ABS IP 900 Pumps
ABS IP 900W 230v manual
The IP900W 230V from ABS is a high-grade stainless steel pump for the removal of wastewater containing solids up to 10mm, in accordance with EN12050-2. Vortex hydraulics with 30 mm free passage make it particularly suitable for the pumping of fluids containing gaseous or abrasive particles.
The combination of high-grade stainless steel 1.4401 (AISI 316), static seals of Viton, and mechanical seal of silicon carbide; plus other features, makes this the ideal pump for chemically contaminated wastewater, industrial effluent, and for use in agriculture.
Applications
- Pumping of aggressive media.
- Pumping of clear and rain water.
- For blockage-free pumping of liquids which have a high proportion of solid or fibrous matter present.
- Dewatering of buildings and sites.
- Emptying or filling of containers.
- Suitable for septic tank run-off, for the emptying of flooded cellars, and for drainage.
5 products
ABS IP 900W 230v manual The IP900W 230V from ABS is a high-grade stainless steel pump for the removal of wastewater containing solids up…
ABS IP 900WKS 230v Auto The IP900WKS Auto 230V from ABS is a high-grade stainless steel pump for the removal of wastewater containing solids…
ABS IP 900D 400v Manual The IP900D 400V from ABS is a high-grade stainless steel pump for the removal of wastewater containing solids up…
ABS IP 900DKS 400v Auto The IP900DKS Auto 400V from ABS is a high-grade stainless steel pump for the removal of wastewater containing solids…
ABS IP 900 Pedestal Kit Part no: 62320560 2" Pedestal Kit
Frequently Asked Questions
Quick answers to common questions about the ABS IP 900 Pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.