Clarke HSE pumps
The Clarke HSE pumps suitable for pump both dirty and clean water.
11 products
The Clarke HSE361A 110V is suitable for pumping both dirty and clean water. Ideal for pools, fish pond circulation, rain water drainage, waterfalls, fountains, sump…
The Clarke HSE301a is 110v powered industrial quality submersible pump with stainless drive shaft, chrome plated body and 50mm outlet.
The Clarke HSE360 is suitable for pumping both dirty and clean water. Ideal for pools, fish pond circulation, rain water drainage, waterfalls, fountains, sump pitsand…
The Clarke HSE360A is suitable for pumping both dirty and clean water. Ideal for pools, fish pond circulation, rain water drainage, waterfalls, fountains, sump pitsand…
The Clarke HSE200A pump is suitable for pumping both dirty and clean water. It is also ideal for pools, fish pond circulation, rain water drainage, waterfalls,…
The Clarke HSE300 pump is an industrial quality submersible pump with stainless drive shaft, chrome plated body and 50mm outlet.
The Clarke HSE300a pump is an industrial quality submersible pump with stainless drive shaft, chrome plated body and 50mm outlet.
The Clarke HSE pumps suitable for pump both dirty and clean water.
The Clarke HSE pumps suitable for pump both dirty and clean water.
Clarke CHHDP830 1 1/4″ 830w 20m High Head Draining Pump 7230294 With a stainless steel body and powerful 830W motor offering an 180 l/min flow…
Clarke CPCDP500 2″ 500w 12m head portable contractor dewatering pump 7230292 The Clarke CPCDP500 Contractor Dewatering Pump offers a robust and portable design, suitable for…
Frequently Asked Questions
Quick answers to common questions about the Clarke HSE pumps. For technical specifications, see the product details above; for sizing or installation advice, contact our team. If you have any other questions, we're happy to help.
What is a submersible pump?
A submersible pump is designed to operate fully submerged in the liquid it is moving. The motor is sealed inside the pump body and cooled by the surrounding water. Submersibles are used for drainage, sewage, septic tanks, deep wells and boreholes, and for raising water from sumps, cellars and floodwater. Many stocked at Anglian Pumping handle solids in suspension.
Can submersible pumps handle solids and sewage?
Yes – some submersibles are designed for clean water only, others handle solids up to 50 mm or full raw sewage. Anglian Pumping stocks ABS, BBC, Flygt and T-T Submersibles ranges that include vortex, single channel and grinder impellers for different solids handling requirements. Always match the pump to the maximum solid size and the type of effluent it will see.
When should I use a submersible pump instead of a surface pump?
Use a submersible when the water level is more than around 8 metres below the pump installation point – surface pumps cannot self-prime beyond that depth. Submersibles are also better when the liquid contains solids, when noise must be minimised, or when the pump needs to operate in confined spaces such as sumps and chambers where a surface pump would not fit.