DAB Feka/Fekafos Pumps
Feka VS 750 M-NA manual 230v
- Established 1975
- Trusted by thousands of customers
DAB Feka VS 750 M-NA submersible sewage pump, 220-240 V single-phase
Submersible centrifugal pumps made of stainless steel with vortex impeller made of microcast steel. They are suitable for lifting sewage water and in general waste water containing solids with a maximum diameter of 50 mm.
More about this product
Overview
Submersible centrifugal pumps made of stainless steel with vortex impeller made of microcast steel. They are suitable for lifting sewage water and in general waste water containing solids with a maximum diameter of 50 mm. Insulating rubber covered handle. AISI 316 stainless steel motor shaft. They have double mechanical seal with interposed oil chamber (non-toxic oil) in carbon-alumina on the motor side, and silicon carbide/silicon carbide on the pump side. The seal cover, motor casing, pump body, cover and handle are made of stainless steel. They are fitted with dry, asynchronous and waterproof motor, cooled by the pumped liquid. Rotor running on permanently lubricated ball bearings, oversized and selected to ensure low noise and durability. Thermal-overload protection provided as standard for the single-phase version, while for the three-phase version it is the responsibility of the user. Permanently connected capacitor in the single-phase version. Construction according to CEI 2-3 / CEI 61-69 (EN 60335-2-41). The maximum ambient temperature for using Feka VS is +40°C with the motor above water. Continuous service with liquid temperature +35°C and completely submerged pump.
Specification
| Model | DAB Feka VS 750 M-NA |
|---|---|
| Supply | 220-240 V single-phase, 50 Hz |
| Operation | Manual (no float switch) |
| Rated power P2 | 0.75 kW (1 HP) |
| Max. power input P1 | 1111 W |
| Current In | 5.13 A |
| Starting current | 20 A |
| Capacitor | 20 µF |
| Max. head (zero flow) | 9.6 m |
| Head at max. listed flow | 1.9 m at 400 l/min |
| Free passage | 50 mm |
| Delivery | 2″ female thread |
| Max. immersion depth | 7 m |
| Liquid temperature | 0 to +35 °C domestic use (EN 60335-2-41), 0 to +50 °C other uses |
| Max. starts per hour | 20 |
| Protection | IP 68 |
| Power cable | 10 m H07RN-F |
Feka VS range
| Pumped liquid | Sewage and waste water in general, non-aggressive |
|---|---|
| Impeller | Vortex, AISI 304 microcast steel |
| Max. ambient temperature | +40 °C (motor above water) |
| Insulation class | F |
| Poles | 2 |
| Installation | Fixed or portable, vertical |
Applications
- Sewage
- Rainwater harvesting
-
data sheet PDFDownload
-
technical PDFDownload
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
ABS Robusta 200TS 230v auto/manual The Robusta 200 and 300 series have been designed for internal or external applications such as emptying containers and drainage…
The Clarke PSD1A stainless steel pump designed to clear water from ponds and pools. Suitable for operating waterfalls, fountains, irrigating gardens and draining cellars. Includes a…
The Clarke PVP11A stainless steel pump ideal for heavy duty draining applications including pits, sumps, ditches, fottings etc. It can be used to remove both…
DOMO series, stainless steel electric pumps, are available with twin-channel or vortex impeller (DOMO VX). Designed to handle suspended solids up to 50mm in diameter…
The AP series of Grundfos drainage pumps are designed for temporary and portable installations, but can also be installed on a permanent free-standing basis. The…
Lowara DOC Pumps Submersible pumps for drainage, infiltration water and emptying of pools, ponds, tanks and reservoirs. The DOC pump is mainly made of stainless…
Frequently Asked Questions
Quick answers to common questions about the Feka VS 750 M-NA manual 230v. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.