Ebara 3 GPE EVMS 400v
Ebara 3GPE EVMS 10 9N5/4.0 ESPT – 400v – 2009664323
- Established 1975
- Trusted by thousands of customers
The Ebara 3GPE EVMS10 9N5/4.0 ESPT is a three-pump variable speed booster set. Three 9-stage EVMS10 vertical multistage pumps in AISI 304 stainless steel each have their own 4 kW IE3 motor, E-SPD+ inverter and pressure transmitter, mounted on a galvanised steel baseplate with stainless steel suction and discharge manifolds and a protection panel.
The drives hold a constant set pressure as demand changes, from a single pump at low flow up to 45 m³/h with all three running. It runs from a 400 V three-phase supply and connects through G3 threaded suction and discharge manifolds.
E-SPD+ on every pump
AISI 304 stainless
G3 threaded manifolds
IP55
149 kg
More about this product
Ebara 3GPE EVMS10 9N5/4.0 ESPT Overview
The 3GPE EVMS10 9N5/4.0 ESPT is the nine-stage, 4 kW model in Ebara’s three-pump EVMS10 GPE booster range. It carries three 9-stage EVMS10 vertical multistage pumps side by side on a galvanised steel baseplate. Each pump has its own 4 kW IE3 motor, motor-mounted E-SPD+ inverter and pressure transmitter, and its own isolating ball valves and check valve, so any one pump can be valved off for service while the others keep running.
The E-SPD+ drives change pump speed to hold a constant set pressure, bringing pumps in as demand rises and dropping them out as it falls. That gives steadier pressure, lower energy use and less wear than fixed-speed boosting. With all three pumps running the set delivers up to 45 m³/h, with around 99.4 m of head at shut-off. It suits commercial and multi-occupancy buildings, hotels, schools, light industrial sites and irrigation where demand varies through the day and a 400 V three-phase supply is available.
Key Features
What’s on the Frame
| Part | Qty |
|---|---|
| EVMS10-9 vertical multistage pump | 3 |
| 4 kW electric motor | 3 |
| E-SPD+ inverter with adaptor | 3 |
| Pressure transmitter | 3 |
| Suction manifold | 1 |
| Discharge manifold | 1 |
| Threaded female cap | 2 |
| Manifold bracket | 2 |
| Ball valve, suction side | 3 |
| Ball valve, discharge side | 3 |
| Check valve | 3 |
| Ball valve | 2 |
| Pressure gauge | 1 |
| Protection panel and frame | 1 |
| Baseplate | 1 |
| Baseplate feet | 6 |
Technical Specifications
| Specification | Value |
|---|---|
| Ebara part number | 2009664323 |
| Booster set | 3GPE EVMS10 9N5/4,0 ESPT (UK) |
| Pumps | 3 × EVMS10 vertical multistage, 9 stages, 2-pole |
| Flow range per pump | 4.5–15 m³/h |
| Maximum flow, all three pumps | 45 m³/h |
| Head at minimum / maximum flow | 96.8 m / 45.6 m |
| Shut-off head | 973.37 kPa (approx. 99.4 m, 9.7 bar) |
| Maximum working pressure | 1600 kPa (16 bar), PN16 |
| Impeller diameter | 96 mm |
| Suction / discharge | G3 threaded manifolds (UNI ISO 228), threaded female cap on the blank ends, PN16 |
| Motors | 3 × 4 kW, IE3, TEFC, 2-pole, 2875 rpm, frame 112 |
| Protection / insulation | IP55 / Class F |
| Supply | 400 V three phase, 50 Hz (E-SPD+ ESPT) |
| Shaft seal | Cartridge, unbalanced, Q1BEG; rated to 16 bar, −30 to +120 °C |
| Overall size (W × D × H) | 870 × 746 × 1037 mm |
| Weight | 149 kg |
Performance
Duty points at 50 Hz (full speed) with all three pumps running, from the Ebara 3GPE EVMS10 9N5/4,0 curve (ISO 9906:2012 Grade 3B). The 0, 13.5 and 45 m³/h figures are Ebara’s stated values; the others are read from the curve. Each pump gives one third of the set flow at the same head, so with two pumps running the set gives two thirds of the flow shown. The drives reduce speed to hold the set pressure at lower demand.
| Set flow (m³/h) | 0 | 13.5 | 18 | 24 | 30 | 36 | 45 |
|---|---|---|---|---|---|---|---|
| Flow per pump (m³/h) | 0 | 4.5 | 6 | 8 | 10 | 12 | 15 |
| Head (m) | 99.4 | 96.8 | 94.8 | 89.5 | 80.7 | 68.5 | 45.6 |
Materials
| Component | Material |
|---|---|
| Impellers and pump casing | AISI 304 |
| Shaft | AISI 304 |
| Mechanical seal | Silicon carbide rotating face, carbon stationary face, EPDM elastomers, AISI 316 spring |
| O-rings | EPDM |
| Suction and discharge manifolds, end caps | AISI 304 |
| Check valves | Brass / NBR |
| Ball valves | Brass / PTFE |
| Baseplate, manifold brackets and panel frame | Galvanised steel |
| Baseplate feet | SBR |
Installation Notes
Frequently Asked Questions
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
Grundfos JP5 230v male Grundfos JP5 Pumps suits a number of domestic or commercial water supply jobs. Close-coupled centrifugal pumps with built-in ejector system designed…
Grundfos CM-I 304 stainless horizontal multistage pumps The Grundfos CM-I compact booster pump is used for water supply in domestic, commercial and industrial applications. The CM pumps are unique…
Lowara Resiboost Series of Variable Speed Electric Pumps and Pressure Booster Units. The single-phase Resiboost Watercooled variable speed electric pumps are designed for residential applications as they…
The DAB Aquajet Automatic Self Priming Pressure Pump Unit is ideal for domestic civil, agricultural and industrial use. This unit has a cast iron JET…
Grundfos MQ3 – Replaced by Scala1 3-35 pipe modifications required If ordered we will send a Scala1 3-35
Lowara CEAM 70/5-V/A 110v 107330010DAA Lowara CEA-CA series. A wide range of pumps for domestic and industrial applications. Single impeller CEA and dual impeller CA.…
Frequently Asked Questions
Quick answers to common questions about the Ebara 3GPE EVMS 10 9N5/4.0 ESPT – 400v – 2009664323. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a water booster pump?
A water booster pump increases the pressure of an existing water supply to give stronger flow at taps, showers and appliances. It can be a small inline pump fitted to the incoming mains, or a larger pump and tank set that draws from a break tank to feed the whole house. Boosters do not create water – they raise the pressure of the water already coming in.
What is the difference between an inline booster and a tank-and-pump booster?
An inline booster connects straight onto the incoming mains and is limited to 12 litres per minute under UK water regulations – examples include the Salamander HomeBoost and WaterBoost WB-Compact. A tank-and-pump booster, such as the Grundfos Home Booster or DAB Esybox with Esytank, draws from a break tank and can deliver much higher flow rates for larger homes with multiple bathrooms.
What is a variable speed booster pump?
A variable speed booster uses an inverter to adjust pump speed in real time to match demand. It maintains constant pressure as outlets open and close, runs more quietly than a fixed-speed pump and typically saves up to 50 per cent of the energy a fixed-speed equivalent would use. The DAB Esybox, DAB Esybox Mini 3 and Grundfos Scala2 are common variable speed examples.