Ebara EVMS-K Pumps
Ebara EVMS-K3 24F5 HQ1BEG E/2.2 MT Multistage Pump 28251100245
- Established 1975
- Trusted by thousands of customers
The Ebara EVMS-K3 24F5 HQ1BEG E/2.2 MT is a 24-stage AISI 304 stainless steel vertical multistage pump with a 2.2 kW IE3 motor, an on-board E-SPD+ variable speed inverter and a pressure transducer. It runs from a standard 230 V single-phase supply, holds a constant set pressure as demand changes and delivers very high head at low flow, making it a compact, ready-to-wire choice for high-pressure boosting on sites without three-phase power.
Supplied with DN25 round flange connections, an HQ1BEG balanced cartridge seal rated to 25 bar and EPDM elastomers, for a 230 V single-phase supply.
E-SPD+ inverter
AISI 304 stainless
Round flange DN25
25 bar balanced seal
IP55
39.5 kg
More about this product
Ebara EVMS-K3 24F5 HQ1BEG E/2.2 MT Overview
The EVMS-K3 24F5 MT is the highest-head single-phase model in the EVMS-K3 range, Ebara’s 3 m³/h nominal-flow vertical multistage pump supplied complete with inverter control. The E-SPD+ MT unit is mounted on the motor terminal box and takes a 230 V single-phase supply, converting it to a 230 V three-phase output for the motor. The pressure transducer comes electrically connected. The inverter starts, stops and modulates motor speed to hold the set pressure, giving steadier supply, lower energy use and longer service life than fixed-speed operation.
Hydraulic parts are EN 1.4301 (AISI 304) stainless steel, with a tungsten carbide shaft sleeve bearing. This model is built with the HQ1BEG balanced cartridge seal and 25 bar round flanges as standard. A 2.2 kW IE3 two-pole motor drives it, and the DN25 round flange inlet and outlet sit in-line at the base. With around 177 m of head at shut-off and flows up to 4.5 m³/h, it suits high-rise building boosting, high-pressure washing and process supply, and long or elevated supply mains where three-phase power isn’t available.
Key Features
Technical Specifications
| Specification | Value |
|---|---|
| Ebara part number | 28251100245 |
| Pump model | EVMS-K3 24F5 HQ1BEG E/2.2 MT |
| Pump type | Vertical multistage, 24 stages, 2-pole |
| Nominal flow | 3 m³/h |
| Maximum flow | approx. 4.5 m³/h (75 l/min) |
| Maximum head | approx. 177 m |
| Maximum working pressure | 25 bar |
| Liquid temperature | -30°C to +135°C (pump with inverter; HQ1BEG seal rated to +140°C) |
| Ambient temperature | -10°C to +40°C (up to 1000 m altitude) |
| Connections | Round flange (F), DN25; drain / vent G3/8″ |
| Motor | Ebara ETM 3 80-2,2-2, 2.2 kW (3 HP), IE3, 2875 rpm |
| Motor full load current | 8.2 A at 230 V (three-phase output from inverter) |
| Protection / insulation | IP55 / Class F, PTC sensor fitted |
| Supply | 230 V single phase, 50 Hz (E-SPD+ MT) |
| Height (H / Hi) | 1048 mm / 1003 mm |
| Weight | 39.5 kg |
Performance
Approximate duty points at 50 Hz (full speed), read from the Ebara EVMS(.)-K3 24/2.2 curve (ISO 9906:2012 Grade 3B). The inverter reduces speed to hold the set pressure at lower demand.
| Flow (m³/h) | 0 | 1 | 2 | 3 | 4 | 4.5 |
|---|---|---|---|---|---|---|
| Flow (l/min) | 0 | 17 | 33 | 50 | 67 | 75 |
| Head (m) | 177 | 171 | 161 | 145 | 119 | 100 |
Materials
| Component | Material |
|---|---|
| Impellers, intermediate casings | EN 1.4301 (AISI 304) |
| Bottom casing, casing cover, outer casing | EN 1.4301 (AISI 304) |
| Liner ring | EN 1.4301 (AISI 304) + PPS |
| Shaft | Stainless steel, EN 1.4301 or EN 1.4462 depending on model |
| Shaft sleeve bearing | Tungsten carbide |
| Mechanical seal (HQ1BEG) | Balanced cartridge, SiC / carbon / EPDM, AISI 316 spring |
| O-rings | EPDM |
| Motor bracket | Cast iron |
| Base / coupling | Die-cast aluminium |
| Tie rods | Galvanised steel, class 6.8 |
E-SPD+ MT Inverter
| Specification | Value |
|---|---|
| Input / output | 230 V single phase / 230 V three phase |
| Maximum pump power | 2.2 kW |
| Max current in / out | 20 A / 11 A |
| Output frequency | 50–60 Hz |
| Pressure setpoint | 0.5–25 bar |
| Protection degree | IP55 |
| Ambient temperature | -10°C to +40°C |
| Multi-pump | 2–3 pump pressurisation units |
| Weight | 2.7 kg |
| Directives | 2014/35/EU (LVD), 2014/30/EU (EMC), 2011/65/EU (RoHS II) |
Installation Notes
Frequently Asked Questions
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
DAB multi-stage self-priming centrifugal water pump with excellent suction capacity even when there are air bubbles. Particularly suitable for water supply in domestic installations smallscale…
DAB Active Driver Plus are inverters used for the control of hydraulic pumps.Fields of application are domestic, industrial and agricultural constant pressure pressure pumping systems.…
DAB Euroinox MP stainless steel centrifugal water pump particularly suitable for water supply in domestic installations smallscale agriculture gardening or pressure boosting..
DAB twin AD variable speed booster pump sets specifically suitable for domestic applications and small systems for civil, agricultural or industrial uses.
The Clarke CBM pump. This high efficency multi-stage tankless booster pump has an electronic control unit and combines high output with a massive 48m head.…
Pump sets equipped with Active Driver are designed and built to meet the constant pressure requirements imposed by modern water distribution system technology.
Frequently Asked Questions
Quick answers to common questions about the Ebara EVMS-K3 24F5 HQ1BEG E/2.2 MT Multistage Pump 28251100245. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a water booster pump?
A water booster pump increases the pressure of an existing water supply to give stronger flow at taps, showers and appliances. It can be a small inline pump fitted to the incoming mains, or a larger pump and tank set that draws from a break tank to feed the whole house. Boosters do not create water – they raise the pressure of the water already coming in.
What is the difference between an inline booster and a tank-and-pump booster?
An inline booster connects straight onto the incoming mains and is limited to 12 litres per minute under UK water regulations – examples include the Salamander HomeBoost and WaterBoost WB-Compact. A tank-and-pump booster, such as the Grundfos Home Booster or DAB Esybox with Esytank, draws from a break tank and can deliver much higher flow rates for larger homes with multiple bathrooms.
What is a variable speed booster pump?
A variable speed booster uses an inverter to adjust pump speed in real time to match demand. It maintains constant pressure as outlets open and close, runs more quietly than a fixed-speed pump and typically saves up to 50 per cent of the energy a fixed-speed equivalent would use. The DAB Esybox, DAB Esybox Mini 3 and Grundfos Scala2 are common variable speed examples.