EVAK puddle sucker pumps
EVAK puddle sucker pumps RESIDOX 400 – 110V
- Established 1975
- Trusted by thousands of customers
The Evak Residox 400 (110V) is a stainless steel manual puddle sucker pump that clears standing water down to just 1mm – far lower than a standard submersible pump can reach. Ideal for flood recovery, basement clearance and site drainage. No priming required.
- Stainless steel case, cast iron housing, Hytrel vortex impeller
- Manual operation, no priming required
- 110V, suited to site use via a transformer
More about this product
Overview
The Evak Residox 400 (110V) is a manual puddle sucker / residue drainage pump built to clear standing water right down to floor level – approximately 1mm – where conventional submersible pumps simply stop drawing. Its rubberised suction base sits flush to flat surfaces without damaging tiles or finished concrete, making it a reliable choice for emergency flood response, basement clearance, site drainage and general nuisance water removal. This 110V model suits site use via a transformer. No priming is required: place it in the water and switch on.
Key Features
Performance at a Glance
Technical Specification
| Voltage | 110V |
| Motor rating | 400W (0.5HP), 2850 RPM |
| Current draw | 6A |
| Max flow | 250 litres/min |
| Max head | 11 metres |
| Discharge | 2″ hosetail |
| Seal | Double mechanical seal, SIC/SIC, oil chamber |
| Cable | 10m H07RN-F |
| Housing materials | FC20 cast iron pump housing, ADC12 alloy motor housing/seal casing |
| Weight | 12kg |
| Warranty | 12 months |
Applications
Emergency flood recovery, basement and cellar clearance, site drainage, public works, and removing residual water that standard submersible pumps leave behind. Suitable for continuous running and for hire fleet use.
FAQs
No – the Residox 400 requires no priming. Simply place it in the water and switch on.
110V is the standard site-safety voltage, run via a transformer – suited to construction sites and hire fleet use rather than domestic mains.
No – this is the manual variant, giving the operator full control over on/off operation. An automatic sensor version is available separately (230V only).
Yes – the Hytrel vortex impeller is highly abrasion resistant and copes with sand and grit.
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Related products
Submersible pumps specifically designed for uses in narrow pits with dimensions down to 20 cm x 20 cm. Suitable to pump clear water containing particles…
The Clarke PSD1A stainless steel pump designed to clear water from ponds and pools. Suitable for operating waterfalls, fountains, irrigating gardens and draining cellars. Includes a…
The Lowara Domo GRI is a compact, high-performance submerisble grinder. The heavy duty cutting device makes it excellent for pumping waste water in residential, commerical…
Lowara DIWA pumps Submersible pumps for dirty water manufactured in AISI 304 stainless steel. Four basic models with 0.55 (0.75 HP) to 1.5 kW (2HP) rated power.…
Submersible sewage pump with a 40mm solids handling capacity. Cast iron construction suitable for pumping light domestic waste effluent septic tanks and large basements/cellars.
The Goliath Super is a robust sump pump made of stainless steel plate and fibre-reinforced plastic, resistance to corrosion. It also features a vortex impeller…
Frequently Asked Questions
Quick answers to common questions about the EVAK puddle sucker pumps RESIDOX 400 – 110V. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.