Pedrollo RXm 5/40-GM Single Phase 2300480

Name: Pedrollo RXm 5/40-GM Single Phase 2300480
Brand: Pedrollo
SKU: 2300480
Price: 1227 GBP
Availability: InStock

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

The Pedrollo RXm 5/40-GM is a 1.1 kW (1.5 HP) stainless steel vortex submersible pump for dirty water on a 230 V single-phase supply, delivering up to 380 l/min and 12.5 m head. A vertical magnetic float switch, suited to small sumps, starts and stops it with the water level.

Part of Pedrollo’s RX-VORTEX range, made entirely of stainless steel, with a VORTEX impeller for water containing suspended solids.

380l/min

Max flow

12.5m

Max head

1.1kW

1.5 HP

230V

Single Phase

Vertical magnetic float switchVORTEX impellerAll stainless steelDirty waterCode 2300480

Full Description

More about this product

Full Description

Product overview

The Pedrollo RXm 5/40-GM is a 1.1 kW (1.5 HP) stainless steel vortex submersible pump for dirty water on a 230 V single-phase supply, covering 20 to 380 l/min with a working head of 12.5 m down to 2 m. A vertical magnetic float switch starts and stops the pump with the water level.

RX-VORTEX pumps are made entirely of stainless steel, with a VORTEX impeller in AISI 304. They pass suspended solids up to Ø 20 mm on the RX 2/20 and 3/20 GM (draining to 25 mm from the floor), and up to Ø 40 mm on the RX 4/40 and 5/40 GM (draining to 50 mm). A double seal with an oil chamber protects the motor, with two mechanical seals on the 4/40 and 5/40. Liquid up to +50 °C (+90 °C for up to 3 minutes).

380l/min

Max flow

12.5m

Max head

1.1kW

1.5 HP

230V

Single Phase

Key features

Magnetic float switch

Vertical magnetic float switch, suited to small sumps.

VORTEX impeller

AISI 304 stainless steel, passing solids up to Ø 20 or 40 mm.

All stainless steel

AISI 304 pump with an AISI 431 shaft and oil chamber seals.

IP X8 motor

Submersible motor with built-in thermal protection.

Typical applications

Dirty water drainage

Water with suspended solids from pits, sumps and flooded areas.

Sump emptying

Permanent installations in small sumps.

Transfer

Moving dirty water to a drain or discharge point.

Technical specifications

Brand / Series	Pedrollo — RX GM
Model	RXm 5/40-GM
Pedrollo code	2300480
Supply	230 V single-phase
Motor power (P2)	1.1 kW / 1.5 HP
Motor	230 V single-phase motor with built-in thermal protection
Flow range	20–380 l/min
Head range	12.5–2 m
Pump body	AISI 304 stainless steel
Impeller	VORTEX, AISI 304 stainless steel
Shaft	AISI 431 stainless steel
Seal	Double mechanical seal with oil chamber
Float switch	Vertical magnetic
Port	1½″
Solids passage	Up to Ø 40 mm
Drains down to	50 mm from the floor
Liquid temperature	Up to +50 °C (+90 °C for up to 3 minutes)
Maximum depth	10 m below water level
Power cable	5 m as standard, 10 m on request (H07 RN-F)
Protection	IP X8
Duty	Continuous S1
Liquid	Dirty water

RX GM range

Model	Code	Supply	Power	Flow	Head
RXm 1-GM	2300322	Single Phase	0.25 kW / 0.33 HP	20–160 l/min	7–2 m
RXm 2-GM	2300332	Single Phase	0.37 kW / 0.5 HP	20–190 l/min	9.5–2.8 m
RXm 3-GM	2300342	Single Phase	0.55 kW / 0.75 HP	20–220 l/min	11.5–3.5 m
RXm 4-GM	2300350	Single Phase	0.75 kW / 1 HP	20–270 l/min	15–4.2 m
RXm 5-GM	2300360	Single Phase	1.1 kW / 1.5 HP	20–320 l/min	19.5–5 m
RXm 2/20-GM	2300452	Single Phase	0.37 kW / 0.5 HP	20–190 l/min	7.5–2 m
RXm 3/20-GM	2300462	Single Phase	0.55 kW / 0.75 HP	20–240 l/min	9.5–2 m
RXm 4/40-GM	2300470	Single Phase	0.75 kW / 1 HP	20–340 l/min	11–2 m
RXm 5/40-GM	2300480	Single Phase	1.1 kW / 1.5 HP	20–380 l/min	12.5–2 m

Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.

Frequently asked questions

What size solids will it pass?

Up to Ø 20 mm on the RXm 2/20-GM and 3/20-GM, and up to Ø 40 mm on the RXm 4/40-GM and 5/40-GM.

How long is the cable?

5 metres as standard, type H07 RN-F, with 10 metres available on request. Standard EN 60335-2-41 requires a 10 metre cable for outdoor use, so ask for the 10 m version if the pump will be used outside.

Clear or dirty water?

The VORTEX GM models are for dirty water. For clear water, choose the standard RX GM (RXm 1-GM to 5-GM).

Downloads

Data Sheet PDF
Download

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.

Frequently Asked Questions

Quick answers to common questions about the Pedrollo RXm 5/40-GM Single Phase 2300480. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What is a submersible pump?

A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.

Can submersible pumps handle solids and sewage?

Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.

When should I use a submersible pump instead of a surface pump?

Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.