Evak Agivort 5.10 0.75kW 2" Slurry Pump 230V

Name: Evak Agivort 5.10 0.75kW 2" Slurry Pump 230V
Brand: EVAK
SKU: evakAgivort5.10230
Price: 536.4 GBP
Availability: InStock

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

The Evak Agivort 5.10 (230V) is the mid-size single-phase pump in the Agivort slurry range — the one most hire fleets and contractors standardise on. 0.75 kW / 1 HP motor, 2″ discharge, FC200 cast iron pump body with 316 stainless steel agitator and vortex impeller. Same portable build as the 5.05 with half as much flow again and 12.5 m of head.

Built for water other pumps can’t shift — sludge, slurry, sediment-laden site water. The agitator stirs settled solids back into suspension and the vortex impeller passes them through without clogging. Internal capacitor, auto float switch included, 10 m cable.

0.75 kW

Motor output

460 L/min

Max flow

12.5 m

Max head

316 SS

Agitator

230V single-phase
Auto float switch
316 SS agitator
Vortex impeller
Double mechanical seal
Hire-fleet grade

Mid-range Agivort — 1 HP, 230V auto. Also available as the Agivort 5.10 400V three-phase manual. For a lighter portable unit see the Agivort 5.05 (0.37 kW); for more flow and head see the 5.20 (1.5 kW). For sewage with large solids see the Evak Hippo range; for silty site water without heavy sludge see the Trenchman range.

Full Description

More about this product

Full Description

The Evak Agivort 5.10 (230V) is the mid-size single-phase pump in the Agivort submersible slurry range — the model most hire fleets and groundworks contractors standardise on. It keeps the compact, portable build of the 5.05 but steps the motor up to 0.75 kW / 1 HP, giving 460 L/min and 12.5 m of head: enough to clear a flooded excavation or empty a settlement tank at a working pace rather than a trickle.

The Agivort name comes from Agitator + Vortex — the two features that define the pump. Solids in slurry settle and pack down at the bottom of a sump or excavation, and a standard sewage pump takes the clear water off the top and leaves the sludge behind. The Agivort’s 316 stainless steel agitator stirs that settled material back into suspension, and the vortex impeller passes it through without clogging, so the pump keeps shifting solids long after a standard pump would have stalled.

The pump body is FC200 cast iron with a heavy-grade 304 stainless steel motor housing. Motor cover and handle are Nylon 6 — the lightweight build shared with the 5.05; the 5.20 and 5.50 step up to a cast iron motor cover and stainless handle. Double mechanical seal in an oil chamber with an NBR oil seal, internal capacitor so no external starter box is needed, integrated float switch and 10 m H07RN-F cable. At 18 kg it’s still a one-person lift.

Key features

0.75 kW

Motor output

1 HP

Horsepower

5.4 A

FLA @ 230V

2″

Discharge

460 L/min

Max flow

12.5 m

Max head

18 kg

Weight

Construction

316 stainless steel agitator

The defining feature. Rotates below the impeller to stir settled sludge back into suspension — keeps solids moving so the pump keeps pumping.

Vortex impeller

Non-clogging vortex design pairs with the agitator to pass agitated slurry through the pump without blocking.

FC200 cast iron pump body

Heavy-duty FC200 cast iron casing and impeller for long service life in abrasive slurry.

304 stainless motor housing

Heavy-grade 304 stainless steel motor housing and stainless shaft. Nylon 6 motor cover and handle keep the weight down for portable use.

Double mechanical seal

Two mechanical seals in an oil chamber with an NBR oil seal — the hard-wearing arrangement abrasive duty needs.

Auto float switch & internal capacitor

Integrated pendant float for unattended sump duty, and the start capacitor is built into the motor — plug in and go, no separate control box.

Applications

Construction site dewatering

Excavations, footings and site sumps with sediment-laden water — enough flow to keep ahead of ingress, with the agitator keeping solids moving.

Slurry & sludge pumping

Slurry, sludge and heavily suspended-solid water where clean-water pumps quickly fail.

Settlement tank & lagoon cleaning

Settlement tanks, sediment traps and lagoons where sludge needs stirring and evacuating — 12.5 m head lifts out of deeper chambers.

Hire fleets

The standard slurry pump for tool-hire operators serving construction and civils — 230V, 18 kg, plug and go.

Utilities & civils

Chamber pumping, sump clearance and sediment evacuation on utility maintenance work.

Maximum liquid temperature 40 °C. Auto float switch operation. Not for potable water, sewage with large solids (see Hippo range) or corrosive fluids (see Stainox range). Three-phase site? See the Agivort 5.10 400V manual. For more flow and head see the Agivort 5.20 (1.5 kW, 650 L/min, 18 m). For silty trench water without heavy sludge see the Evak Trenchman range.

Technical specifications

Model	Evak Agivort 5.10 (230V)
Series	Evak Agivort — cast iron submersible slurry pump with agitator
Voltage / phase	230V single-phase, 50 Hz
Motor output	0.75 kW (1 HP)
Full load current	5.4 A
Starting	Internal capacitor
Poles / speed	2 pole / 2850 rpm
Operation	Auto (pendant float switch)
Discharge	50 mm (2″)
Max head	12.5 m
Max flow rate	460 L/min
Max liquid temperature	40 °C
Thermal protection	Auto-reset thermal protector
Impeller	Vortex, cast iron
Agitator	316 stainless steel, below impeller
Pump casing	FC200 cast iron
Motor housing / shaft	304 stainless steel
Motor cover / handle	Nylon 6
Mechanical seal	Double mechanical, oil chamber with NBR oil seal
Cable	H07RN-F, 10 m
Dimensions (W × L × H)	228 × 150 × 487 mm
Weight (without cable)	18 kg

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.

Frequently Asked Questions

Quick answers to common questions about the Evak Agivort 5.10 0.75kW 2″ Slurry Pump 230V. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What is a submersible pump?

A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.

Can submersible pumps handle solids and sewage?

Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.

When should I use a submersible pump instead of a surface pump?

Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.