-phase, deliver up to 850 l/min and up to 16 m head, with motors from 0.75 to 1.5 kW.
Cast iron pump body with cataphoresis treatment, micro-cast AISI 304 two-channel impeller passing solids up to Ø 50 mm, AISI 304 base and motor sleeve, AISI 431 shaft and a double mechanical seal with an oil chamber. 2″ threaded delivery, epoxy-sealed cable entry, installation to 5 m depth. Single-phase BCm models include a float switch and Schuko plug.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| BCm 10/50 | 2301440 | Single Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| BCm 15/50 | 2301450 | Single Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
| BCm 20/50 | 2301460 | Single Phase | 1.5 kW / 2 HP | 50–850 l/min | 16–3 m |
| BC 10/50 | 2301470 | Three Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| BC 15/50 | 2301480 | Three Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
| BC 20/50 | 2301490 | Three Phase | 1.5 kW / 2 HP | 50–850 l/min | 16–3 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
6 products
The Pedrollo BCm 10/50 is a 0.75 kW (1 HP) submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to 600…
The Pedrollo BCm 15/50 is a 1.1 kW (1.5 HP) submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to 750…
The Pedrollo BCm 20/50 is a 1.5 kW (2 HP) submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to 850…
The Pedrollo BC 10/50 is a 0.75 kW (1 HP) submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to 600…
The Pedrollo BC 15/50 is a 1.1 kW (1.5 HP) submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to 750…
The Pedrollo BC 20/50 is a 1.5 kW (2 HP) submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to 850…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo BC Double-Channel Sewage Pumps /50. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.