Pedrollo MC4 4-Pole Double-Channel Sewage Pumps
The Pedrollo MC4 is a heavy-duty 4-pole submersible double-channel sewage pump (1,450 rpm) in thick cast iron, for liquids containing suspended solids and short fibres, sewage, sludge-mixed water, groundwater and surface water. Seven three-phase models deliver up to 5,000 l/min and up to 26 m head, with motors from 3 to 15 kW.
Cast iron pump body and two-channel impeller with cataphoresis treatment, AISI 431 shaft and a double mechanical seal with an oil chamber. The MC4 40 to 55/55 pass solids up to Ø 55 mm with DN80 flanged delivery; the MC4 100 to 200/80 pass solids up to Ø 80 mm with DN100 flanged delivery. 10 m cable, built-in thermal protection, installation to 10 m depth.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| MC4 40/55 | 2302760 | Three Phase | 3 kW / 4 HP | 400–2400 l/min | 10–3.6 m |
| MC4 50/55 | 2302770 | Three Phase | 3.7 kW / 5 HP | 400–2700 l/min | 12.6–4.8 m |
| MC4 55/55 | 2302780 | Three Phase | 4 kW / 5.5 HP | 400–2900 l/min | 14–5.3 m |
| MC4 100/80 | 2302790 | Three Phase | 7.5 kW / 10 HP | 800–4250 l/min | 17–7 m |
| MC4 125/80 | 2302800 | Three Phase | 9.2 kW / 12.5 HP | 800–4500 l/min | 19–8 m |
| MC4 150/80 | 2302810 | Three Phase | 11 kW / 15 HP | 800–4750 l/min | 21–9.5 m |
| MC4 200/80 | 2302820 | Three Phase | 15 kW / 20 HP | 800–5000 l/min | 26–12.5 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
7 products
The Pedrollo MC4 40/55 is a 3 kW (4 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC4 50/55 is a 3.7 kW (5 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC4 55/55 is a 4 kW (5.5 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC4 100/80 is a 7.5 kW (10 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC4 125/80 is a 9.2 kW (12.5 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC4 150/80 is a 11 kW (15 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
The Pedrollo MC4 200/80 is a 15 kW (20 HP) 4-pole submersible double-channel pump for sewage on a 400 V three-phase supply, delivering up to…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo MC4 4-Pole Double-Channel Sewage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.