DAB Divertron Pumps 230v
Divertron 1000X
In stock
- Established 1975
- Trusted by thousands of customers
Now supplied as the Divertron 650 X
Order this listing — we’ll send the new energy-efficient Divertron 650 X as a direct replacement.
The DAB Divertron 1000 X has been replaced by the new green-bodied Divertron 650 X. Same closed inlet, same KIT X compatibility, comparable performance, more efficient motor for lower running costs.
- Order this listing — we’ll supply the new Divertron 650 X
- Same 1″ closed inlet — works with your existing KIT X
- Same 1″ threaded discharge — drops into existing pipework
- More efficient motor for lower running costs
- Same integrated electronics & dry-run protection
DISPATCHED 3–4 WORKING DAYS
NEXT-DAY AVAILABLE
More about this product
Now supplied as the DAB Divertron 650 X
The DAB Divertron 1000 X has been replaced by the new energy-efficient Divertron 650 X as part of DAB’s updated (green-bodied) Divertron range. If you order this product, we’ll supply the new Divertron 650 X as a direct replacement — same 1″ pipe connection, same KIT X floating suction kit compatibility, comparable performance, more efficient motor for lower running costs.
The DAB Divertron 1000 X was the sediment-tolerant variant in DAB’s original Divertron range — a submersible multi-impeller booster pump configured with a closed inlet base for use with the KIT X floating suction kit. The kit drew water from just below the surface of the source, well above any sediment layer at the base.
It has now been discontinued and replaced by the new green-bodied Divertron 650 X, which uses a more efficient motor for the same duty. The information below covers the original 1000 X for reference; orders against this listing will be fulfilled with the new Divertron 650 X model.
What the 1000 X was used for
Rainwater tanks with sediment at the base, wells with sand or organic debris, and any source where the bottom 100–200 mm was best left undisturbed. The X variant used a closed inlet base paired with the KIT X floating suction kit, drawing cleaner water from above the sediment line — for less filter blockage and less impeller wear.
All these applications are covered by the new Divertron 650 X with the same suitability — and lower running costs.
Original Divertron 1000 X specifications
| Pressure range | 3.6 – 0.8 bar |
| Flow range | 0.5 – 5.0 m³/h |
| Motor (P2) | 0.65 kW |
| Power supply | 230 V, 50 Hz, single phase |
| Nominal current | 3.8 A |
| Inlet | 1″ female threaded (closed base) |
| Discharge connection | 1″ threaded |
| Status | Discontinued — replaced by Divertron 650 X |
Why the new Divertron 650 X is the right replacement
If you have an existing Divertron 1000 X installed and need a like-for-like replacement, the new Divertron 650 X is the direct successor. It uses the same closed inlet base, the same 1″ threaded discharge, and works with the same KIT X floating suction kit.
- Same 1″ threaded discharge — drops into existing pipework
- Compatible with your existing KIT X — keep the floating suction kit if it’s serviceable
- Comparable performance — similar head, flow and pressure envelope for typical duties
- Lower energy demand — more efficient motor for reduced running costs over its lifetime
- Same integrated electronics — pressure switch, flow sensor and dry-run protection built in
Need help choosing?
If you’re unsure whether the Divertron 650 X is the right fit for your existing setup — or whether your existing KIT X is still serviceable — get in touch. We’ll talk through your installation and confirm the right combination before you order.
Frequently asked questions
Will my existing KIT X work with the new Divertron 650 X?
Yes. Both the old 1000 X and the new Divertron 650 X use the same 1″ female threaded inlet and are designed for use with the standard DAB KIT X floating suction kit. If your existing kit is in good condition, you can keep using it. If the float, hose or strainer have aged in service, ask us about a replacement KIT X when you order.
Will the new Divertron 650 X fit where my existing 1000 X sat?
Yes, in the vast majority of installations. Both pumps share the same 1″ threaded discharge, the same closed inlet base and a similar physical envelope, so existing pipework, brackets, supports and your KIT X will accept the new model. If your installation is unusual or tightly fitted, send us a couple of photos and measurements and we’ll confirm.
Is performance the same?
For most domestic and garden duties, the new Divertron 650 X covers the same applications as the 1000 X. The new motor is more efficient, delivering comparable real-world performance with lower energy use. If your installation pushed the limits of the 1000 X, get in touch and we’ll recommend the right replacement.
Can I still get spare parts for the 1000 X?
Some service parts may still be available through DAB. Get in touch with the part you need and we’ll check current availability — but for most enquiries, replacement with the new Divertron 650 X is more cost-effective than repair.
How quickly can I get one?
In stock for dispatch within 3–4 working days on standard delivery. Next working day delivery is available for orders placed before 12 noon.
-
technical sheet PDFDownload
-
manual PDFDownload
-
data sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
You may also need
DAB Divertron Pumps offer a 6” multistage submersible pressure booster pump for clean water systems, ideal for rainwater harvesting and irrigation systems. Easy-to-use and install,…
Clarke Garden Hose PGH60 1/2" x 50m pro garden hose 7956002 Heavy duty Garden hose for garden or site use, 50m coil. This tough PVC hose incorporating…
Multi Stepped Hosetail Allows the connection of 12, 19, 25, 32 and 38mm Flexi Hose
Clarke Garden Hose PGH75 3/4" x 30m pro garden hose 7956005 Garden hose for garden or site use, 30m coil. This tough PVC hose incorporating woven polyester…
Related products
The DAB Diver Pumps are a medium pressure submersible pump solution typically used for lifting water from wells and tanks, or for use with sprinklers…
DAB Self-priming centrifugal water pump with excellent suction capacity even when there are air bubbles. Particularly suitable for water supply in domestic installations smallscale agriculture…
4" submersible centrifugal multistage wet end with floating impellers for water supply. Assembled on a motor, pumping of clean water for domestic, industrial, agricultural and…
The DAB JET Pump is a high-performance, self-priming pump specifically designed for domestic applications. Its robust suction capacity makes it ideal for handling a variety…
DAB Self-priming centrifugal water pump with excellent suction capacity even when there are air bubbles. Particularly suitable for water supply in domestic installations smallscale agriculture…
SUPERSEDED Now supplied as the Divertron 900 Order this listing — we’ll send the new energy-efficient Divertron 900 as a direct replacement. DAB Divertron 1200…