Pedrollo VXC4 4-Pole Vortex Sewage Pumps
The Pedrollo VXC4 is a heavy-duty 4-pole submersible vortex pump (1,450 rpm) in thick cast iron, for sewage, sludge-mixed water, and activated and putrid sludge in sewers, tunnels, excavations, canals and underground car parks. Seven three-phase models deliver up to 5,000 l/min and up to 22.1 m head, with motors from 3 to 15 kW.
Cast iron pump body and VORTEX impeller with cataphoresis treatment, AISI 431 shaft and a double mechanical seal with an oil chamber. The VXC4 40 to 55/100 pass solids up to Ø 100 mm; the VXC4 100 to 200/80 pass solids up to Ø 80 mm. DN100 flanged delivery, 10 m cable, built-in thermal protection, installation to 10 m depth.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| VXC4 40/100 | 2302690 | Three Phase | 3 kW / 4 HP | 300–1700 l/min | 7.6–2 m |
| VXC4 50/100 | 2302700 | Three Phase | 3.7 kW / 5 HP | 300–2000 l/min | 10.2–2.7 m |
| VXC4 55/100 | 2302710 | Three Phase | 4 kW / 5.5 HP | 300–2200 l/min | 11.7–3 m |
| VXC4 100/80 | 2302720 | Three Phase | 7.5 kW / 10 HP | 800–4000 l/min | 14.7–4.5 m |
| VXC4 125/80 | 2302730 | Three Phase | 9.2 kW / 12.5 HP | 800–4250 l/min | 16.7–5 m |
| VXC4 150/80 | 2302740 | Three Phase | 11 kW / 15 HP | 800–4500 l/min | 18.8–5.5 m |
| VXC4 200/80 | 2302750 | Three Phase | 15 kW / 20 HP | 800–5000 l/min | 22.1–7 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
7 products
The Pedrollo VXC4 40/100 is a 3 kW (4 HP) 4-pole submersible vortex pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo VXC4 50/100 is a 3.7 kW (5 HP) 4-pole submersible vortex pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo VXC4 55/100 is a 4 kW (5.5 HP) 4-pole submersible vortex pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo VXC4 100/80 is a 7.5 kW (10 HP) 4-pole submersible vortex pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo VXC4 125/80 is a 9.2 kW (12.5 HP) 4-pole submersible vortex pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo VXC4 150/80 is a 11 kW (15 HP) 4-pole submersible vortex pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo VXC4 200/80 is a 15 kW (20 HP) 4-pole submersible vortex pump for sewage on a 400 V three-phase supply, delivering up to…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo VXC4 4-Pole Vortex Sewage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.