Clarke Flood Kit
The Clarke Flood Kit PSV5A is ideal for heavy duty draining applications in emergency situations including gardens, cellars, sumps, ditches, footings etc. It can be used to remove both clean and dirty water including particules up to 35mm dia.
The integrated float switch will switch off the motor once the water level is reduced to a defined level. Being intergrated within the pump housing it is usable in a more confined space then when using conventional float switches.
4 products
The Clarke Flood Kit PSP105B puddle pump kit is ideal for clean draining applications in emergency situations including gardens, flooded cellars, sumps and clearing spillages thanks…
The Clarke Flood Kit PSV5A is ideal for heavy duty draining applications in emergency situations including gardens, cellars, sumps, ditches, footings etc. It can be…
The Clarke Flood Kit PSP125B puddle pump kit is ideal for clean draining applications in emergency situations including gardens, flooded cellars, sumps and clearing spillages thanks…
The Clarke Flood Kit PW50A petrol pump is ideal for heavy duty draining applications in emergency situations including gardens, cellars, sumps, ditches, footings etc. It’s…
Frequently Asked Questions
Quick answers to common questions about the Clarke Flood Kit. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.