Pedrollo RX GM Submersible Drainage Pumps
The Pedrollo RX GM is a stainless steel submersible drainage pump with a vertical magnetic float switch that starts and stops it with the water level and suits small sumps. The standard RX GM is for clear water; the RX GM VORTEX models handle dirty water with solids up to Ø 20 or 40 mm.
Made entirely of stainless steel: AISI 304 pump body, impeller and motor casing, with an AISI 431 shaft and a double seal with oil chamber. Single-phase 230 V with built-in thermal protection, IP X8, from 0.25 to 1.1 kW, delivering up to 380 l/min or up to 19.5 m head. Power cable 5 m as standard, 10 m on request.
9 products
The Pedrollo RXm 1-GM is a 0.25 kW (0.33 HP) stainless steel submersible drainage pump on a 230 V single-phase supply, delivering up to 160…
The Pedrollo RXm 2-GM is a 0.37 kW (0.5 HP) stainless steel submersible drainage pump on a 230 V single-phase supply, delivering up to 190…
The Pedrollo RXm 3-GM is a 0.55 kW (0.75 HP) stainless steel submersible drainage pump on a 230 V single-phase supply, delivering up to 220…
The Pedrollo RXm 4-GM is a 0.75 kW (1 HP) stainless steel submersible drainage pump on a 230 V single-phase supply, delivering up to 270…
The Pedrollo RXm 5-GM is a 1.1 kW (1.5 HP) stainless steel submersible drainage pump on a 230 V single-phase supply, delivering up to 320…
The Pedrollo RXm 2/20-GM is a 0.37 kW (0.5 HP) stainless steel vortex submersible pump for dirty water on a 230 V single-phase supply, delivering…
The Pedrollo RXm 3/20-GM is a 0.55 kW (0.75 HP) stainless steel vortex submersible pump for dirty water on a 230 V single-phase supply, delivering…
The Pedrollo RXm 4/40-GM is a 0.75 kW (1 HP) stainless steel vortex submersible pump for dirty water on a 230 V single-phase supply, delivering…
The Pedrollo RXm 5/40-GM is a 1.1 kW (1.5 HP) stainless steel vortex submersible pump for dirty water on a 230 V single-phase supply, delivering…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo RX GM Submersible Drainage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.