Grundfos KP Pumps
KP 350-A-1 230v 013N7800
In stock
- Established 1975
- Trusted by thousands of customers
The KP range of pumps from Grundfos is suitable for both temporary and permanent free-standing installation, as well as installation within a collecting tank. Easy-to-install, it’s an ideal investment for any water drainage system.
Designed for the pumping of drain water or grey wastewater, the Grundfos KP is a single stage drainage pump complete with a semi open impeller. Versatility is a key benefit of the KP, with all of the models delivered with or without a level switch designated as A, AV or M to suit either automatic or manual installation.
The design of the unit is focused on being robust, constructed from quality submersible stainless steel, with the outer casing being manufactured in one complete piece. The discharge port is placed on top of the pump, with the mains cable and the cable for the level switch combined into one vulcanized and water-tight plug. This in turn is secured to the socket of the stator housing (which is hermetically sealed). The motor is then cooled by the liquid pumped around it.
- Enclosure class: IP 68
- Insulation class: F
More about this product
The Grundfos KP series of pumps are suitable for a number of different situations, including (but not limited to):
- Dealing with rain and ground water in a horticultural setting
- Helping to drain water from rivers and lakes
- Pumping water into and out of containers, tanks, ponds, etc
- Helping to pump water from showers, washing machines and sinks below sewer level
- Dealing with pool water
- Helping the ditch drainage process
Units with single phase motors incorporate automatic overload protection, which means that the motor will cut out if there is a risk of an overload occurring. Once it cools to normal temperature, the motor will then restart automatically.
-
Data Sheet PDFDownload
-
technical PDFDownload
Standard delivery:
Standard delivery is free for all orders except for some low cost/low margin items where standard delivery is £6.50. Some difficult to transport goods also have a varying carriage charge applied.
Please contact us for the estimated standard delivery times of the products that we have in stock, either by calling 01473 719950, or by dropping us an email at info@anglianpumping.com.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £15.00 + vat delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
You may also need
Clarke Water Pump Components 1" suction hose
Multi Stepped Hosetail Allows the connection of 12, 19, 25, 32 and 38mm Flexi Hose
Clarke Delivery Hose – 10m This top quality layflat hose is suitable for use with Clarke 1 1/4" water pumps. Operating pressure 43.5 psi Burst pressure…
Clarke Delivery Hose – 10m x 1 1/4" This top quality layflat hose is suitable for use with Clarke 1 1/4" water pumps. Operating pressure 43.5…