Ebara 2 GPE MATRIX 400v
Ebara 2GPE MATRIX 5-8T/2.2 ESPT – 400v – 2001708211
- Established 1975
- Trusted by thousands of customers
The Ebara 2GPE MATRIX 5-8T/2.2 ESPT is a two-pump variable speed booster set. Two 8-stage Matrix 5 horizontal multistage pumps in AISI 304 stainless steel each have their own 2.2 kW IE3 motor, E-SPD+ inverter and pressure transmitter, mounted on a galvanised steel baseplate with stainless steel suction and discharge manifolds and a protection panel.
The drives hold a constant set pressure as demand changes, from a single pump at low flow up to 15.6 m³/h with both running. It runs from a 400 V three-phase supply and connects through a G2 suction manifold and a G1½ discharge manifold.
E-SPD+ on every pump
AISI 304 stainless
G2 / G1½ manifolds
IP55
72 kg
More about this product
Ebara 2GPE MATRIX 5-8T/2.2 ESPT Overview
The 2GPE MATRIX 5-8T/2.2 ESPT is the eight-stage, 2.2 kW model in Ebara’s two-pump Matrix 5 GPE booster range. It carries two 8-stage Matrix 5 horizontal multistage pumps side by side on a galvanised steel baseplate. Each pump has its own 2.2 kW IE3 motor, motor-mounted E-SPD+ inverter and pressure transmitter, and its own isolating ball valves and check valve, so either pump can be valved off for service while the other keeps running.
The E-SPD+ drives change pump speed to hold a constant set pressure, bringing pumps in as demand rises and dropping them out as it falls. That gives steadier pressure, lower energy use and less wear than fixed-speed boosting. With both pumps running the set delivers up to 15.6 m³/h, with around 92.1 m of head at shut-off. It suits commercial and multi-occupancy buildings, hotels, schools, light industrial sites and irrigation where demand varies through the day and a 400 V three-phase supply is available.
Key Features
What’s on the Frame
| Part | Qty |
|---|---|
| Matrix 5-8T pump | 2 |
| 2.2 kW electric motor | 2 |
| E-SPD+ inverter with adaptor | 2 |
| Pressure transmitter | 2 |
| Suction manifold | 1 |
| Discharge manifold | 1 |
| Manifold end cap | 2 |
| Union ball valve, suction side | 2 |
| Union ball valve, discharge side | 2 |
| Check valve | 2 |
| Ball valve | 1 |
| Pressure gauge | 1 |
| Protection panel and frame | 1 |
| Baseplate | 1 |
| Baseplate feet | 4 |
Technical Specifications
| Specification | Value |
|---|---|
| Ebara part number | 2001708211 |
| Booster set | 2GPE MATRIX 5-8T/2,2 ESPT (UK) |
| Pumps | 2 × Matrix 5-8T horizontal multistage, 8 stages, 2-pole |
| Flow range per pump | 1.8–7.8 m³/h |
| Maximum flow, both pumps | 15.6 m³/h |
| Head at minimum / maximum flow | 85.9 m / 35.2 m |
| Shut-off head | 901.20 kPa (approx. 92.1 m, 9.0 bar) |
| Maximum working pressure | 1000 kPa (10 bar) |
| Impeller diameter | 97 mm |
| Suction / discharge | G2 suction / G1½ discharge, threaded (UNI ISO 228), PN16 |
| Motors | 2 × 2.2 kW, IE3, TEFC, 2-pole, 2850 rpm |
| Motor current | 4.7 A per motor at 400 V |
| Protection / insulation | IP55 / Class F |
| Supply | 400 V three phase, 50 Hz (E-SPD+ ESPT) |
| Overall size (W × D × H) | 570 × 825 × 535 mm |
| Weight | 72 kg |
Performance
Duty points at 50 Hz (full speed) with both pumps running, from the Ebara 2GPE MATRIX 5-8T/2,2 curve (ISO 9906:2012 Grade 3B). The 0, 3.6 and 15.6 m³/h figures are Ebara’s stated values; the others are read from the curve. Each pump gives half of the set flow at the same head, so with one pump running the set gives half the flow shown. The drives reduce speed to hold the set pressure at lower demand.
| Set flow (m³/h) | 0 | 3.6 | 6 | 9 | 12 | 14 | 15.6 |
|---|---|---|---|---|---|---|---|
| Flow per pump (m³/h) | 0 | 1.8 | 3 | 4.5 | 6 | 7 | 7.8 |
| Head (m) | 92.1 | 85.9 | 80.5 | 71.5 | 58.5 | 47 | 35.2 |
Materials
| Component | Material |
|---|---|
| Impellers, pump casing, external pump casing | AISI 304 |
| Shaft | AISI 304 |
| Mechanical seal | Carbon rotary / ceramic stationary faces, EPDM gasket and bellows, EN 1.4402 (AISI 316) spring, frame and retainer |
| O-rings | EPDM |
| Suction and discharge manifolds | AISI 304 |
| Check valves | Brass / NBR |
| Ball valves | Brass / PTFE |
| Baseplate and panel frame | Galvanised steel |
Installation Notes
Frequently Asked Questions
-
Data Sheet PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
Grundfos CM-I 304 stainless horizontal multistage pumps The Grundfos CM-I compact booster pump is used for water supply in domestic, commercial and industrial applications. The CM pumps are unique…
Grundfos MQ3 – Replaced by Scala1 3-35 pipe modifications required If ordered we will send a Scala1 3-35
This DAB Aquajet Inox Automatic Self Priming Pressure Pump Unit is ideal for domestic, civil, agricultural and industrial use. With an automatic water lifting unit, stainless…
DAB Active Driver Plus are inverters used for the control of hydraulic pumps.Fields of application are domestic, industrial and agricultural constant pressure pressure pumping systems.…
Designed to address the increasing challenge of low mains water pressure, the newly extended STORMBOOST lineup is fully WRAS Approved and now includes six innovative models: STORMBOOST 60, 80,…
Pump sets equipped with Active Driver are designed and built to meet the constant pressure requirements imposed by modern water distribution system technology.
Frequently Asked Questions
Quick answers to common questions about the Ebara 2GPE MATRIX 5-8T/2.2 ESPT – 400v – 2001708211. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a water booster pump?
A water booster pump increases the pressure of an existing water supply to give stronger flow at taps, showers and appliances. It can be a small inline pump fitted to the incoming mains, or a larger pump and tank set that draws from a break tank to feed the whole house. Boosters do not create water – they raise the pressure of the water already coming in.
What is the difference between an inline booster and a tank-and-pump booster?
An inline booster connects straight onto the incoming mains and is limited to 12 litres per minute under UK water regulations – examples include the Salamander HomeBoost and WaterBoost WB-Compact. A tank-and-pump booster, such as the Grundfos Home Booster or DAB Esybox with Esytank, draws from a break tank and can deliver much higher flow rates for larger homes with multiple bathrooms.
What is a variable speed booster pump?
A variable speed booster uses an inverter to adjust pump speed in real time to match demand. It maintains constant pressure as outlets open and close, runs more quietly than a fixed-speed pump and typically saves up to 50 per cent of the energy a fixed-speed equivalent would use. The DAB Esybox, DAB Esybox Mini 3 and Grundfos Scala2 are common variable speed examples.