Pedrollo 6SR-HYD 6-Inch Borehole Pump Ends
The Pedrollo 6SR-HYD is a 6″ submersible borehole pump end for clean water, supplied without a motor. 46 models across 5 hydraulic sizes deliver up to 1000 l/min and up to 371 m head, for three-phase 6″ motors from 4 to 30 kW. It suits industrial, civil and agricultural use, including pressure tanks, irrigation, pressure boosting and fire-fighting systems.
Noryl™ impellers with a sand-resistant elastomer coating and chromium-oxide-coated AISI 316L bearings handle up to 100 g/m³ of sand. AISI 304 external sleeve, check valve, diffuser boxes, shaft, filter and cable sheath, with a cast iron delivery port and NEMA motor bracket. 3″ delivery, for wells 6″ (153 mm) wide or more.
| Hydraulic size | Models | Motor range | Flow | Head | Delivery |
|---|---|---|---|---|---|
| 6SR 12 | 7 | 4–15 kW | 50–330 l/min | up to 371 m | 3″ |
| 6SR 18 | 9 | 4–22 kW | 50–450 l/min | up to 350 m | 3″ |
| 6SR 27 | 10 | 4–30 kW | 100–600 l/min | up to 356 m | 3″ |
| 6SR 36 | 10 | 4–22 kW | 100–800 l/min | up to 257 m | 3″ |
| 6SR 44 | 10 | 4–30 kW | 200–1000 l/min | up to 267 m | 3″ |
Maximum head at the minimum flow of each range. Performance to Pedrollo 50 Hz data. Pump ends only, without motors.
Showing 1–30 of 46 products
The Pedrollo 6SR 12/8 HYD is a 6″ submersible borehole pump end for a 4 kW (5.5 HP) motor, delivering up to 330 l/min and…
The Pedrollo 6SR 12/11 HYD is a 6″ submersible borehole pump end for a 5.5 kW (7.5 HP) motor, delivering up to 330 l/min and…
The Pedrollo 6SR 12/15 HYD is a 6″ submersible borehole pump end for a 7.5 kW (10 HP) motor, delivering up to 330 l/min and…
The Pedrollo 6SR 12/18 HYD is a 6″ submersible borehole pump end for a 9.2 kW (12.5 HP) motor, delivering up to 330 l/min and…
The Pedrollo 6SR 12/21 HYD is a 6″ submersible borehole pump end for a 11 kW (15 HP) motor, delivering up to 330 l/min and…
The Pedrollo 6SR 12/25 HYD is a 6″ submersible borehole pump end for a 13 kW (17.5 HP) motor, delivering up to 330 l/min and…
The Pedrollo 6SR 12/28 HYD is a 6″ submersible borehole pump end for a 15 kW (20 HP) motor, delivering up to 330 l/min and…
The Pedrollo 6SR 18/4 HYD is a 6″ submersible borehole pump end for a 4 kW (5.5 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/6 HYD is a 6″ submersible borehole pump end for a 5.5 kW (7.5 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/9 HYD is a 6″ submersible borehole pump end for a 7.5 kW (10 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/11 HYD is a 6″ submersible borehole pump end for a 9.2 kW (12.5 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/13 HYD is a 6″ submersible borehole pump end for a 11 kW (15 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/15 HYD is a 6″ submersible borehole pump end for a 13 kW (17.5 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/18 HYD is a 6″ submersible borehole pump end for a 15 kW (20 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/22 HYD is a 6″ submersible borehole pump end for a 18.5 kW (25 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 18/26 HYD is a 6″ submersible borehole pump end for a 22 kW (30 HP) motor, delivering up to 450 l/min and…
The Pedrollo 6SR 27/4 HYD is a 6″ submersible borehole pump end for a 4 kW (5.5 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/5 HYD is a 6″ submersible borehole pump end for a 5.5 kW (7.5 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/7 HYD is a 6″ submersible borehole pump end for a 7.5 kW (10 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/8 HYD is a 6″ submersible borehole pump end for a 9.2 kW (12.5 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/10 HYD is a 6″ submersible borehole pump end for a 11 kW (15 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/12 HYD is a 6″ submersible borehole pump end for a 13 kW (17.5 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/14 HYD is a 6″ submersible borehole pump end for a 15 kW (20 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/17 HYD is a 6″ submersible borehole pump end for a 18.5 kW (25 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/20 HYD is a 6″ submersible borehole pump end for a 22 kW (30 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 27/27 HYD is a 6″ submersible borehole pump end for a 30 kW (40 HP) motor, delivering up to 600 l/min and…
The Pedrollo 6SR 36/4 HYD is a 6″ submersible borehole pump end for a 4 kW (5.5 HP) motor, delivering up to 800 l/min and…
The Pedrollo 6SR 36/5 HYD is a 6″ submersible borehole pump end for a 5.5 kW (7.5 HP) motor, delivering up to 800 l/min and…
The Pedrollo 6SR 36/6 HYD is a 6″ submersible borehole pump end for a 5.5 kW (7.5 HP) motor, delivering up to 800 l/min and…
The Pedrollo 6SR 36/7 HYD is a 6″ submersible borehole pump end for a 7.5 kW (10 HP) motor, delivering up to 800 l/min and…
Frequently Asked Questions
Quick answers to common questions about the Pedrollo 6SR-HYD 6-Inch Borehole Pump Ends. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.