Clarke HSEC pumps
Clarke HSEC pumps
5 models in the Clarke HSEC pumps.
5 products
Clarke HSEC650A 230v auto 7230290The Clarke HSEC650A is Clarke’s heavy-duty, industrial-quality submersible dirty water cutter pump, designed to handle the toughest applications. Featuring a corrosion-resistant…
Clarke HSEC651A 110v auto 7230295The Clarke HSEC651A 110V is clarke’s truly heavy duty, industrial quality submersible dirty water cutter pump benefits from a corrosion resistant…
Clarke CGP870 1 1/4″ Grinder Pump 7230291With a cast iron body and powerful 870W motor, the CGP870 Grinder Pump is the ideal pump for the…
Clarke CSP1530 2″ Sewage Pump 7230293With a stainless steel body, cast iron base and powerful 1530W motor offering an impressive 500 l/min flow rate, the…
Clarke HSEC1400A 230v auto 7230243The Clarke HSEC1400A 230V is clarke’s truly heavy duty, industrial quality submersible dirty water cutter pump benefits from a corrosion resistant…
Frequently Asked Questions
Quick answers to common questions about the Clarke HSEC pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.