JST SV Sewage Pumps
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller, lower motor bearing/seal housing and motor top cover, while the shaft and motor casing are manufactured from stainless steel. Twin mechanical seals, carbon ceramic and silicon carbide in a lubricated chamber.
Supplied complete with 10 metres of power cable.
Hose tails aren't supplied with the following versions:-
JST-22 (2 and 4 Pole), JST-37, JST-55, JST-75
Solids Handling
- 36mm JST-4 SV, JST-8 SV
- 46mm JST 15 SV
- 65mm JST-22 SV (2 and 4 pole)
- 57mm JST-37 SV
- 80mm JST-55 SV, JST-75 SV
12 products
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
4" Outlet, Guide rail set for all "C" type JS Pumps. Fixed duck foot is bolted to the sump bottom and guide rail bracket is…
2″ Outlet, Guide rail set for all “C” type JS Pumps and all JS Grinder Pumps. Fixed duck foot is bolted to the sump bottom…
3" Outlet, Guide rail set for all "C" type JS Pumps. Fixed duck foot is bolted to the sump bottom and guide rail bracket is…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
JST SV submersible sewage vortex pumps allow soft solids to pass through the pump body to waste. They feature a cast iron pump body, impeller,…
Frequently Asked Questions
Quick answers to common questions about the JST SV Sewage Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.