Pedrollo DC Cast Iron Submersible Drainage Pumps
The Pedrollo DC is a cast iron submersible drainage pump. It drains clear and slightly dirty water in civil and industrial settings. Five models, two single-phase and three three-phase, deliver up to 550 l/min and up to 38 m head.
Thick cast iron gives robustness, abrasion resistance and long life. The DC suits automated fixed installations and runs continuously, even when not fully submerged. Single-phase DCm models include a float switch and switch box.
| Model | Code | Supply | Power | Flow | Head |
|---|---|---|---|---|---|
| DCm 42 | 2301170 | Single Phase | 1.5 kW / 2 HP | 25–500 l/min | 30.5–3 m |
| DCm 43 | 2301180 | Single Phase | 2.2 kW / 3 HP | 25–550 l/min | 35–4 m |
| DC 42 | 2301230 | Three Phase | 1.5 kW / 2 HP | 25–500 l/min | 30.5–3 m |
| DC 43 | 2301240 | Three Phase | 2.2 kW / 3 HP | 25–550 l/min | 35–4 m |
| DC 44 | 2301250 | Three Phase | 3 kW / 4 HP | 25–550 l/min | 37.5–7.5 m |
Head shown as the working range from minimum to maximum flow. Performance to Pedrollo 50 Hz data.
5 products
The Pedrollo DCm 42 is a cast iron submersible drainage pump. It has a 1.5 kW (2 HP) motor on a 230 V single-phase supply.…
The Pedrollo DCm 43 is a cast iron submersible drainage pump. It has a 2.2 kW (3 HP) motor on a 230 V single-phase supply.…
The Pedrollo DC 42 is a cast iron submersible drainage pump. It has a 1.5 kW (2 HP) motor on a 400 V three-phase supply.…
The Pedrollo DC 43 is a cast iron submersible drainage pump. It has a 2.2 kW (3 HP) motor on a 400 V three-phase supply.…
The Pedrollo DC 44 is a cast iron submersible drainage pump. It has a 3 kW (4 HP) motor on a 400 V three-phase supply.…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo DC Cast Iron Submersible Drainage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.