Pedrollo BC Double-Channel Sewage Pumps /50
Pedrollo BCm 10/50 Single Phase 2301440
- Established 1975
- Trusted by thousands of customers
The Pedrollo BCm 10/50 is a 0.75 kW (1 HP) submersible double-channel pump for sewage on a 230 V single-phase supply, delivering up to 600 l/min and 11 m head.
Part of Pedrollo’s BC range, with a cast iron body, AISI 304 motor sleeve and an AISI 304 two-channel impeller for sewage and dirty water.
More about this product
Product overview
The Pedrollo BCm 10/50 is a 0.75 kW (1 HP) submersible double-channel pump for sewage and dirty water on a 230 V single-phase supply, covering 50 to 600 l/min with a working head of 11 m down to 2 m. The two-channel impeller gives high efficiency and extra pressure while passing solids up to Ø 50 mm.
The BC drains dirty water and sewage in domestic, civil and industrial settings, including waste water, surface water and sludge-mixed water with short fibres. It has a cataphoresis-treated cast iron body, micro-cast AISI 304 two-channel impeller, AISI 304 base and motor sleeve, an AISI 431 shaft and a double mechanical seal with silicon carbide faces in an oil chamber. The cable entry is encapsulated in epoxy resin for full protection against moisture.
Key features
Typical applications
Technical specifications
| Brand / Series | Pedrollo — BC |
| Model | BCm 10/50 |
| Pedrollo code | 2301440 |
| Supply | 230 V single-phase |
| Motor power (P2) | 0.75 kW / 1 HP |
| Motor | 230 V single-phase motor with built-in thermal protection |
| Flow range | 50–600 l/min |
| Head range | 11–2 m |
| Pump body | Cast iron (cataphoresis treated), ISO 228/1 threaded port |
| Base | AISI 304 stainless steel |
| Impeller | Two-channel, micro-cast AISI 304 stainless steel |
| Motor sleeve | AISI 304 stainless steel |
| Motor cover | AISI 304 stainless steel |
| Motor shaft | AISI 431 stainless steel |
| Mechanical seals | Double mechanical seal with oil chamber: silicon carbide / graphite / NBR (motor side), silicon carbide / silicon carbide / NBR (pump side) |
| Port | 2″ |
| Solids passage | Up to Ø 50 mm |
| Float switch | Included, with Schuko plug |
| Power cable | 5 m as standard, 10 m on request (H07 RN-F) |
| Minimum immersion (continuous) | 290 mm |
| Maximum depth | 5 m below water level |
| Liquid temperature | Up to +40 °C |
| Insulation / protection | Class F / IP X8 |
| Liquid | Sewage, waste water, surface water and sludge-mixed water |
BC /50 range
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| BCm 10/50 | 2301440 | Single Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| BCm 15/50 | 2301450 | Single Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
| BCm 20/50 | 2301460 | Single Phase | 1.5 kW / 2 HP | 50–850 l/min | 16–3 m |
| BC 10/50 | 2301470 | Three Phase | 0.75 kW / 1 HP | 50–600 l/min | 11–2 m |
| BC 15/50 | 2301480 | Three Phase | 1.1 kW / 1.5 HP | 50–750 l/min | 14–2 m |
| BC 20/50 | 2301490 | Three Phase | 1.5 kW / 2 HP | 50–850 l/min | 16–3 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
Frequently asked questions
What size solids will it pass?
Up to Ø 50 mm.
Does it have a float switch?
Single-phase BCm models include a float switch and Schuko plug. Three-phase models have no float switch and need a separate level control.
How long is the cable?
5 metres as standard on the BC 10/50 (10 metres on request), and 10 metres on the BC 15/50 and BC 20/50. Type H07 RN-F.
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
Lowara DIWA pumps Submersible pumps for dirty water manufactured in AISI 304 stainless steel. Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power.…
The AP series of Grundfos drainage pumps are designed for temporary and portable installations, but can also be installed on a permanent free-standing basis. The…
The Clarke PVP11A stainless steel pump ideal for heavy duty draining applications including pits, sumps, ditches, fottings etc. It can be used to remove both…
Grundfos are known throughout the drainage world for their high quality construction and easy-to-use products. The AP series is one of their most popular, offering…
Submersible sewage pump with a 40mm solids handling capacity. Cast iron construction suitable for pumping light domestic waste effluent septic tanks and large basements/cellars.
DOMO series, stainless steel electric pumps, are available with twin-channel or vortex impeller (DOMO VX). Designed to handle suspended solids up to 50mm in diameter…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo BCm 10/50 Single Phase 2301440. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.