Wilo CronoBloc-BL-E
Wilo CronoBloc-BL-E40/110-1.5/2 2191372
- Established 1975
- Trusted by thousands of customers
Wilo CronoBloc-BL-E 40/110-1,5/2 monobloc pump, 400 V three-phase
Electronically controlled glanded single pump in monobloc design with flange connection and automatic power adjustment.
1.5 kW motor. DN 65 suction connection.
More about this product
Overview
Electronically controlled glanded single pump in monobloc design with flange connection and automatic power adjustment.
Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port, mechanical seal, flange connection with pressure measuring connection R 1/8, lantern, coupling and drive with integrated electronic speed control.
Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.
Specification
| Model | Wilo CronoBloc-BL-E 40/110-1,5/2 |
|---|---|
| Part number | 2191372 |
| Series | CronoBloc-BL-E |
| Supply | 380 V three-phase, 50/60 Hz / 400 V three-phase, 50/60 Hz / 440 V three-phase, 50/60 Hz |
| Rated power P2 | 1.5 kW |
| Max. operating pressure | 16 bar (120 °C) |
| Permissible temperature range | -20 °C to +140 °C |
| Motor efficiency class | IE4 |
| Protection class | IP55 |
| Motor protection | PTC thermistor sensor with trip electronics |
Materials
| Pump housing | EN-GJL-250 |
|---|---|
| Lantern | EN-GJL-250 |
| Impeller | EN-GJL-200 |
| Shaft | 1.4122 |
| Mechanical seal | AQEGG |
Dimensions and weight
| Pipe connection, suction | DN 65 |
|---|---|
| Gross weight (packed) | 55.1 kg |
Features and equipment
Special features/product advantages
- Energy savings due to integrated electronic power adjustment
- Optional interfaces for bus communication using plug-in IF-Modules
- Simple operation due to tried-and-tested Green Button Technology and display
- Integrated full motor protection (PTC thermistor sensor) with trip electronics
- Performance and main dimensions in accordance with EN 733
Operating modes
- Δp-c for constant differential pressure
- Δp-v for variable differential pressure
- PID control
- Control mode (n = constant)
Manual functions
- Differential pressure setpoint setting
- Setting the speed (manual control mode)
- Setting the operating mode
- Setting the pump ON/OFF
- Configuration of all operating parameters
- Fault acknowledgement
External control functions
- “Overriding Off” control input
- Analogue input 0 – 10 V, 0 – 20 mA for constant speed (DDC) and remote setpoint adjustment
- Analogue input 2 – 10 V, 4 – 20 mA for constant speed (DDC) and remote setpoint adjustment
- Analogue input 0 – 10 V for actual value signal from pressure sensor
- Analogue input 2 – 10 V, 0 – 20 mA, 4 – 20 mA for actual value signal from pressure sensor
Signal and display functions
- Collective fault signal SSM
- Collective run signal SBM
Data exchange
- Infrared interface for wireless data exchange with IR-Monitor/IR-Stick
- Plug-in position for Wilo IF-Modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation
Safety functions
- Full motor protection with integrated trip electronics
- Access disable
Dual pump management (2 x single pump; Y-piece application only)
- Main/standby operation (automatic fault-actuated switchover)
- Pump cycling main/standby operation after 24 hours
- Parallel operation
Scope of delivery
- Pump
- Installation and operating instructions
Frequently asked questions
Standard delivery:
Standard delivery is free on most orders. Some items may incur a delivery charge depending on weight, size or value. Any applicable charge will be displayed at checkout.
Deliveries will typically be made between 7am and 6pm, Monday to Friday (excluding public holidays).
Next day delivery:
Next working day delivery is available for a £16.50 + VAT delivery charge.
Orders must be placed before 12 noon to qualify for next working day delivery. Orders placed after 12 noon on Thursday but before noon on Friday will be delivered the following Monday. Orders placed after 12 noon on Friday will be delivered on Tuesday.
Pallet/Large/Difficult items:
Some large, heavy or difficult to transport items may incur an additional delivery charge. Please contact us for a delivery quote before ordering.
Frequently Asked Questions
Quick answers to common questions about the Wilo CronoBloc-BL-E40/110-1.5/2 2191372. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What are centrifugal pumps used for?
Centrifugal pumps use a rotating impeller to move liquids and are commonly used for water transfer, circulation and industrial processes.
How do I choose a centrifugal pump?
Compare the required flow rate, total head, liquid characteristics and electrical supply with each pump’s performance curve.
Are centrifugal pumps suitable for dirty water?
Some are designed for clean water only, while others handle solids or wastewater. Check the particular pump’s permitted liquid and solids specification.
What types of Wilo pumps are available?
Wilo manufactures circulators and other pumping solutions for heating, cooling, water supply and building services applications.
What is a Wilo circulator pump used for?
A Wilo circulator moves water around a heating or cooling circuit to maintain the required flow through the system.
How do I select a replacement Wilo pump?
Match the existing model or confirm head, flow, installation length, connections, voltage and control requirements before ordering.
