Grundfos TPE2 D 50-60-N 230v 0-0.6 bar 98438566

Name: Grundfos TPE2 D 50-60-N 230v 0-0.6 bar 98438566
Brand: Grundfos
SKU: 98438566
Price: 4507.14 GBP
Availability: InStock

Grundfos TPE2 D 50-60-N 230v 0-0.6 bar 98438566 - Image 2

In stock

Any questions? Message us on WhatsApp

Established 1975
Trusted by thousands of customers

Grundfos TPE2 D 50-60-N cast iron 230V twin-head in-line pump

Single-stage, close-coupled twin-head volute pump with in-line suction and discharge ports of identical diameter. Both heads are driven by IE5 permanent-magnet motors with integrated frequency converters and PI controllers, and run in duty/standby or duty-assist as the system demands.

DN 50

Connection

0.37 kW

Motor

1 x 230V

Supply

IE5

Efficiency

Top-pull-out design: the power head lifts out for service with the housing left in the pipework. Shaft seal to EN 12756, DIN flanged connections to EN 1092-2.

Requires a DPI differential-pressure transducer for closed-loop control — the 0-0.6 bar kit (part 96611522) suits this duty. Sold separately.

Full Description

More about this product

Full Description

Applications

Heating and district heating systems
Air conditioning and chilled water systems
Industrial process and cooling circuits
Ground-source heat pump systems
Pressure boosting and general water transfer
Solar thermal systems

Specification

Model	TPE2 D 50-60-N
Grundfos type key	TPE2 D 50-60 N-A-F-A-BQQE-DYB
Configuration	Twin head
Nominal connection	DN 50, DIN flanges to EN 1092-2
Rated motor power (P2)	0.37 kW per head
Supply voltage	1 x 200-240V, 50/60 Hz
Motor	Permanent-magnet synchronous, fan-cooled, IE5 to IEC 60034-30-2
Speed control	Integrated frequency converter and PI controller
Pump housing	Cast iron EN-GJL-250
Shaft seal	BQQE, to EN 12756
Liquid temperature	-25 °C to +120 °C
Design	Top-pull-out, in-line

Key features

IE5 permanent-magnet motor

Exceeds the IE5 threshold of IEC 60034-30-2, so running cost is materially lower than an equivalent fixed-speed induction unit.

Integrated control

The frequency converter and PI controller sit in the terminal box — no external drive panel, no separate control wiring.

Top-pull-out servicing

The motor, pump head and impeller lift out as one assembly while the housing stays in the pipework.

Duty and standby built in

The two heads alternate automatically and the standby head starts on fault or on peak demand, without an external controller.

Sensor options

TPE2 pumps are supplied without a differential-pressure transducer. Where closed-loop control is required, add the DPI kit that matches the duty:

0-0.6 bar DPI kit	96611522
0-1 bar DPI kit	96611523
0-1.6 bar DPI kit	96611524
0-2.5 bar DPI kit	96611525
0-4.0 bar DPI kit	96611526

Frequently asked questions

Is a pressure transducer included?

The 0-0.6 bar DPI kit, part 96611522, matches this pump’s duty range. It is an optional extra and is not included in the pump price.

Can this pump run without a sensor?

Yes. In constant-curve or constant-speed mode the pump runs from a setpoint entered at the control panel or through Grundfos GO. A transducer is only needed for proportional or constant-pressure closed-loop control.

Is this the single-head or twin-head version?

Twin head. The single-head equivalent is the TPE2 50-60, which we list separately.

What supply does it need?

1 x 200-240V, 50/60 Hz. We list the single-phase and three-phase versions as separate products, so check the voltage before ordering.

Downloads

Data Sheet PDF
Download

Delivery Information

Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.

Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).

Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.

Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.

Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.

Frequently Asked Questions

Quick answers to common questions about the Grundfos TPE2 D 50-60-N 230v 0-0.6 bar 98438566. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.

What types of Grundfos pumps are available?

Grundfos offers circulators, booster pumps, borehole pumps, drainage pumps and other solutions for domestic and commercial systems.

How do I identify the correct Grundfos pump model?

Use the model name and product number on the pump nameplate, then check the electrical, hydraulic and connection specifications.

Can a Grundfos pump improve household water pressure?

A suitably selected Grundfos booster system can improve water pressure or flow, subject to the property’s water supply and installation requirements.